Intel Core i5 processors for the LGA1151 platform. Intel Core i5 processors for LGA1150 and LGA1151 platforms 1151 which processors

LGA-1151 is a standardized and still relevant socket designed for installing Intel processors with 6th and 7th generation architectures - Skylake and Kaby Lake. To interact with the 8th generation of processors, an alternative version of the socket is provided - LGA 1151 v2, although similar in design to the “original”, but differing in the approach to the organization of contact pads and power circuits, which ensure stable operation of chipsets installed in the motherboard under extreme load or when using non-standard cooling. The remaining characteristics of the connectors are similar - the same spring-loaded contact for contact with the processor, familiar DMI 3.0 and PCI Express 3.0, identical mounting of tower coolers.

The approach is as follows:

• LGA-1151. Core i7, i5 and i3 processors are supported, as well as the 6th and 7th generation Pentium and Celeron series belonging to Skylake or Kaby Lake.
• LGA-1151 v2. Core i7, i5 and i3 and the Pentium and Celeron series are connected, but already of the 8th generation, which are marked Coffee Lake.

Optimal processor

Among the available variety of processors, highlight some individual models more complicated than it seems at first glance. And the main reason for this is lack of information. What is the money ceiling? Will an upgrade be needed in the future? Do you need a gaming platform or an office one? If you don’t go into details and focus on the only indicator - price/quality, then from Skylake it is worth noting the Intel i5 6400T, from Kaby Lake - the Intel Pentium G4620, and from Coffee Lake - the i5-8400.

The second revision of the LGA 1151 socket appeared at the end of 2017, along with the release of Coffee Lake series processors, which, as Intel developers immediately warned, are electrically incompatible with the “original” (due to changes that affected the number of contact pads responsible for power supply , signal transmission and processing of some processes, installation of old-generation processors on a new one is impossible - however, backward compatibility is not provided).

Hence, in fact, the conclusion - the differences between the versions are reduced to the method of organizing power supply and electrical “recharge”. And, since there is a desire to install a Coffee Lake processor, then you will have to look for LGA-1151 v2 motherboards on sale (necessarily with DDR4 support), but if you need Skylake or Kaby Lake, then LGA 1151 with DD3 will do.

Top 10 motherboards with LGA 1151 socket

The choice of motherboard with connectors of the first and second revision directly depends on the number Money and preferred brand, and additional characteristics, such as a built-in Wi-Fi module or support for two or even four PCI-E x16 slots for installing video cards. And therefore, drawing a parallel between recommendations in a similar vein is more difficult than it seems at first glance - the chances of being reduced to subjective advice rather than straightforward help are too high.

Therefore, even before getting acquainted with the top 10 motherboards, you should look into the nearest online store and, having placed the appropriate tags, start searching (you should immediately indicate the price, select the manufacturer and form factor - for example, ATX or Mini-ATX, and at the same time – decide on the sound scheme or slots random access memory). In less than five minutes, there will definitely be suitable options. And then all that remains is to get acquainted with the reviews, read a few reviews and add the model you like to the cart...

Failed to select suitable options? So, it's time to get acquainted with the TOP 10:

1. ASUS B250 MINING EXPERT - an affordable motherboard starting at $200 with a neutral dark gray style and non-standard specialization - the manufacturer ASUS suggests using the B250 model for mining and conducting transactions related to cryptocurrencies. The pluses are four SATA 6 Gb/s ports, 2 slots for DDR4 RAM with a maximum frequency of 2400 MHz.
2. ASRock Fatal1ty H270M Performance is a budget motherboard with a price of 100-120 dollars, a blood-red and somewhat gaming design, Micro-ATX dimensions and support for CrossFire X, which allows for running entertainment using two video cards. Chipset – H270. RAM slots – 4.
3. GIGABYTE GA-Z270P-D3 is a legend of the genre with a price of $90, with support for up to 64 gigabytes of DD4 RAM, two video cards and a special Smart functions Fan 5, which helps control the motherboard temperature and avoid overheating surprises.
4. ASUS PRIME H270M-PLUS is a promising budget board with two slots for a video card, four slots for DDR4 RAM, and the classic Intel H270 chipset. The dimensions of the motherboard are Micro-ATX, which means there will be a chance to build a custom entertainment system of compact dimensions.
5. ASRock Z170 OC Formula is an option from the premium segment with the Standard-ATX size Z170 chipset, which provides for semi-automatic overclocking, four RAM slots that support frequencies up to 4500 MHz, and four connectors for video cards. If you really want to experience unprecedented speeds, then only with ASRock!
6. GIGABYTE AORUS GA-Z270X-Gaming 9 is perhaps the most expensive representative of the genre, with a non-standard server form factor - E-ATX, support for 4 video cards in SLI and CrossFire modes, with a Wi-Fi module, a gigabyte network port, a Bluetooth interface and an unusual a sound card capable of delivering extraordinary musical sensations.
7. MSI H170I PRO AC is an experimental model with a price of 170-200 dollars, high-quality build, a bunch of USB slots and a stylish design that instantly catches your eye.
8. ASRock H110M-ITX is a newcomer to the genre with two DDR4 slots and a price of $70. The advantages are support for RAM up to 32 gigabytes and a MINI-ITX form factor.
9. ASRock Z370M PRO4 is a motherboard with LGA-1151 v2 socket, Z370 chipset and two PCI-E x16 connectors. Price – from 100 dollars. The build quality is excellent. The delivery set is complete.
10. ASUS ROG MAXIMUS X APEX is a gaming motherboard with the second revision of LGA-1151 connectors, a stylish design and a high price starting at $300.

