Box for replacing DVD with ssd. Replacing the DVD drive with a solid state drive. What is needed for installation

SSD disk (solid state drive) is increasingly considered by users as replacing hard laptop drive or as an addition to it. However, the laptop's limited internal space makes installation a challenge. One way to overcome the lack of space is to install an SSD instead DVD drive.

Why is this needed and how does it work?

Many users view the DVD drive as an outdated and unnecessary part. Therefore, it is quite natural to want to remove it from the laptop and use the free space more rationally.

One of possible options– replacing the DVD drive with a solid-state drive using special “sleds”. Installing it in laptop, the owner receives a significant productivity gain. Thanks to the higher speed of information exchange, the operating system, programs and games installed on the disk load 4-5 times faster. At the same time, the laptop becomes less sensitive to shocks and vibrations. Solid state drives have low power consumption, which increases battery life.

What you need for installation

Before installing an SSD into a laptop, it should be recalled that the manipulations performed are related to access to laptop internals. This may damage warranty stickers and seals, which will void the warranty. Therefore, if the warranty period has not expired, this upgrade is not recommended.

For installation hard drive Instead of a disk drive in a laptop you will need:

Which adapter should you choose?

First of all, you need to measure thicknessDVDdrive. Drives are available in thicknesses of 9.5 mm and 12.7 mm.

It is necessary to establish what interface for connecting equipped with a disk drive: IDE or SATA.

An adapter for a 2.5-inch drive of the required thickness and with the required connector for connection is purchased. Adapters with a SATA interface are much more common, so if a DVD drive has an IDE connector, it is sometimes easier to buy an IDE/SATA adapter than to look for the required adapter.

Installation in a laptop

Laptop designs are varied. For some models, to achieve the result, it is enough to unscrew a couple of screws on the cover of a small compartment, for others you have to remove back cover entirely, and sometimes the keyboard. However, the installation and connection sequence described in the proposed instructions is common for all laptops.

SSD instead of HDD

We will describe replacing HDD with SDD with interfaceSATA. It is usually carried out when a hard drive malfunctions or as one of the measures to increase operating speed.

Replacing a hard drive with an IDE interface will not be considered, due to the fact that it requires an individual approach for each model.

Procedure SSD connections disk to the laptop is as follows:

Installing M.2 SSD

Another way to increase volume internal memory and speed up the system - install a solid-state SSD M.2 drive. He being further development SSD technology, M.2 drive differs in smaller sizes and lower power consumption.

However, you should take into account the lack of the necessary connector for its installation on motherboards released before 2013. M.2 drives are produced several sizes. Before purchasing, you need to find out the right size by studying the technical specifications of the laptop, or by first disassembling it.

The following algorithm should be followed:

Installing an SSD instead of a DVD drive using an adapter

If you need to replace the laptop drive with HDD Using the adapter, you need to proceed according to the following scheme:

• screws are unscrewed back cover fastenings;
  
• back the cover is removable;
  
• Before removing the drive, unscrew it mounting screw;
  
• drive unit is extracted;
  
• the bar is unscrewed with hole for mounting screw;
  
• bar installed on adapter;
  
• SSD plugs into adapter;
  
• secured with screws from the adapter kit;
  
• adapter inserted into laptop instead of a disk drive;
  
• is fixed;
  
• is installed back cover.
  

Often, with such a replacement, a solid-state drive is installed in place of the HDD, which in turn is installed using an adapter instead of a DVD drive. This is done if, for example, the HDD interface is faster (SATA3) than the drive (SATA2), which provides the solid-state drive with even greater operating speed.

In the BIOS in the section disk device configurations you need to select the SATA port to which the solid-state drive is connected. You need to install in the menu AHCI mode, allowing you to fully realize its potential in terms of speed of information exchange.

Every year, users resort to using optical drives less and less. USB drives and services cloud storage Due to convenience and portability, data has almost completely replaced CD/DVD disks. Many users are unhappy that the drive in their laptop takes up space that could be used for something more useful. Fortunately, there is a way to do this. Indeed, instead of an unnecessary disk drive, you can install an additional SSD disk to which you can transfer operating system, and store all your files on a regular HDD. This approach is very practical and convenient. In this article we will take a closer look at how to install it instead of DVD in a laptop. Let's figure it out. Go!

