What to do if the mouse on your computer gets stuck. Why does the mouse cursor freeze? the reason why the mouse cursor may be slow and glitchy

Answers:

Muhomedianov:
There were similar problems with mice connected to USB, after using an adapter to PS/2 the problem was solved. Even after pulling the tail out of the USB, performance was usually restored. Windows found the device again.

TU-154:
There may actually be a problem with the mouse or its cable. Try another mouse that is known to work.

Basil:
Test the mouse on another computer (or another mouse on this one). The wire at the base of the mouse may have frayed.

Jonya:
I had the same thing. See if the mouse is in the list of devices. And then I poked my head in, and it turned out that I didn’t have a mouse on my computer at all. Disconnect and connect again, reinstall the driver.

Alex:
I went into the properties of the mouse and removed the checkbox in the property: \"Enable increased pointer precision\" - the freezes disappeared.

MBM:
For me it also freezes for 5-15 seconds approximately every minute, sometimes two, and then comes back. It's been like this for 2 months already! I have a DELL notebook. There is a touchpad and a USB mouse. I tried everything: changed mice, bought new ones, the simplest and the most complex ones, disabled and enabled the touchpad, set all parameters to Default, disabled and enabled all possible options, reinstalled drivers, stopped hot key options in all programs, re-read all English-language sites on this topic - tips: check your mouse. Can any of the Russians understand more?

Vipart:
If you are experiencing various problems with your mouse, it is possible that your computer is automatically turning off power to the USB root hub. 1. Open “Control Panel” > “System” > “Hardware” tab, and click on the “Device Manager” button. 2. In the "Device Manager", find the object or objects called "Universal Serial Bus Controllers", open them, and double-click on the first item called "USB Root Hub". 3. In the properties dialog that appears, go to the “Power Management” tab. 4. The “Allow the computer to turn off this device to save power” checkbox is selected by default. Uncheck the box and click OK.

Problems with the manipulator freezing can be of various types. To eliminate the problem, it is necessary to identify its cause as accurately as possible. This is sometimes very difficult to do. That is why, whenever possible, all the nuances should be taken into account. This is especially true for laptops - problems of this type arise most often with compact portable computers.

Causes of freezes

All reasons for a manipulator freezing on a computer can be divided into two main types:

• hardware;
• software.

Software malfunctions are most often associated with drivers, as well as some errors within the system, or a conflict between installed equipment. With hardware errors, everything is usually much more complicated; their number is also significantly greater.

Hardware reasons for a personal computer freezing include:

The list of software faults is somewhat shorter:

• inappropriate drivers installed (old version);
• there is a conflict between different devices;
• The mouse is configured incorrectly.

Video: Setting up a mouse - the beginning

Hardware errors: solutions

The mouse freezes on the computer - what to do? First of all, you need to check whether it is intact. If the mouse has mechanical damage, then there is a high probability that the contact on the board inside has come loose as a result of a strong impact. In the absence of a special soldering station, as well as skills, it is unlikely that it will be possible to eliminate this type of problem.

It often happens that the cause is a broken cable connecting the mouse and the USB/PS2 port. In this case, the easiest way is to purchase a new manipulator, since repairing such a breakdown will cost approximately the same as purchasing a new device.

It often happens that the computer itself (this often happens with a laptop) turns off the power to the USB root hub. This renders the mouse inoperative.

To check this, you should do the following:

If there is a tick there, then you need to remove it. Perhaps the PC is simply turning off the mouse in order to save electrical energy. In addition, you should inspect the USB connector itself as carefully as possible. It often happens that on not very high-quality boards it is poorly soldered. And if handled carelessly, the contact legs simply break.

Software errors: solutions

Hardware problems occur much less frequently. In most cases, the software is to blame. Most modern USB mice are usually detected and installed by the Windows operating system. But this is not always good, since some gadgets have their own specifics. And the standard universal driver does not suit them.

If your mouse freezes, you should use the software provided by the manufacturer with the mouse. Or download official drivers from a reputable resource. In many cases this helps resolve problems of this type.