Building your own PC is not easy. The user has to deal with a huge number of problems, especially if he does not understand the process itself. The fact is that the most important factor for the stable operation of the system is compatibility. Not everyone knows or thinks about it, which is why various types of PC malfunctions occur.

Socket

Before you understand the Socket 1151 processor, you need to understand in principle what a socket is and how the processor itself works.

So, in front of you is a motherboard on which you need to install a chip. You cannot buy any processor, since it must be compatible first of all with the socket on the motherboard. Therefore, it is necessary to initially take this parameter into account and follow it.

The CPU connector can be female or slot. It is located on the motherboard and is designed to install the processor itself directly into it.

Previously, many chips were soldered into the motherboard, but such technology has now turned out to be useless, since many users are focused on constantly upgrading the system, and this is impossible to do without removable components.

The connectors differ not only symbolically, but also in physical level: They have different sizes, numbers or types of contacts, as well as different mounting for coolers.

Variety of sockets

There are now a huge number of sockets available for installing processors. This is not surprising, since dozens of new models are released onto the market every year, and this is only from Intel. Each of them requires a specific design, and its shape and dimensions change accordingly, which affects the type of socket.

Previously, the Intel family had a simplified designation of connectors: from Socket 1 to Socket 7. Now these are outdated types, so they are not used in modern systems.

With the active start of processor development, active work began on the possibility of upgrading systems. This is how new sockets began to appear that worked with the Pentium, Xeon, etc. family.

Each of them had its own designation, which was no longer tied to order. For example, Socket 8 was followed by Socket 370, etc. Socket H connectors became the most popular line.

Socket 1151 processor

This connector was specially developed by Intel for its products. It appeared back in 2015, but still remains relevant, despite the fact that Socket 2066 appeared after it.

The socket works with processors based on the Kaby Lake, Skylake, and Coffee Lake architectures. It replaced LGA 1050 as technology required changes.

Socket Features

Intel Socket 1151 processors require a special matching socket, which has 1151 spring-loaded pins. In this way, the chips can be installed using the corresponding contact pads.

Such a connector also affects the characteristics of the motherboard, and therefore the choice of other components. For example, almost all motherboards with Socket 1151 work only with a dual-channel standard for connecting DDR4 RAM.

When choosing a processor on Socket 1151, you should also take into account the presence of DMI 3.0, PCI Express 3.0, etc. interfaces. Despite changes in the socket itself, the mounting CPU cooler has not changed, so it can be transferred from a Socket 1150 based motherboard.

Innovation

In the summer of 2017, it was announced that new processors based on the Coffee Lake architecture do not work with motherboards on socket 1151. It turned out that for them correct operation It is important to have a 300 series chipset. It turned out that the new socket has an identical number of spring-loaded contacts and even identical keys, but is electrically incompatible with the new boards.

Processors based on Socket 1151, which worked on the Kaby Lake and Skylake architecture, cannot be paired with the 300 chipset. But then a refutation appeared from the guys from China, who decided to experiment with the innovation.

As a result, they flashed the BIOS microcode, after which the 7th generation of processors easily worked in tandem with the Z370 chipset. True, there was one oversight: the built-in video core and PCI Express processor port refused to work.

This innovation led to the fact that the compatibility of processors on Socket 1151 was popularly divided into two versions v1 and v2. The most interesting thing is that these versions are now completely incompatible. If you have to choose a processor, you will have to check the list of supported connectors.

How to check compatibility

To avoid making a mistake when purchasing a processor Intel Core on Socket 1151, you will have to do a thorough check. You need to know the motherboard manufacturer and its model. If you don't have a box left, you can find out using the CPU-Z program, which provides almost all the information about your system.