Installing an SSD and HDD on a laptop is not as difficult as it seems

In online stores and regular stores that sell computer components, you can purchase a special Slim DVD adapter, which allows you to install a hard drive instead of optical drive. It works as follows. The HDD of your computer is inserted into the adapter, then the disk along with the adapter is mounted instead of the drive, and an SSD is installed in the place where the computer’s hard drive was previously installed. Agree, it sounds quite simple. In reality, everything is not so complicated either.

Let's get started. You need to start, of course, by purchasing a Slim DVD adapter. Adapters, like disk drives, come in two types: 12.7 mm and 9.5 mm. Depending on what kind of drive you have, buy the appropriate adapter, otherwise the hard drive simply cannot be placed in place of the optical drive. If you have already purchased it, then you can proceed to installation.

The first step is to remove the necessary components. This is not difficult to do, because you do not have to completely disassemble the laptop, but you will only remove some of its components. It’s worth noting right away that if your computer is under warranty, then such modifications will void the warranty. Despite the fact that this whole procedure is not very complicated, it should be taken with the utmost seriousness and responsibility. Therefore, if you are not confident in your own abilities, it is better to entrust this work to a master.

First, remove the battery, but if your laptop cannot be easily removed, then unplug it from motherboard, to avoid possible problems and problems. There is no need to remove the entire bottom. It is enough to unscrew a couple of screws to remove the HDD. It's the same story with the optical drive. You can easily find it on the Internet detailed information on disassembling each laptop model (since they are all different). See how to remove the floppy drive and hard drive from specific model laptop. After you have removed the appropriate covers, remove the HDD. To do this, you need to pull the special silicone tab. Since the HDD is mounted on special skids, they must be removed by unscrewing the corresponding screws.

Now you need to install the drive into the adapter. As a rule, everything needed for installation is included inside the box with the adapter, namely: a screwdriver, screws, a plug, a spacer and instructions. Please note that you need to remove the special fasteners located on the sides of the drive and screw them to the adapter. Install the HDD into the adapter and insert it into the SATA connector. Then install the spacer. The HDD itself still needs to be secured with a screw on the other side of the Slim DVD. To do this, you will need a thin screwdriver, which comes with the kit. Then remove the fastener from the other side of the optical drive and attach it to the adapter. Place a plug. All. Now you can insert the drive into place of the drive.

The next step is to mount the SSD. Attach to it the skids on which the HDD was once attached. Then insert the SSD in place of the hard drive, screwing it to the laptop using two screws.

Now all that remains is to screw back the covers covering the compartments for the drive and hard drive. Ready. Turn the computer over and turn it on. After downloading, you will see that an additional drive has appeared on your computer.

Now you know how to replace a laptop drive with an additional SSD drive. As you can see, it's quite simple. Write in the comments whether this article was useful to you and share your impressions and experiences with other users if you have already tried installing an additional drive instead of an optical drive.

It's no secret that today many laptop owners no longer use standard built-in DVD drives, since the popularity of optical disks is decreasing every year, and they are being replaced by compact and capacious USB drives. And so that the unnecessary drive does not take up space in the system, it can be replaced with an adapter for connecting an SSD or a regular HDD drive and measures 2.5 inches.

Instructions for installing an SSD drive instead of a DVD drive in a laptop

Before disassembling the laptop itself, you need to buy the HDD-DRIVE Caddy SATA-SATA adapter necessary for this operation, which is shaped like a regular built-in laptop DVD drive and has a special niche with SATA connectors for connecting an additional internal storage. Purchase this device at low prices It is possible on trading platforms such as Aliexpress, or in similar online stores.

You will also need free HDD 2.5-inch form factor disk for installation in a free bay.

After you have purchased everything you need, you can proceed:

Turn off your laptop, close the screen, turn it upside down and disconnect the battery;

Using a suitable screwdriver, remove the protective plastic cover to expose the drive (the principle is similar for almost all laptop models and manufacturers).

Unscrew all the drive mounting screws, and then carefully remove it from the case. This is usually easily done through its side mounting hole;

For reference. In some laptop models, the DVD drive is secured with one screw located under the keyboard. With this design, there is no need to remove the lower part of the housing to dismantle it. It is enough to remove the fixation of several latches, lift the keyboard, unscrew the screw and remove the DVD drive in the direction of opening the tray.