If after installing new drivers the freezes do not disappear, then you should check the “device manager”. If there are icons next to which there is a question/exclamation mark, you need to reinstall them.

Setting up and calibrating the mouse is carried out as follows:

The driving speed may be set too low. You can check this parameter in “Pointer Options”.

Good day, readers.

Some users encounter a situation where the mouse cursor gets stuck on a personal computer or laptop. To fix the problem, you need to find out the reasons why this is happening. And there are a lot of them. In this case, it is necessary to take into account all the nuances, including the device to which the manipulator is connected.

The first ones are usually associated with accompanying software - drivers. In addition, internal system errors and rare conflicts between connected devices affect correct operation. Or it was simply set up incorrectly.

While all of the above can be fixed relatively easily, hardware errors will be more difficult to “cure”. These include the following ailments:

wire damage;

poor or missing power at the connection port;

problems inside the manipulator.

Hardware errors - elimination()

Regardless of the version of the operating system installed on the computer, be it Windows 7 or Windows 10, the first thing you need to pay attention to is the integrity of the device itself. If suddenly external damage is clearly visible on the component being connected, there is a considerable probability that a chip or other contact failure could have occurred inside the board. Unfortunately, in the absence of the appropriate knowledge and necessary equipment, solving the problem will be extremely difficult.

Sometimes the manipulator turns off as a result of failure of the connected cable. If you know exactly where the break is, there is a chance to fix the problem on your own, although it will not be the most aesthetically pleasing. So, you need to disconnect the component and cut out the problematic section of the wire. Then expose the contacts on the two parts of the cord and connect the corresponding cores to each other. After this, it is imperative to cover each individual “twist” with insulating material - usually adhesive tape is used. And after that everything is hidden under shrink film. Although it would, of course, be more convenient to use the same electrical tape.

Personally, I have restored mice from different manufacturers in this way several times. Of course, this cannot guarantee a long “life” of the component in the future. So after such operations it is better to look for a new element. Well, until then you can get by with “ resurrected» manipulator.

In some cases, the computer automatically turns off the power to the USB port to which the mouse is connected. And this situation occurs more often on laptops than on desktop machines. As a result, the element we need does not perform all the prescribed functions. To check the situation in Windows 8 and other operating systems of upcoming versions, you need to perform a number of actions:

It is worth noting that the same method is also suitable for Windows XP.

Software errors - elimination()

It must be said right away that problems of this kind appear more often. The fact is that most modern manipulators are detected by the operating system automatically, which is not always an excellent option, since some gadgets have their own characteristics. Therefore, the standard drivers provided in the system are simply not suitable.

What to do in this case? You need to use the solution that is offered complete with the element. Or look for the necessary software on the official website. This usually helps solve the problem.

If you notice that the cursor on the screen continues to behave strangely, check your system for viruses. In some situations, malware is the problem. After removing it, everything should work normally.

Well, as you can see, there are many reasons why a cursor might not behave the way it used to. To restore full functionality, you must first find out the cause.

I hope you can solve the problems you are having with your mouse.

The mouse is an integral part of almost any modern computer system. Without it, it is impossible to perform many actions. And it becomes even more unpleasant if The mouse cursor does not move, but the mouse works. That is, the power indicator is on, the device is connected to the computer, but no response to the user’s actions is observed.

And there may be several reasons for this, as well as solutions. All of them can be divided into:

• software problems;
• hardware problems.

Software problems

First of all, to answer the question, what to do if the mouse does not work, we can advise you to wait a little. It is quite possible that the computer simply froze and stopped responding to commands not only from the mouse, but also from other devices.

If this is not the problem, then you can try the following solutions:

• just restart your computer. You might be surprised how many problems can be solved by simply rebooting your PC;
• It is possible that the mouse drivers have crashed. The natural solution is to reinstall them;
• You also need to see if the mouse is detected by the system itself. To do this, by calling the context menu of the “My Computer” icon, select “Properties”. Then go to the “Device Manager” tab and in the window that opens, find “Mice and other pointing devices.” The user's mouse should be visible here. If it is not there, then you can try to reconnect it and, if necessary, reinstall the driver;
• If the problem occurs in a specific program, it makes sense to see if the mouse is set in the settings of that program.