Next we move on to any search engine and enter the received data. In this case, the user will be offered the website of the motherboard manufacturer, which displays all detailed information about the device.

Suitable processors

Which processors are suitable for Socket 1151 version 1? This includes models from the Celeron, Pentium, Core i3, Core i5 and Core i7 line. By the way, the same applies to the second version of the socket.

In this case, there is one feature that will help you when purchasing a Core i3 or higher chip. If you see the first number “7” or lower in the model name, then these processors belong to the first version, which is compatible with older motherboards. If the first digit in the name is “8” or “9,” then this means this is a new generation of Coffee Lake, which requires new 300-series motherboards.

For example, the first version of Socket 1151 includes Core i3 7350K, Core i5 7600K or Core i7 7700K. In this case, the second version of Socket 1151 includes the Core i3 8350K, Core i5 8600K and Core i7 9700K models.

The 300 series motherboards also work with Core i9 and Xeon processors - these are the latest very powerful and productive chips to hit the market.

Popular introduced Socket 1151

Since not everyone can now afford 8th and 9th generation processors, there are no models yet that have gained crazy popularity. The same cannot be said about the simpler, but no less powerful variants of Socket 1151 v1.

The Intel i5 6400T is the brightest representative of the Skylake family. This processor for Socket 1151 has now been eclipsed by other models, but at the time of its release it became a truly interesting solution at a low cost. It offered 4 cores with a frequency of up to 2800 MHz, as well as a low thermal package of 35 W.

For Kaby Lake, the Intel Pentium G4620 became such a hero. Almost everyone who has tried to build a budget gaming PC has heard of it. The model became a cult favorite, offering the features of the Intel Core i3 7100, but at a much lower cost.

The same family includes the good mid-range i5 7400 and the top-end version i7 7700K. The latter, by the way, is still interesting to many players.

For Coffee Lake, the best was the i5 8400. This is a representative of Socket 1151 v2, so it brought innovations with it, and we are not just talking about new motherboards. Along with it, 2 additional cores, automatic frequency increase and stable operation became available.

Cooling system

The cooler for the processor for Socket 1151, as already mentioned, has not changed anything since the time. It was decided to leave the mount the same, so no changes were made in this area. In addition, most new processors come with a native cooler, which will be suitable for the motherboard in any case.

If you want to buy a separate cooling system that would better cope with maintaining the desired processor temperature, then you will have to carefully study the offers on the market. However, most chips have clear descriptions and parameters, thanks to which you can make a choice and purchase the right cooler.

conclusions

So, at this stage, Socket 1151 is a popular processor socket on which many top processors run. In 2017, he purchased his second version, which turned out to be incompatible with the new products of the Coffee Lake family. Thus, Socket 1151 v1 and v2 appeared in domestic online stores. Despite the differences, socket 1151 allows you to install the same cooler on the motherboard, since the mounting has not changed.

To make it easier to distinguish which processor fits this socket, just take a closer look at the family: Kaby Lake, Skylake, Coffee Lake. The first two families belong to the first version of the socket, the third - to the second. Thus, you can determine compatibility by name: take a closer look at the first number of the model, if it is “7” and below, then this is the first version, if “8” and above, it is the second. However, when purchasing, it is better to double-check on the manufacturer’s website that the parameters are correct.

Despite this, some enthusiasts still managed to reunite incompatible processors. But, as a rule, they lose some of their options, which naturally does not have a very good effect on their work.

Testing modern processors of the Core i3 line, we noted that the level of performance demonstrated by representatives of this family has changed noticeably, largely due to the fact that the manufacturer has stopped “clamping” their clock frequencies too much. A similar state of affairs was noted in the top segment, where two peaks clearly stand out in the form of the “old” i7-4790K and the “new” i7-6700K, fortunately in their case the clock frequencies were “allocated abroad” 4 GHz, which is generally for processors Intel is not typical. So much so that since the release of the 4790K, “overclocker” Core i7s simply no longer overlap with the “regular” family, which made them more interesting for those users who are not interested in overclocking. How is it going in the Core i5 segment?