Then you need to install new SSD or HDD drive into the bay of the purchased adapter, and place the already assembled structure in the place of the previous drive. Don't forget to connect the power cable and screw back all the fixing screws;

Collect back laptop in reverse order, install the battery and try to turn on the system.

For reference. Installed disk may not be determined immediately. It may be necessary to format it through Disk Management Manager. To do this, go to the control panel, select “System and Security”, then click “Administration”, then “Computer Management”. The system will detect the new connected drive and click on it right click mouse, you can easily format it into the desired file system, and also give it a name that will be displayed in Windows Explorer.

That's all, we hope the article was useful and was able to explain to you how to properly connect an SSD/HDD drive instead of a DVD drive in a laptop.

Hello friends! We receive many letters on our website asking us to describe how to replace a DVD drive with additional HDD or solid state SSD drivein a laptop, which is what we will do in today’s article. For readers who do not quite understand what we are talking about, I will briefly explain.

Now in computer stores and andOnline supermarkets for computer and digital equipment sell special adapters. SlimDVD -> 2.5 at a price of 1200-1300 rubles.The laptop hard drive is installed into the adapter itself, then the adapter is inserted into the laptop instead of the optical drive, and in place Laptop HDD SSD solid state drive is installed. As a result, you have two hard drives in your laptop. You install the operating system on the SSD(more advanced users can simply transfer Windows from HDD to SSD), and use the laptop hard drive to store files. In my opinion, it is a very good idea to remove the drive and install an HDD instead, since if you ask you when you last used the drive, you won’t even remember.

HDD Toshiba laptop in a special adapter Espada SS95

All your questions on this topic:

1. Is it possible to replace a DVD-ROM (disk drive) with an additional SSD on your own, without resorting to a service, using a special adapter? Isn’t this too difficult?

2. Will an SSD drive installed instead of a drive be visible in the BIOS and is it possible to install an operating system on it?

3. Is it better to install a regular laptop HDD in this adapter, and install an SSD solid-state drive instead of the HDD? If yes, then how to move the operating room in this case? Windows system 7, 8.1 to SSD from a regular laptop HDD?

To install an SSD drive in a laptop instead of a disk drive, you don’t need to be a computer wizard, because you don’t have to disassemble the entire laptop, you just need to remove the disk drive and hard drive, but still to the point needs to be taken into accountin all seriousness, workcarefully and slowly.

Friends, this article is provided for your information and if your laptop is still under warranty, then after such a replacement you will naturally lose this warranty. If you are not confident in yourself, make such a replacement in the service, but still read the article first to decide what exactly you will install in such an adapter - a regular laptop HDD or an SSD, I recommend HDD, and install the SSD in the standard location of the hard drive laptop.

Get ready for the fact that in most cases not everything will go smoothly (I deliberately chose a difficult example so that you know some of the pitfalls), since such DVD -> HDD adapters are not officially made by any laptop manufacturing company, but despite this, a large Some of these Chinese devices work great.

• Note: First of all, remove the battery from the laptop; if it is impossible to remove it, then be sure to disconnect it from the motherboard; this should always be done when disassembling the laptop. By doing this you will insure yourself and your laptop from possible troubles. When working, do not touch the components located on the laptop motherboard with your hands or a screwdriver.

Select and buy an adapter for installing an HDD instead of a disk drive on a laptop

One of my friends bought this Espada SS95 9.5 mm adapter, SATA interface for 1200 rubles

and asked me to replace the DVD-ROM with an HDD, but did not take into account the fact that there are two types of drives in laptops: a regular drive 12.7 mm high and an ultra thin drive from 9.5 mm. My friend’s laptop is not new and has a 12.7 mm drive, but despite this, the 9.5 mm adapter was still installed and sits firmly in its place.

Still, I advise you to buy an adapter the size of your drive and there will be fewer problems with installation.

When choosing an adapter for installing an HDD instead of a disk drive on a laptop, keep in mind that some adapters come with special “ears” and such an adapter can be easily removed back.

Removing the laptop drive

Friends, articles have already been written and are almost ready on how to make such a replacement on HP, Toshiba, ASUS laptops, and we will start with SONY.

Turn off our laptop and turn it upside down.