Hardware problems

If all these problems have been tried by method of elimination, but have not brought any results, then the question: what to do if the mouse freezes on the computer remains open.

And in this case, you need to move on to the so-called “hardware” or hardware problems:

• The connecting cable is damaged. You can try to find and repair the gap;
• there is no contact in the computer port. The corresponding connection socket may have become loose. You can try connecting the mouse to another;
• if the mouse is wireless, then the reason may also be due to the accompanying electromagnetic interference. For example, if there is another wireless mouse nearby, or if a powerful source of electromagnetic radiation is operating nearby. It also makes sense to check if the batteries are dead;
• The reason for the non-working state of both a ball and an optical mouse may be contamination of the working surface of the device itself or the mouse pad (or other working surface). Accordingly, you need to clean the mouse, pad, etc.

Advice: if all else fails, the cause of the breakdown is much more serious, you need to take the device to a service center.

However, it can be much easier to just buy a new mouse than to repair an old one.

Hi all! The mouse freezes on the computer, what should I do? I will discuss this question below. The mouse is one of the main components in a computer. Without this device, working on it will be quite problematic. It often happens that a computer mouse stops functioning properly.

The most common “glitch” of a mouse is its freezing. If this happens, there is no need to be nervous and freak out. First you need to find out the cause of the malfunction of the manipulator. This is a rather complicated operation, but in this article I will tell you about everything that needs to be taken into account when repairing your favorite computer mouse.

Before you start repairing your mouse, you need to find out the reason why it is not functioning properly. There are two main types of freezes:

• Hardware;
• Software.

So, if the reason is software errors, then you need to look for problems in the drivers or within the operating system itself. In addition, do not forget about the equipment installed on the computer. Some devices may simply conflict with each other.

As for hardware errors, there are much more of them. Accordingly, fixing them will be a little more difficult than software “lags”.

Now let's look at what hardware errors can lead to slow and freezing operation of your computer:

• First of all, this is a damaged or non-working USB cable;
• If the connection port is not connected;
• Faulty computer mouse;

• Next, you need to remember about the full operation of the USB input. It’s just that some contacts may move away, and accordingly the mouse will work every other time. Until you move the cable or USB jack;

These are the main hardware reasons for the manipulator freezing. If after a step-by-step check the mouse still continues to work incorrectly, then most likely the problem is due to software errors. There may be several of them:

1. First you need to check the availability of the necessary drivers. It often happens that the wrong version is installed, or even an old one;
2. Next, check your mouse settings. It simply may not be configured correctly;
3. Due to the presence of some connected devices, the functionality of the manipulator may be impaired.

VIDEO: MOUSE SETTING - BEGINNING

HARDWARE ERRORS: SOLUTIONS

We have reached the most basic thing - troubleshooting. Before you start accessing the system, make sure that your computer mouse is intact. If it was dropped or hit, it is possible that a contact on a special circuit board inside the device may have come loose. If you don’t have a special soldering machine and the ability to solder, it would be best to leave this mouse or give it to someone who can fix this problem.

One of the common reasons is the breakdown of the cable itself that connects the mouse to the computer. Repairing such a wire will cost you approximately the same price as a new manipulator. Therefore, it’s up to you to decide whether to repair or purchase a new working mouse.

It is also a common error where the computer automatically disconnects from the main USB hub. This is what can render the device inoperative. You can check this by following these instructions:

• You need to open the “Control Panel”. For those who don't know, it's located in the Start menu;
• In the shortcut called “System” you will need to find the “Hardware” tab. Enter this tab;
• Here click on “Device Manager”;
• Visually look for an item called “Universal USB Bus Controller”;

• In this tab, click on “USB hub”;
• Find "Power Management". Click on this item;
• In this tab, you will be able to see the option “Allow turning off the device to save money.” If there is a checkmark next to this item, remove it. The fact is that the computer system can often switch to power saving mode and, accordingly, turn off some devices.