In principle, for many buyers these processors are of maximum interest. The reasons for this are simple - the main sales on the market fall in the $80-$200 segment, i.e. any Core i7, for example, these are processors of any version not for all to the same extent as Celeron or younger Pentiums. Core i3, which are mid-level solutions, are actively promoted (fortunately, the price matches), while Core i5 turns out to be an interesting compromise between the desire to get a quad-core processor and the reluctance to pay too much for it. As we have already seen, on average, the younger modern Core i5 already overlaps with the older Core i3 in terms of performance, but this is on average: in some tasks “gravitating towards multi-threading” they are still faster, despite a significant lag in clock frequency. However, this can be compensated for without such significant costs: in principle, the price difference between the Core i5-6600K and i5-6400 is approximately equal to that when comparing the same 6400 with even the youngest Core i3-6100. So if there are people who are diligently reaching for “at least some” Core i5, then there will be those who will prefer the older model of this family. Especially when purchasing a new computer entirely, the costs of which significantly exceed the cost of the processor itself, making a choice powerful model simpler psychologically. It’s more difficult with modernization - in fact, in this case, you can only count on a performance increase due to “intensive methods” when moving from generation to generation, since clock frequencies here practically did not increase. It’s enough to compare the same 6600K with 2500K five years ago - some 200 MHz at both ends of the range, when the Core i3 or “K” modifications of the Core i7 reached up to 500.

In general, in this segment everything should be fairly “smooth and calm.” Nevertheless, how much is interesting. So today we decided to study the older models of two and a half Core i5 lines, initially realizing that no “miracles” could be discovered.

Test bench configuration

Why are we talking about two and a half lines? Because desktop Broadwells are not fully functional - there are exactly two “desktop” models here: one Core i5 and one Core i7. The latter, as we have already seen, could have become the “flagship LGA1150” if... If it had worked on all boards, if literally a couple of months later a new platform had not appeared, if a year before it the “steroid » 4790K. However, the Core i5-5675C does not have such a problem - as we noted above, both 4690K and 6600K are not that far behind it in frequency. At the same time, the presence of fourth-level cache memory sometimes compensated for the i7-5775C’s lag behind the 4790K (very noticeable), so the “younger brother” may turn out to be second, or even first, in its segment. Even in general-purpose applications - if you focus on the video core, then similar models for LGA1151 this moment still not at all. It is clear that when purchasing a computer primarily for gaming, you need to buy a discrete video card, but if necessary, you can (and, in this case, need to!) save on the processor, but it happens when you just need something compact, not too power-hungry, but capable of, at least without question, relatively successfully coping with at least hits from five years ago. What makes this processor still relevant today?

Unlike 4690K, although the latter may be useful to those who already have a system based on LGA1150, the performance is no longer enough: for example, the tasks being solved have changed slightly. In this case, replacing only the processor is naturally simpler and cheaper than switching to new platform. And in some markets of developed countries, the “old” one may already be given away at significant discounts. Here are at least two reasons why you shouldn’t write off this processor (especially its slightly cheaper “twin brother” with locked multipliers) just yet. For the rest, it’s better to pay attention to the new platform. Accordingly, there will be two processors for it - the youngest Core i5-6400, fortunately we are already familiar with it, and the fastest at the moment i5-6600K.

Testing methodology

The technique is described in detail in a separate article. Let us briefly recall here that it is based on the following four pillars:

• Methodology for measuring power consumption when testing processors
• Methodology for monitoring power, temperature and processor load during testing

And detailed results of all tests are available in the form of a complete table with results (in Microsoft Excel 97-2003 format). In our articles, we use already processed data. This especially applies to application tests, where everything is normalized relative to the reference system (like last year, a laptop based on a Core i5-3317U with 4 GB of memory and a 128 GB SSD) and grouped by areas of application of the computer.

iXBT Application Benchmark 2016

Here we have a situation, the possibility of which was announced a little higher - the fastest Core i5 turned out to be 5675C. However, it cannot be said that his advantage is so great, firstly. Secondly, it will be smaller when using a discrete video card - these GPU programs sometimes, at the very least, use them.

As well as a group of applications for working with photographs. However, it demonstrates the complete triumph of Skylake - not even because the 6600K turned out to be the fastest, but because the slowest Core i5-6400 in the family came close to the 4690K, which was officially the fastest Core i5 just a year ago. In general, we have a growing suspicion that the specifics of recent years (and the main goals in the development of new microarchitectures) can bring major benefits to buyers of mid-range desktop processors. Or budget ones. But the top segment is updated only to the extent that it is, and the older Core i5 models are also already affected by this.

We have already noted some “dislike” previous version to Broadwell processors with fourth-level cache - as we see, nothing has changed. But models for LGA1151, on the contrary, have clearly accelerated. However, not only in this program, so it may turn out that the error corrections that happened in the field of system software and other “little things in life” also had an impact.

Which did not affect this program - the results are very similar to those obtained last year in its earlier version. In principle, this is a completely predictable phenomenon - sudden changes without a significant change in the program code are just less likely. So we are seeing the usual “creeping progress” and nothing more.