Disconnecting the battery

If accumulator battery not removable, which means you must disconnect the battery connector from the motherboard!

Disconnecting the DVD-ROM

Don't rush to disassemble your entire laptop! To disconnect the disk drive on a laptop, you usually do not need to remove the bottom cover of the laptop or, even worse, disassemble the entire laptop, but only need to unscrew two screws. If you have never done this, type in a search engine the request - How to remove a disk drive from (hereinafter referred to as your laptop model).

Disconnecting the laptop hard drive

In the case of a SONY laptop there are no problems at all, we unscrew two screws and remove the cover and here is our hard drive. Unscrew two more screws

And carefully pull the silicone tab, the HDD is removed from its place.

Installing a laptop hard drive into the Espada SS95 adapter

In my opinion, we need to install a laptop hard drive in this adapter, and in the rightful place of the HDD we will install an SSD solid-state drive, onto which we will install or transfer the operating system. This needs to be done because SATA port floppy drive (up to 1.5 Gb/s) is often slower than the SATA port (6 Gb/s) of the hard drive.

Windows on an SSD will run much faster than it would on a regular HDD. Almost all laptop HDDs have a 2.5 form factor, just like SSDs, so an SSD will fit perfectly in place of the HDD.

The laptop hard drive is located in special “slides” and is attached to them with four screws; unscrew them and release the HDD.

P adapter Espada SS95

Now, friends, the time has come for our adapter. We have it in this box,

In addition to the adapter itself, the plastic packaging contains a small screwdriver, a bag of screws, a plastic blanking panel and a spacer.

We take out the adapter

First, you need to remove the special fasteners from the drive and attach them to our adapter.

Note. The optical drive is located on top, and our adapter is located on the bottom. This mount on the drive must be removed and attached with the same two screws to the adapter. Using this mount, the adapter will be attached to the laptop body.

We install the laptop hard drive into the adapter and carefully insert it into the SATA connector.

Then we install the “spacer” into the adapter.

The hard drive in the adapter is secured not only with the help of a spacer. Turn the adapter over and tighten the screw securing the hard drive in the adapter.

On the other side of the adapter there is also a screw, only it is somewhat “recessed” in its place; we screw it in using a thin screwdriver.

Now remove another mount from the drive

and attach it to the adapter.

We put a plug on the adapter

We install the adapter in the laptop in place of the drive.

We attach the sleds remaining from the laptop hard drive to the solid-state drive

and install the SSD in place of the HDD and secure it to the laptop case with two screws.

Close the hard drive bay with a cover and secure it with screws. We also attach the adapter to the laptop body with two screws. We put the battery in place.

Side view of our laptop.

Installing Windows 8.1 on SSD

We enter the BIOS and see only one 120 GB SSD solid state drive; a regular laptop HDD connected via an adapter is not seen by the BIOS. This sometimes happens on various laptops, but nevertheless, if you install an operating system on the SSD, then the space of the HDD connected via the adapter will be available.

Program Windows installations 8.1 still sees both drives: Disk 0 (SSD) and Disk 1 (HDD).

We install the Windows 8.1 operating system on the SSD.

We go to Disk Management and see our SSD solid state drive (120 GB capacity) with installed Windows 8.1 and a regular HDD (capacity 320 GB) with Windows 7 installed.

What happens if you leave one adapter in your laptop without an SSD?

You see for yourself, there are no defined models in the BIOS hard drives,

Conclusion:

Let’s say you are happy with everything in your laptop, then you definitely shouldn’t indulge in such experiments, another thing is, if you are an enthusiast and want to get the most out of your laptop, then definitely, our article is for you!

Why do you need to install a hard drive instead of a disk drive in a laptop? Increasingly, a solid-state drive is being used as the main storage device. SSD installation into the laptop makes booting and system operation faster. However, such devices, as a rule, have modest volumes - storing hundreds of gigabytes of films, games and other important information there's nowhere left.

With a desktop computer everything is simple - you can install at least a few additional drives. There is no free space in the laptop. However, it is entirely possible to remove the disk drive, which is becoming increasingly useless, and install an SSD or HDD () in the laptop instead of a DVD drive. It is not possible to connect the hard drive directly - in laptops, disk drives and storage devices use different connectors. Adapters from DVD to HDD-SATA come to the rescue (You can also find adapters to HDD-IDE, but they are only suitable for old laptops).