SOFTWARE ERRORS: SOLUTIONS

Although hardware errors do occur, software is much more likely to be to blame for a sluggish computer mouse. Today, a huge number of mice are being created, and almost all of them are automatically detected by the Windows system. However, not all modern gadgets are equipped with the necessary driver and are ready to accept the conditions of a connected mouse. We shouldn’t forget about this either.

It is worth noting that when purchasing expensive manipulators, the kit includes a special disk with the necessary drivers. In addition, they can be downloaded from the official website of the mouse manufacturer. Usually such programs are distributed completely free of charge. After installing these utilities, the mouse can begin to function properly.

If this does not bring you positive results, you need to go to the “Device Manager” menu. If there are errors, some icons may have a question mark or an exclamation mark next to them. You will need to reinstall those drivers that have similar signs next to them.

Now let's talk about customizing the mouse. Many of the users have never encountered this operation before. Now I will tell you in detail and step by step how this is done.

Nowadays almost everyone has a computer or laptop. Agree, it’s quite difficult to imagine your life without this device. And if at home it is primarily a means of entertainment, then at work it is an extremely important tool. To make using desktop PCs and laptops more convenient, a keyboard and mouse were invented. The latter, for some reason, sometimes malfunctions or, to put it simply, freezes. Let's try to figure out what is the cause of this malfunction and how to fix it.

1. Breaking.

The first and most obvious thing that comes to mind is a breakdown. Well, this is quite possible. The mouse itself could be broken, the cable (wireless adapter) could be damaged, and you need to understand whether this is really the case. Carefully inspect the manipulator and wire for integrity. If you have another mouse at home, try connecting it.

1. Connection port.

It is quite possible that the cause of the malfunction is not in the mouse, but in the connector into which you connect it. If this is a standard (PS/2) port, that is, the only one of its kind on the back panel of your PC, the only solution to the problem is to buy a USB or

While working on your computer, you may experience problems such as the mouse cursor freezing, shaking, or disappearing. This can be explained by the fact that the device itself is faulty or there are software failures.

If it freezes, the first thing that comes to mind is to check whether the device wire is properly inserted into the computer connector. It is possible that the USB port to which the mouse is connected is faulty, so you need to try inserting the plug into a different connector. To make sure that the device itself is faulty, you need to take another mouse and check how the cursor moves when working with it.

It often happens that the mouse cursor disappears when foreign objects, pet hair, or dust get into the optical connector. If they cannot be removed completely, the mouse must be disassembled and cleaned. To do this, you need to unscrew just one screw and remove the top cover. All dirt inside should be removed, especially in the area where the beam hits.

If the mouse is wireless, you need to make sure that its batteries are not dead and check the signal strength. Signals from other devices connected via USB ports may interfere with the pointer's operation. In this case, the mouse cursor either freezes, not reacting to movements, or periodically disappears and appears. In this case, you should connect devices, such as a USB modem and a mouse, from different sides of the computer. It is recommended to keep mobile phones away from a running PC.

If the mouse cursor slows down, this does not mean that the device itself is faulty. Perhaps you just need to increase the pointer speed. To do this, you need to go to “Control Panel” through “Start” and open the settings tab in the mouse settings. Here you can change the cursor speed to your liking, but be sure to save the settings.

The mouse cursor may freeze due to viruses damaging system files. In this case, you need to USB through the “Control Panel” in the “Add or Remove Programs” section and install it again. You can find a USB driver on the Internet or download it from the disk that is sold with the mouse. After reinstallation, you need to check the operation of the device.

The mouse cursor may disappear or become unresponsive while using the browser. If this only happens in the browser, then first you need to try reinstalling it.

If nothing has changed, then most likely the problem is with the Adobe Flash Player plugin, so it is suggested to replace the old version with a more recent one. In addition, you can disable plugins in your browser settings, but then you won’t be able to see flash images on websites.

It happens that the mouse cursor freezes when there are a lot of processes running on the computer, which greatly loads the memory and processor. In this case, it is recommended to disable unnecessary processes and remove them from automatic startup.