The same as in this case. Actually, taking into account the similarity of processors in organization, it is not surprising that on different code they behave approximately the same. The i5-5675C is significantly different from the others, but in two ways: L4 and GPU pull it forward where possible, but lower frequencies than the other two tops pull it back and always. Final result in his case, it can vary within the range of 4690K-6600K. And in special situations - and marry him.

For example, like here. But this is exactly the ideal option for a hierarchically more powerful memory system - it is clear that L4 is faster than RAM. And if we also remember its huge (by cache standards) capacity, then the result is all the more unsurprising.

But file operations are performed approximately the same, since they almost do not directly depend on processors of this class.

As we already wrote, in Broadwell there were enough optimizations to overtake Haswell even at a lower clock frequency, and also the program’s susceptibility to delays and bandwidth memory system available. In general, the older Core i7-4790K and 6700K were greatly “saved” by a serious advantage in clock frequency, however, as mentioned above, there is no such advantage in the Core i5 family. With all the ensuing consequences.

Ultimately, we come to the conclusion that even in general-purpose applications, the 5675C still looks good - it outperforms the 4690K much more than it lags behind the 6600K. Unfortunately, this line did not receive noticeable distribution, and its further development We haven't seen it yet, although it would be interesting. As a result, we arrive at a slightly strange state of affairs. 4690K in general is clear why it is needed - it is somewhat cheaper than the rest of the tests, and is well suited for upgrading almost any system with LGA1150 (you never know - the Core i3 purchased two years ago began to “not be enough” after replacing the video camera, for example), so now sells well. Especially considering the fact that it is calm and has a good attitude towards overclocking (still popular in certain circles). The Core i5-5675C cannot be installed in any motherboard, and it costs as an older (in class) solution for a newer and “promising” platform. In the end, you can buy it, of course, but after measuring it three times. However, what hits all three of today’s heroes the hardest is not this, but the prices of the low-end processors in the line for LGA1151 - 6400 and those adjacent to them. As you can see, they are not that much slower, they are all just as “promising” and noticeably cheaper. In the end, it turns out that older Core i5s can only be useful to overclocking enthusiasts, since their clock frequencies have not increased for a very long time. Unlike the Core i7, where the top model has been the top model for two years now - truly top-end in any usage scenario.

Energy consumption and energy efficiency

Another strong point of the younger Core i5 is its extremely moderate appetite. It is also present in the elders, despite the formally high official heat package, but less pronounced. The younger ones are already easily limited to amounts of energy that not so long ago were sufficient only for dual-core models (and even earlier - only for some of them).

Accordingly, if we remove the results of the Core i5-6400 from the diagram, we see a beautiful and even ladder with approximately equal steps, corresponding to the change of generations. For the i5-5675C it’s even winning, but due to a change in the technical process. However, it’s worth taking into account not only older, but also lower-end processors for LGA1151, and suddenly it turns out that even without changing production standards you can achieve very good results, if you don’t chase performance too much. Actually, this is what made the older Broadwell models a niche solution literally right away: the practical readiness of a more efficient new microarchitecture did not leave these processors a chance for a long and happy life.

iXBT Game Benchmark 2016

However, this development of events gives reasons not only for joy, since so far only processors with GT2 GPUs are on sale for LGA1151. In practice, as we see, this is the same level of performance as that of the “socket” Haswell, but cannot be compared with the GT3e Broadwell (we decided today to do without detailed results, since we have observed them more than once, and they are also in the table there too). However, if you purchase a computer based on gaming use, of great importance it doesn't - you still can't do without a decent discrete video card. It’s better to save on the processor - a pair of Core i3-6100 with, for example, a Radeon R7 370 will blow away any modern integrated graphics to pieces and in half. But if the priority is the compactness of the system, and games - insofar as, this is where such a solution would come in handy. But it exists so far only for a platform that is leaving the market.

Total

So, what do we end up with? As we have already established, during their existence in the “historical period”, processors of the Pentium and Core i3 families have noticeably increased their performance thanks not only to intensive methods, but also to a banal increase in clock frequencies. In principle, they were ready for this before, but the manufacturer specifically limited these models in order to avoid unnecessary competition with the more expensive Core i5. A similar approach was applied to the Core i7, only the clock frequencies of not all models increased there - it’s just that in 2014, the “overclocker” series separated from the main family, “passing” the 4 GHz mark. But Core i5 actually remained at the level reached five years ago with all the ensuing consequences. Of course, the productivity of representatives of this family grew, but at a much slower pace - only thanks to architectural changes. Or thanks to the introduction of another cache memory level, which has not yet been implemented within the LGA1151. However, the approximate effect of this can be estimated - as we see, it is not so small.

