How to burn an ISO file to disk. How to burn an iso image to disk in windows without using programs. A detailed algorithm on how to burn iso images to disk

" the question was asked: "How to burn a downloaded image to disk?".

I answered this question, but decided to make a more detailed tutorial on how can you even use a disk image on a computer?

What is a disk image?

Disk image (image) - this is a file that contains a complete copy of a CD, DVD, section hard drive, flash drives, etc.

A disk image is usually presented as a file with the extension .ISO, but there are also other types of images - NRG, MDF, MDS and others.

So, if you downloaded a disk image, then you can:

1. Burn the image to disk (CD or DVD);

2. Extract image contents to HDD;

3. Make a virtual drive and load a disk image into it.

Let's look at these options in more detail:

Option 1- Burn the image to disk.

To burn an image to a disc (CD/DVD), you can use any disc burning program.

Let's look at an example of a program entry CDBburnerXP.

You can download it on the official website: https://cdburnerxp.se/ru/home

After installing and launching the program, select the option "Burn ISO image" and click "OK":

In the new window, using the "Browse" button, specify the image file that you want to burn to disk.

The recording process will begin.

Once the disc has finished burning, the recorded data will be checked. If there are errors, you will see a corresponding message.

Option 2 - Extract the contents of the image to your hard drive.

This option will be useful in cases where you do not need to use the contents of the entire image, but want to access specific files that it contains.

In this case, it is easier to copy these files (extract them from the image) to your hard drive and delete the image if you no longer need it.

If you have installed file manager"Total Commander", then the easiest way to perform this operation is with it, since it can work with images and archives, as with ordinary folders on a computer.

To do this, just go into the image and copy necessary files, or the entire image to your hard drive.

If you do not use Total Commander, then You can extract the contents of the image using an archiver.

Let's consider this operation using the example of an archiver WinRar.

You can download WinRar on these sites: http://www.rarlab.com/download.htm and http://www.win-rar.ru/download/

Launch WinRar and find the image file on your computer using these buttons:

Select the required files/folders or the entire contents of the image (press Ctrl+A on your keyboard) and press "Extract":

In the new window you need to specify the path to extract files from the archive (image):

If you leave the default path, the files will be extracted to the folder where the disk image is located (1) .

You can also choose a different location to extract files (2) . Once the path is specified or left as default, click "OK" to extract files.

After this, you will see the process of copying files from the image to your hard drive.

Option 3 - Create a virtual drive and mount the disk image into it.

Virtual drive- this is a device that is recognized by the system as a regular disk drive.

Such a drive is created using software, for example, DAEMON Tools .

This method is convenient because, firstly, you do not need to write the image to disk, and secondly, the disk in a virtual drive works faster than in a regular drive.

Let's look at how to create a virtual drive in the DAEMON Tools program.

You can download the program from the official website: http://www.daemon-tools.cc/rus/downloads

To download, select free version Lite:

After installing DAEMON Tools, launch it and go to the tab "Images" (1):

Now you need to add disk images to the program.

In area (2) where the disk images will be displayed, click right button mouse and select "Add Images" or "Scan PC for Images".

Selecting "Scan PC for Images" will scan your entire computer for images, which may take time. Therefore, it is easier to specify the image yourself by selecting "Add Images".

After selecting the images, they will be displayed in the program like this:

In order to load a disk image into a virtual drive, right-click on it and select the command "Mount" (1) :

You can also click the button "Quick Mount" (2), select the image on your hard drive (without first adding it to the DAEMON Tools directory) and thus quickly mount it.

The mounted images will appear in the lower area of ​​the program:

They will also appear in Windows Explorer, like conventional drives.

Accordingly, you can work with images in a virtual drive the same way as with regular disks - autorun the disk, open the contents in Explorer, copy files, etc.

If you need to “unload” a disk from a virtual drive, then it must be “unmounted”.

To do this, hover over the mounted disk image and click the red button:

Or right-click on the mounted image and select the command "Unmount".

The image will be “unloaded” from the virtual drive, after which it will no longer be displayed in the lower area of ​​DAEMON Tools and Windows Explorer.