Sometimes the problem of cursor drawing can be solved by reinstalling the video card drivers, replacing them with newer versions.

In some cases, cursor freezing may be due to the use of animated pointers. To get rid of the problem, you need to select the standard cursor view.

The Sticky Keys feature is intended for novice computer users or people who, for some reason, can press several buttons at once (due to some kind of injury or inability to use one of their hands while working). The average user is unlikely to like this feature. The “complaining” sound is very annoying, and sometimes it can scare the user a little. This is especially often annoying for gamers, because the gameplay usually requires the player to press a certain key multiple times. How to disable sticky keys so that nothing distracts you when working on a PC or while playing a game? Let's look at this process step by step for different operating systems.

Windows 7

The principles for disabling this function are the same everywhere - only the designations and interface differ. The following instructions will help you understand how to remove stuck keys:

1. Open the “Start” panel, then “Control Panel”. Go to “View”, “Category”. There we select “Small icons”.
2. Click LMB (left mouse button) and a new window will appear on the screen.
3. Here you will see the “Ease of Access Center”. You need to go there.
4. Open the “Change keyboard settings” link - there should be a “Make the keyboard easier to use” mode there. Enter it.
5. Look for “Simplify text section” and disable the setting by unchecking “Enable Sticky Keys”.
6. Don’t forget to confirm your action by pressing the “Apply” button for your settings to take effect.

Important! If this does not help, you should go into the input filtering settings in the same menu and uncheck the two fields at the top. Don't forget to save your settings!

Windows XP

All disabling actions occur in almost the same way:

1. Go to “Start”, then “Control Panel”.
2. Find “Special Features” and click on it with LMB.
3. In the window that opens, go to the “Keyboard” tab.
4. In the “Sticky Keys” section, uncheck the box next to “Sticky Keys”, which will solve your problem.

There is another option to disable sticky keys, for this:

1. We cause our “problem” by pressing the “Shift” key five times.
2. A window will open asking you to disable the Sticky Keys feature.
3. To agree, you will need to click the “Options” button and follow the required link to a new tab.
4. In the “Configure Sticky Keys” section, uncheck all the necessary items.
5. Click “Apply” and enjoy the result.

Important! If only the annoying sound bothers you, then in the same tab, find the setting to turn it off.

Windows 8 and 8.1:

1. Open the “Options” link by moving the cursor to the upper right corner.
2. Go to the “Special Features” section.
3. On the “Keyboard” tab, disable the function you do not need.

Windows 10:

• First you need to go to the “Ease of Access Center”.
• In the window we look for “Make the keyboard easier to use”, go there and look for the “Enable sticky keys” checkbox, uncheck it.

Nothing complicated, right? Yes, but there are other types of sticking.

Other types of sticking and how to combat them

Have you yet to disable Sticky Keys? Or are you interested in solving another problem? Then read on!

Mouse gets stuck

Such a function will be useful only when the user needs to select and drag different objects. This tool in the Windows operating system allows you to hold down the mouse button without physical impact.

If you need to disable this feature, do the following:

1. Go to: “Start”, then “Control Panel”.
2. Open the “Printers and other equipment” section.
3. Open the “Mouse” item.
4. There, open “Mouse Buttons” and uncheck the box next to “Enable Sticky” in the “Sticky Mouse Button” window.
5. Click Apply.

Here we have disabled this function for the mouse.

Mechanical key sticking

This kind of problem can be caused by a deformed keyboard, a fall, or debris getting into a key, causing it to be pressed constantly. In the second case, you can get by with assembling and disassembling the keyboard, carefully removing debris from all the cracks - it is advisable to use a special vacuum cleaner. In the first case, you should contact a service center or call a technician to your home.

Important! When cleaning the keyboard from foreign objects that have fallen into the gaps between the keys, do not use water under any circumstances! This kind of action can damage your device beyond the possibility of subsequent recovery by any means.

When cleaning with a vacuum cleaner, you should understand that we are talking about a special vacuum cleaner, the power of which allows it not to deform the components installed on the integrated circuits of the input device.