Hello, technoblog readers. Today I will tell you which processors are suitable for socket 1151 (Skylake, Kaby Lake), as well as 1151v2 (Coffee Lake). In this article we will try to talk about the most powerful, inexpensive and inexpensive Intel Core, Pentium and Celeron chips.

The list of CPUs will be arranged in a list so that you have a more accurate idea of ​​the models on the market.

And yes, it’s worth making an important clarification: socket LGA1151 does not imply backward compatibility with 1150 and does not support Xeon server processors.

Processor compatibility table

Socket 1151 from Intel is very insidious in its essence, since it has 2 versions: the first supports chips of the 6th and 7th generations, and the second - only the 8th. In terms of attitude, the picture is much simpler, but this is not about him.
Let's see which ones, as well as i3, i7, Pentium and Celeron are capable of running the 1151 Gen 1.
Now let's look at the line of chips that will fit a motherboard with socket 1151v2.
In 2018, 9th generation CPUs were added to the previous list.

Optimal processor for its price

Now comes the most interesting part of the comparison. We have indicated which processor is suitable for a specific socket. Now it remains to decide on the model of the chip itself. If you want to learn more about CPUs, we recommend reading this article.
Now let’s take a look at the brightest representatives of the 6th, 7th and 8th generations:

Skylake– Intel i5 6400T engineering sample. In my time this processor made a lot of noise because it had an extremely low cost, 4 productive cores with a frequency of up to 2.8 GHz and a very modest thermal package of 35 W.

Kaby Lake– Intel Pentium G4620. The so-called “Hyperpen” became a cult among gamers at the time of its release, as it offered the functionality of the Intel Core i3-7100 at a significantly lower cost. It is also worth mentioning the peppy mid-range i5-7400 and the top-end version i7-7700k, which has 4 cores and 8 data processing threads. The stone is still considered a relevant, powerful and interesting solution for progressive systems, and also supports overclocking up to 5 GHz with a multiplier.

Coffee Lake– i5-8400. The advent of the 8th generation of Intel chips added not only a new socket, but also 2 additional cores for each line, with the exception of Celeron and Pentium. Having a 6-core processor that can automatically increase the frequency from 2.8 to 4 GHz is a very successful investment in the future and therefore I confidently recommend it (at the prices of the i5 you can figure this out (especially since many people are familiar with this discounter as a reliable and verified seller)).

Difference between1151 and 1151v2

It has long been no secret that the processor socket designed for system logic sets of the 100th and 200th series is completely incompatible with the 300th. And it's not even that Intel wants to make more money. The introduction of additional cores forced engineers to radically rework the power supply circuit of Coffee Lake processors to ensure stable operation of the chips, even under extreme overclocking.
Key changes affected the VCC (power) and VSS (ground) pads. At the same time, the number of previously reserved RSVD contacts has decreased slightly. So the situation is as follows:

As you can see, it is physically impossible to “make friends” of old chips with new motherboards, just like plugging a Chinese plug into a European socket. Yes, there are enthusiasts who managed to get Kaby Lake on the Z370 by BIOS modifications, however, the lion's share of functions in this case worked unstable, and the rest were completely absent.

So if you have a lot of free time, you can try it, but I strongly do not recommend it.

I hope that the article was useful to you, so comment and share with your loved ones. See you in new articles. Bye.

Socket 1151: which processors are suitable

Socket LGA 1151 is the current socket for installing Intel processors. It is on Socket 1151 that all the latest consumer-class Intel processors are installed. In this article you can find out which processors are suitable for Socket LGA 1151 and what you need to do to avoid making a mistake when buying a processor.

So, Socket LGA 1151 is a socket for Intel processors with Skylake, Kaby Lake and Coffee Lake architectures.

• Skylake is the sixth generation of Intel Core processor microarchitecture. According to the Tick-Tock strategy followed by Intel company, this architecture has received significant changes and improvements, but without switching to a new technical process. Like the Broadwell architecture, the Skylake architecture uses a 14 nm process technology. The first Skylake chips went on sale in August 2015. The main features of the Skylake architecture are: support for Thunderbolt 3.0, support for 512-bit vector instructions AVX 3.2, support SATA Express, new DMI 3.0 bus, built-in image processor.
• Kaby Lake is the seventh generation of Intel Core processor microarchitecture. According to the Tick-Tock strategy, Kaby Lake is an improved version of the Skylake architecture on the same 14nm process technology. The first processors of this generation went on sale at the beginning of 2017. The main features of the Kaby Lake architecture are: USB support 3.1, support for Intel Optane memory, support for HEVC (H.265) and VP9 video encoding formats, support for HDCP 2.2 technology, official compatibility only with Microsoft Windows 10.
• Coffee Lake is the eighth generation of Intel Core processor microarchitecture. According to the Tick-Tock strategy, the Coffee Lake architecture is an improved version of Kaby Lake with the same 14nm process technology. The first processors of this generation began to be sold on October 5, 2017. The main features of the Coffee Lake architecture are: increased number of cores, technology Turbo Boost 2.0, support for USB 3.1 Gen 2 up to 10 Gbps, support for Intel Wireless-AC, support for new Intel generation Optane.