In this case, the image itself will remain in the program directory:

To remove an image from the DEAMON Tools directory, you need to right-click on it (1) and in the context menu (2) select item "Delete":

The image will be deleted from the program directory, but it will remain on the hard drive.

Well, these are the operations you can perform with disk images on your computer.

I hope the lesson was useful and you can burn the image or load it into a virtual drive. If there are any questions left, then all these issues are discussed in more detail.

If you are not confident in your abilities, then using the materials in this article, you can learn how to correctly burn an ISO image Windows 7 or Windows 10(the process is the same for both Windows versions) to a DVD using the program Ultra ISO, Nero or free software BurnWare Free.

Introduction

How to burn an image to UltraISO

If you haven't installed it yet UltraISO program, then you can download it from the link above. Then you will need to install it. Installation is very simple and takes place in literally 3 mouse clicks. You can leave all settings (checkboxes) as default.

1. The program is paid, but you can use trial period. In the "Welcome!" window just select the appropriate item - Trial period...(picture 1).

   
   Picture 1. Trial version UltraISO is enough to burn an ISO image of windows 7 or windows 10 to disk
   

2. After starting the program you need to select the menu item “Tools” → “Burn CD image...”(Figure 2). Wrong just drag and drop the image into the list of files, because... you write down the image file, and we need to burn it content to the disk so that it becomes bootable.

   
   Figure 2. Select the menu "Tools" → "Burn CD Image..." to burn an ISO image

3. In the recording window that opens, use the button «...» , as shown in Figure 3, and select the ISO image on your hard drive.
4. It is important to choose the correct disc writing speed. If you are using a rewritable disc (DVD-RW), then you can leave the maximum speed. Otherwise, it is better to set the speed to x4 or x8 (for older DVD drives possibly less) to minimize the risk of damaging the disc during recording.
   

   
   Figure 3. Use the "..." button to select an image file on your computer.

5. Click on the button "Record"(it is circled in Figure 3).
   When recording to a rewritable disc, formatting will be required, which will take an additional few minutes.
   Wait until the disc is burned - the corresponding information will appear in the program (see Figure 4)

   
   Figure 4. Results of burning a disc using UltraISO.

6. The disk with the Windows 7 or Windows 10 image is ready for installation.



Burning a Windows 7 image to BurnAware Free

BurnAware Free is a free and high-quality program for burning data to CD or DVD discs. Let's look at how to burn a Windows image using it.

1. First of all, install this program on your computer and run it. (Figure 5).

   
   Figure 5. Main menu BurnAware Free

2. You will see an item called “ Burn ISO image", click on it. After this, the following window will open:

   
   Figure 6. Selecting a Windows 7 image to burn

3. Specify your image file. To do this, click “Select”.

   
   Figure 7. Windows 7 image selection window

4. If you have several CD/DVD drives installed on your computer, you need to indicate in the line "Drive-assignment"- the one in which it is inserted empty disk. Settings in item "Options" It is advisable to leave it unchanged.
5. To start recording the image, click "Record" in the upper right corner of the window and wait for the operation to complete.
6. If an error appears "Disk not inserted", make sure you have chosen the right burner and remember to insert a blank disc.

   
   Figure 8. Message indicating that there is no disk in the drive.

7. Once recording is complete, the disc is ready to be Windows installation 7 or Windows 10

Burning a Windows 7 Image to Nero Burning

Nero Burning Rom- a very well-known and proven program for burning discs. If this is exactly what you have on your computer, then below you can familiarize yourself with the steps you need to perform to record an image of Windows 7 or Windows 10 for later installation.
1. First of all, install this program on your computer and run it (Figure 5):

   
   Figure 9. Starting to burn a disc with Windows 7 or Windows 10.

2. And first of all, click “Cancel”, then go to main screen programs.

   
   
   Figure 12. Setting disc burning settings
   The first tab, “Info,” provides only brief information about the project being recorded. The second tab “Recording” has a number of settings. Let's take a closer look at those that are necessary to record our image:

   - Recording.