Now let's figure out how to put second hard disk in a laptop using an adapter?

It makes no difference what type of disk is installed in the optical drive bay of a laptop - both HDD instead of DVD and SSD will connect the same way. It should be taken into account that computer manufacturers do not provide for such a modification - there are no official adapters, only Chinese models (for example, Optibay). However, due to very simple device There is no need to worry about the quality of the adapter. But the user takes full responsibility for possible problems - he will lose the warranty on the laptop.

Before connecting an additional SSD to a laptop or installing an HDD in the drive bay laptop dvd, you need to ensure safety: disconnect the battery, and also ground yourself - touch, for example, the battery to remove static voltage from your hands, which can destroy the components of the computer motherboard.

Adapter selection

Many manufacturers produce HDD sleds for laptops. There is no significant difference between them - you just need to choose a suitable HDD adapter. A laptop can have one of two types of drives installed:

• 12.7 mm high - in older models;
• 9.5 mm - in modern ultra-thin computers.

It's okay if the thin adapter is used for a laptop with a high bay - installation will go without problems. But it is better to choose a suitable adapter so that replacing the CD drive with an SSD in a laptop does not cause difficulties. In addition, it is worth buying sleds with special brackets, with which they cling to the outer part of the computer case; it will be easier to remove the device if necessary.

Disabling the drive and HDD

Creating a laptop with two hard drives is possible in any case, the only differences will be in how the computer case is disassembled. Models from different manufacturers may have their own characteristics, but the general procedure is as follows:

1. The battery is disconnected. If it is non-removable, the battery connector is disconnected from the motherboard.
2. On the bottom surface of the case, the screws holding the drive are unscrewed.
3. The DVD drive is removed.
4. The cover covering the main parts of the laptop is removed. If there is a separate compartment for the drive, as in Sony computers, there is no need to completely disassemble the case.
5. The HDD is removed from the device.

If you are installing second hard disk into a laptop without replacing the old HDD, there is no need to disconnect it.

Unlike a desktop computer, wires and plugs do not need to be disconnected by hand. They are firmly fixed and will turn off themselves when the devices are removed, so no problems should arise.

Connecting the hard drive to the adapter

1. A solid-state drive is installed in place of the old HDD, and the removed hard drive is connected to the adapter;
2. Both bays accommodate SSD drives;
3. Using a slide, the drive is replaced with an SSD or any other hard drive, the old drive remains in its place.

In any case, you need to install the operating system on a faster drive - either an SSD instead of a DVD, or a disk installed in the main location. This is due to the fact that SATA cable, designed for a DVD drive, is 4 times slower than the cable connecting the drive to motherboard. Therefore, with an HDD installed instead of a drive, the system will boot much longer and, in general, the laptop will work slower. The performance of the SSD somewhat compensates for this difference.

Replacing a DVD with a hard drive is as follows:

1. The disk is detached from the original slide, to which it is screwed with 4 screws;
2. The hard drive is inserted into the Optibay adapter and connected to the connectors. On the opposite side, a plastic spacer is inserted, which comes complete with the adapter;
3. Screws are screwed into the underside of the slide to hold the drive in place;
4. The fasteners are removed from the original drive and screwed to the adapter;
5. A plug is placed on the outside of the adapter;
6. The device is inserted into the laptop drive bay;
7. After this, all that remains is to insert the SSD into the slide from the old hard drive, tighten their screws and install the device in its place. Next, the computer case is assembled in reverse order.

Problems with the laptop detecting the second drive

In some cases, the BIOS does not recognize the second hard drive. It's not a problem. This is due to the features of the BIOS itself. The system will boot as normal. If you have installed an SSD instead of a disk drive and want to install the system on it, the program will normally detect the disk.

If the existing OS does not see the second disk, the reason may be that it is not formatted. If you go to system utility"Disk Management", the new hard drive will be detected. You need to format it in file system NTFS and it will appear in Explorer.

Thus, even an inexperienced user can replace a DVD drive with an SSD, since installing a second hard drive on a laptop is very simple. The main thing is to choose the right adapter and not lose the screws when disassembling and reassembling the computer. Below, you can watch a video on installing a hard drive instead of a DVD drive in a laptop and MacBook.