Below you will find a list of all processors that were produced in Socket 1151. This information can be used to initially select a processor for the motherboard. But, before deciding to purchase a processor, you need to check on the motherboard manufacturer’s website whether the processor you choose is supported by your motherboard. Since the matching socket on the motherboard and processor does not mean that they will work together. For example, processors of the eighth Core generation(Coffee Lake) can only work with 300 series chipsets. The situation is similar with server Xeons; they only work on motherboards with server chipsets.

Celeron processors for Socket LGA 1151:

Pentium processors for Socket LGA 1151:

Core i3 processors for Socket LGA 1151:

Core i5 processors for Socket LGA 1151:

Core i7 processors for Socket LGA 1151:

Xeon processors for Socket LGA 1151:

It should also be recalled that at the time of writing, Socket LGA 1151 is the current platform and new processors may still be released on it in the future. If such processors appear, the information in the article will be updated.

How to check processor support on the manufacturer's website

As we wrote above, the ability to install a processor on a motherboard does not guarantee that this processor will work with it. Therefore, before purchasing a processor, you should always look at the list of supported processors on the motherboard manufacturer’s website.

This is done very simply. First you need to find out the manufacturer of your motherboard and accurate name models. This information can be obtained from CPU-Z program on the "Mainboard" tab.

After this, you need to study the information on the motherboard manufacturer’s website. There should be a list of supported processors. Typically this list can be found in the "Support" or "Support" section.

The processors from this list are 100 percent supported by the motherboard and can be purchased with confidence.

comp-security.net

Which processors are suitable for socket 1151 and 1151v2

Hello, technoblog readers. Today I will tell you which processors are suitable for socket 1151 (Skylake, Kaby Lake), as well as 1151v2 (Coffee Lake). In this article we will try to talk about the most powerful, inexpensive and inexpensive Intel Core, Pentium and Celeron chips.

The list of CPUs will be arranged in a list so that you have a more accurate idea of ​​the models on the market.

And yes, it’s worth making an important clarification: socket LGA1151 does not imply backward compatibility with 1150 and does not support Xeon server processors.

Processor compatibility table

Socket 1151 from Intel is very insidious in its essence, since it has 2 versions: the first supports chips of the 6th and 7th generations, and the second - only the 8th. Regarding the AM3 socket, the picture is much simpler, but this is not what we are talking about.
Let's see which i5 processors of different generations, as well as i3, i7, Pentium and Celeron processors are capable of running the 1151 Gen 1.
Now let's look at the line of chips that will fit a motherboard with socket 1151v2.

Optimal processor for its price

Now comes the most interesting part of the comparison. We have indicated which processor is suitable for a specific socket. Now it remains to decide on the model of the chip itself. If you want to learn more about CPUs, we recommend reading this article.
Now let’s look at the brightest representatives of the 6th, 7th and 8th generations:

Skylake – Intel i5 6400T engineering sample. At one time, this processor made a lot of noise because it had an extremely low cost, 4 productive cores with a frequency of up to 2.8 GHz and a very modest thermal package of 35 W.

Kaby Lake – Intel Pentium G4620. The so-called “Hyperpen” became a cult among gamers at the time of its release, as it offered the functionality of the Intel Core i3-7100 at a significantly lower cost. It is also worth mentioning the peppy mid-range i5-7400 and the top-end version i7-7700k, which has 4 cores and 8 data processing threads. The stone is still considered a relevant, powerful and interesting solution for progressive systems, and also supports overclocking up to 5 GHz with a multiplier.

Coffee Lake – i5-8400. The emergence of the 8th generation of Intel chips added not only a new socket, but also 2 additional cores for each line, with the exception of Celeron and Pentium. Having a 6-core processor that can automatically increase the frequency from 2.8 to 4 GHz is a very successful investment in the future and therefore I confidently recommend it to you (and at the same time there is an interesting offer for you - Intel Core i5 8400 + Free shipping).