   - Disc burning (enabled by default).

   - Finalize CD - for this mode this function is not active, the disc is finalized automatically.

   - Write speed - select the disk recording speed.
   The recording speed is automatically adjusted to the maximum speed supported by the blank CD. The value of this parameter depends on the type of CD being written.
   Choosing the right speed is necessary to minimize the risk of errors when burning a disc, so it is better to wait longer, but burn the disc without errors. We already wrote above that if you are using a rewritable disc (DVD-RW), then you can leave the maximum speed.
   Otherwise, it is better to set the speed to x4 or x8 (for older DVD drives, perhaps less) to minimize the risk of damage to the disc during recording.
   Also look carefully at what maximum speed entries are indicated on the disk itself (for example: x2, x4, x8, x16). It is better to divide this speed by 2 or 4.

   - Number of copies - the number of discs you want to burn simultaneously.

3. After selecting all the settings, click “Burn” to burn our image.
4. Installation Windows disk ready!

Why is it better to use third-party programs to record an image rather than the built-in mechanism of Windows 7

Starting with Windows 7, Winodws has built-in mechanisms for burning CD or DVD discs.
But their quality leaves much to be desired: recording standard mechanisms Windows often leads to damage to CDs or DVDs, so it is better to use well-known programs that have been tested by time and millions of users (although even they sometimes fail).

There are a lot of different file formats, one of them is ISO, which is a specially created copy of a disk with all the information that it contained. If you record this file to disk, the entire file structure that was on the original media will be preserved. The image can be obtained in many ways, one of them may be downloading from a website. So, in this situation, the question of how to disk is very important.

When beginners work with images, two cases occur quite often. The first involves the user downloading an image file and then simply writing it down like a regular one. The second is due to the fact that the image file is quite easy to open with an archiver, which leads to the user unpacking it and writing the files. It is worth saying that with any of these options the disk will not work.

So, if the question of how to burn ISO to disk has become quite relevant for you, then we can say that standard ones are quite capable of coping with this task. You need to choose the optimal disk option depending on the size of the file prepared for recording, as well as on the capabilities your drive through which recording will be carried out. Once the disc is selected and inserted into the drive, you can open the My Computer folder, and in Explorer, find the file that needs to be burned and double-click on it. The process will start after you click on “Record”, and if the checkbox was checked in the field offering verification, then the whole procedure will take a little longer. This concerns the question of how to burn an ISO to a disk using the operating system.

For those who doubt their ability to do this procedure In this way, we can offer another option. Speaking about how to burn ISO to disc, you need to note the possibilities specialized programs. On this moment There are a sufficient number of them, but there are a number of the most popular among users: ImgBurn, CDBurnerXP, Nero and others. You can consider how to burn ISO to disc using the CDBurnerXP application. When the program starts, the user is provided with a list of actions that he can perform. Here you should select the appropriate item, and then click “Ok”. Next you will need to select the desired image disk. For example, you can burn a Windows 7 image to a disk or some other disk. In the same window, select the drive that is suitable for the specified procedure, as well as the appropriate writing speed. Immediately after selecting and installing all the settings, you can begin the process. The recording progress will be displayed in a special window.

One more convenient program Nero is the solution to this problem. Its distinctive feature can be called a fairly simple and understandable interface, which should not cause any problems when working. When opening the program, you must select the drive and load the desired project for recording. After setting the necessary parameters, you can proceed directly to recording.

As you can see, there are no particular difficulties in burning ISO to disk.

There is no need to say what the UltraISO program is, every user is perfectly familiar with it software. She gained such popularity for a reason. This program contains a bunch of tools for working with removable media, virtual drives and image files. However, its interface is not very clear for a beginner and it is quite difficult to understand all the abundance of possibilities. Unfortunately, it won’t be possible to talk about everything at once in one article, since there is a lot of information, but this article will tell you how to burn an image to a disk using UltraISO.

Burning an image to CD/DVD media

So, first, let's figure out how to burn an image to disk using UltraISO. To do this, you will need:

Insert the disc into the computer's drive and open the program.

Add an image. To do this, click "File" and select "Open" from the menu. In the explorer that appears, navigate to the image.

Click the "Tools" button located above the toolbar.

In the menu, click on "Burn CD image".

Set recording options. Specify the drive where the disc is inserted. If you only have one, then this step does not need to be completed. Set the recording speed. It is recommended to choose the maximum one to speed up the recording process. Do not change the recording method. In the line "File image" the path to the previously selected file should be laid out; if it does not match, then change it.

If the disk is RW, that is, rewritable, then click the “Erase” button.

Click the "Record" button.

After all the steps, recording will start, you can tell by the sound of the drive. So you have learned how to burn an image to disk using UltraISO. However, as stated above, this program has many functions, and the one presented above is just one of them. Next, we will tell you how to write an image to a flash drive and how to create bootable USB flash drive or disk, so we advise you to read the article to the end to learn as many functions of the program as possible.

Recording to Flash Drive

Now let's figure out how to burn an image to a disk via UltraISO on a flash drive. This is done as follows:

Open the program with administrator rights.

Click the "File" button and select "Open".

In the Explorer window, navigate to the image file and click “Open”.

Now, above the toolbar, click “Boot” and from the menu select “Burn Hard Disk Image”.

In the window that appears, you need to make settings in accordance with the image that will be attached below this list.

Then the recording will start. The process may take a while, but during this time you can use the rest of the system components. As a result of the recording, the system will produce a characteristic sound.

Creating a bootable USB flash drive

The methods described above were how to burn an image to a disk using UltraISO and an image to a flash drive, but most often the program is used for recording boot image operating systems. The program copes with this very well. Now we will analyze in detail the instructions on how to burn a Windows 7 image to disk via UltraISO. By the way, the instructions will be general for other versions of Windows, and not just for the seventh.

So, before you burn the image to disk via UltraISO with autorun, you need to:

Launch the program by first inserting a flash drive or disk into the computer.

Click the "File" button and select "Open" from the menu.

In the Explorer window that appears, you need to open the folder in which the OS image you prepared is located, select it and click “Open”.

Above the toolbar, click the "Boot" button.

In the menu, click on the line "Record" image of a tough disk".

Now format the flash drive or erase the disk and click on the “Burn” button, which is located next to “Format”.

As a result, you need to wait for the recording to finish. This will be indicated by the line in the process log “Recording completed”. After this, you can take the drive out of your computer and use it for your own purposes.

Conclusion

As you can see, you don’t need much experience to burn an image to a disk or flash drive using UltraISO. By following the instructions included above, this process can be completed in just a few minutes. It is significant that for each method the instructions are almost identical, so the likelihood of confusion is reduced to a minimum.

But about burning an image to disk not yet and we will talk about this today...

You can record different ways and for this reason we will consider 2 methods, the most popular and reliable! So, how to burn iso to disk:

How to burn an iso image to disk using Nero

Iso disk image has become the most popular image format; every game or large program in a torrent is packaged in an image. And to install you need to either unpack it or burn it to disk.

I use nero micro, nothing extra, you can download from my cloud:

When installing, you can immediately install only nero express, it will be enough to make an ISO recording.

After installing and launching the program for burning an iso image to disk, you will see a menu. With it you can record music and video and regular files, but we will need the Image item - record image.

We choose and all that remains is to choose the speed so that the recording occurs efficiently. To do this, click on the checkbox and select the minimum entry itself. Then the record button! And the entire image will be on disk in a couple of minutes.

Burning iso to disk using UltraISO

This program is good because it can write an image both to a disk and to a flash drive, and it has more advanced functions for this. Download and install...

After installation, at the bottom of the program, select your image.

Then click tools - burn a CD image.

Next, select the minimum recording for quality. If you select Track-at-Once rather than Disk-at-Once, you can add to the disc, but keep in mind that some devices may not read a multi-session disc. Well, everything else must be selected. Write it down!

After recording, the image will be recorded! With these 2 programs, you can burn the iso image to a CD or DVD!