Differences between 1151 and 1151v2

It has long been no secret that the processor socket designed for system logic sets of the 100th and 200th series is completely incompatible with the 300th. And it's not even that Intel wants to make more money. The introduction of additional cores forced engineers to radically rework the power supply circuit of Coffee Lake processors to ensure stable operation of the chips, even under extreme overclocking.
Key changes affected the VCC (power) and VSS (ground) pads. At the same time, the number of previously reserved RSVD contacts has decreased slightly. So the situation is as follows:

As you can see, it is physically impossible to “make friends” of old chips with new motherboards, just like plugging a Chinese plug into a European socket. Yes, there are enthusiasts who managed to get Kaby Lake on the Z370 by modifying the BIOS, but the lion's share of functions in this case were unstable, and the rest were completely absent.

So if you have a lot of free time, you can try it, but I strongly do not recommend it.

I hope that the article was useful to you, so subscribe, comment, and share with your loved ones. See you in new articles. Bye.

Sincerely, Andrey Andreev

infotechnica.ru

characteristics, processor support, comparison with other sockets

LGA1356, also known as Socket B2, was released in 2012 and replaced socket 1366. It has many similarities with the now popular LGA2011, but is somewhat simplified in comparison.

Main differences:

• Memory controller supports 3 channels instead of 4
• The number of PCIe lanes supported by the processor controller has been reduced to 24 (40 in LGA2011 processors)
• Only 1 QPI bus, maximum multi-processor configuration includes only 2 stones (up to 4 can be used on socket 2011)

Comparison of sockets 1366 - 2011 - 1356

What processors are supported

Lga1356 works with processors based on the well-known Sandy and Ivy Bridge architectures. Performance is extremely close to similar stones for socket 2011.

Sandy Bridge

Ivy Bridge

What are the prospects for the socket now?

Unfortunately, it seems that all the stones have their multiplier locked, which makes overclocking virtually impossible. However, models with the most high frequency may well be considered the initial gaming solution. Processors with 8 and 10 cores, but with a low frequency, are well suited for work.

Three-channel DDR3 memory will allow the speed to approach the initial two-channel DDR4. At the same time, DDR3 ECC modules are now the most affordable.

The main problem now is the lack of high-quality motherboards, but one can hope that the Chinese will quickly launch production, as they did with the 2011 socket. The first Chinese motherboards are already on sale.

A short summary

Apparently, this is a simplified version of the 2011 socket.

Advantages:

• Cheap processors and RAM
• Three-channel memory
• A budget gaming build will be cheaper than on LGA2011

Flaws:

• Motherboards few and they are still quite expensive
• Not all processor models can be easily found on sale
• No gems with unlocked multiplier, virtually no overclocking
• Less space for further upgrades

xeon-e5450.ru

Intel processors. Performance rating for the LGA1151 platform

This article will review the most current Intel processors. The rating of their performance given below will indicate whether one or another model belongs to a certain niche of the semiconductor chip market.

Celerons are Intel's least powerful desktop processors. Their performance rating indicates that they are only suitable for office use. computing systems, which are capable of solving only the simplest tasks: text and spreadsheet programs, browsing websites, playing multimedia and reading books in electronic form.

This family of chips includes 3 models: G3930T, G3930 and G3950. The key difference between them is the clock speed. The younger model operates at 2.7 GHz, the middle one at 2.GHz and the older one at 3.0 GHz. Among other features of this series of CPUs, it is necessary to note the presence of 2 computing modules and a 2 MB third-level cache. The price for the younger models is 42 dollars, and for the older one - 52.

Average level

Pentium and Core i3 are mid-range Intel processors in terms of performance and cost. The rating of these semiconductor solutions indicates their similar affiliation. Pentium chips are labeled G45XX or G46XX. Their initial clock frequency is 2.9 GHz, and the maximum is 3.7 GHz. Higher performance compared to the Celeron series CPU is ensured by an increased clock frequency, an increased third-level cache to 3 MB and support for NT technology.

The presence of the latter allows these chips to process software in 4 threads. Core i3 chips are designated 71XX and 73XX. The difference from the younger family in this case is the volume of level 3 cache, which is 4MB.

High performance chips

The high-performance Intel processor core consists of four physical code processing units. This CPU family includes i5 and, of course, i7 chips. In the first case, semiconductor solutions are labeled 7400, 7500 and 7600. Their cache at the third level is 6 MB. TurboBust support is also implemented, due to which the chip frequency is dynamically adjusted. The difference between i7 and i5 is the increased cache at the third level to 8 MB and NT support. That is, i7 is capable of working with program code in 8 threads. As a result, the latest CPU family has a 15 percent increase in performance in tests.