Using Wi-Fi in Nokia smartphones. Connecting Wi-Fi on phones and smartphones Programs for all phones

What we haven’t already connected to Wi-Fi, but I haven’t yet written about how to do this on Windows Phone 8. Perhaps this article may not seem necessary to some, due to the fact that the process of connecting Windows Phone 8 phones to wireless networks is very simple and straightforward. I agree with this, but it’s also not difficult to connect, and the instructions became very popular and received a lot of comments.

This means that users have difficulty connecting to Wi-Fi. That’s why I’ll now tell you how to do this on a phone that runs Windows Phone 8. I’ll show it using the Nokia Lumia 925 as an example. (it's not really important).

When you first start Windows Phone 8, the basic settings manager appears, during which we are asked to connect the phone to the Internet via Wi-Fi. There you only need to select a network and specify a password for it. If you did not do this during the first setup, or want to connect to another network, for example at home, then this can be done through the settings. As I wrote above, everything is very simple.

While on the main screen (where the tiles are), slide your finger across the screen to the left, and select the item in the menu Settings. In the settings, select the item WiFi.

Make sure the Wi-Fi network is turned on. If it's off, turn it on. Below, a list of wireless networks available for connection should appear. Click on the network you want to connect to.

Enter your wireless network password and click on the “done” button. If you have forgotten your network password, then see the article. If the network is unsecured and the phone refuses to connect, or connects but the Internet does not work, then go to.

If all is well, the phone will connect to Wi-Fi. Near your network there will be a status “ connection established“.

That's it, our phone is connected to Wi-Fi. You can go to your favorite sites, install programs, etc. :)

How can I disconnect from the network or change connection settings?

To view the parameters of the network you are connected to, simply click on it. A new window will open in which you will see the connection IP address, mask, gateway and DNS, and MAC address. They cannot be changed. Be sure to check it out to “ Proxy server" was switched off. Otherwise, there may be problems that there will be a connection to the network, but the Internet will not work, or some sites will not open, or there will be no Internet access in programs.

To remove a Wi-Fi network (Windows Phone 8 will no longer connect to it automatically), just click on the “ Delete“.

To reconnect to this network, you will need to specify the password again.

It's strange, but I didn't find any way to manually set a static IP address or DNS. Most likely, there is no such possibility. Hopefully this will be fixed in Windows Phone 8.1.

That's all the settings. In the near future, I plan to prepare an article about possible problems with connecting Windows Phone 8 devices to Wi-Fi. Therefore, if you encounter any problems during the connection or work process, write about them in the comments. I will be grateful.

Also, after the official release of Windows Phone 8.1, I will update the article. They promise some changes in working with wireless networks.

Also on the site:

Connecting to a Wi-Fi network on a phone with Windows Phone 8. Using the Nokia Lumia 925 as an example updated: April 30, 2014 by: admin

The network of hot spots is conquering megacities at an even faster pace. The world is currently interested in Wi-Fi-based services from the point of view of making money in various urban areas, such as computer clubs, restaurants, airports, libraries, shopping centers. Access to this type of measure is paid and without koshtovny, vіdmіnnіst between them there is a lot of service and a lot of money between them. At this glance, you recognize a lot of redness, and how to connect wifi to Nokia.

For additional technology such as Wi-Fi, you can:

While playing in a group, for example, you gather not one, but more igors.
Deny access to the computer's system.
Connect to Windows, Linux.
Connect to the Internet.
Enchant the files.
Watch video and music files.

Yak nalashtuvati wifi on nokia

There are two WLAN connections:

At an open access point (hotspot).
At home or at work.

The network has its own name. It is correctly called the SSID. If you have access, in other words, an Access Point device (then called an AP), which sends a signal to the device 10 times per second about the network. A device that can receive this Information, in principle, can be connected (about security further).

It’s not at all important to get to a public hotspot for your Nokia help. Hurry up as soon as we get it, so with the additional program. In order to verify that you have Wi-Fi, the dispatcher will indicate that in the “Available WLAN” section any limits are shown, and the protected points are shown with icons with a padlock.

In general, everything is not so complicated: the phone detects the AP signal, then you see on the screen, as the network is called, having made a choice, then you can navigate the Internet, behind your head, if the AP administrator does not mess up the configurations.

If the hotspot is paid, then when you try to log in you will be prompted to enter a password that you will need to obtain from your Internet provider. Naturally, if you do not enter it, there will be no connection to the Internet.

With a Nokia phone there are three ways to keep track:

Connectable in WLAN settings. With such settings enabled, the symbol will be displayed, which will be located next to the square. Sometimes, learn how I will measure and how I will name it, perhaps using a different method.
We go to the menu and go to the connection manager, where the WLAN input is located. There you will see the level, signal strength, protection, and speed.
When you enter a gap, you are asked about the access point. In the menu there is Search for WLAN networks; after selecting, you can access the list of networks.

If I want to do this frequently and search for it and enter security keys, it’s not possible. The WLAN network is supplied to the primary access point.

I look at how the border is bezdrotov, in which case radiokhvili are victorious. Various devices that operate in different ranges allow a range of 11 channels. These channels defined by the AP robot can be changed. The selected channels do not merge into the border, everything is created automatically. Є two respects:

Measurements that exist on the current channel sometimes introduce disturbances.
Different devices show different sensitivity, which indicates the robot's versatility. As a rule, when you try to receive a signal, set it up to work on the sixth channel, or the middle one. That's why, on the first and eleventh, the work of the borders is even tighter.

To easily and quickly turn on and off WiFi, you can download the ConnectivityShortcuts program from the market.

The Wifi program switches to wireless and Bluetooth mode.

We hope that we helped you set up wifi on your Nokia phone.

Welcome to the drone-free Internet!

IMPORTANT! Before setting up your phone, first check whether you are within range of a particular wireless Wi-Fi connection. You can use home Wi-Fi, or you can connect your iPhone to free networks, for example, in cafes or shopping centers.

So let's begin:

Go to the home screen and go to the “Settings” menu.
Then a search for available Wi-Fi will automatically start.
Choose a name and connect.

This method is suitable for connecting to unprotected routers, for example, in public places.

If you are connecting to a secure Wi-Fi, the sequence will be slightly different:

Open the “Settings” menu.
We look for the line “Wi-Fi” and enable the option.
After automatically searching for Wi-Fi, select the desired access point.
Enter the password and click “Connect”.

If you cannot connect your phone to Wi-Fi this way, it means you are entering the wrong password. To find out the correct one, contact your Wi-Fi administrator.

DO NOT FORGET! To connect your phone to secure Wi-Fi, you need to know the password; a “lock” icon is displayed next to such connections.

There are also situations when you need to connect your phone to a hidden access point that is not displayed in the general list. To connect your smartphone, you need to know the exact name of Wi-Fi:

Open the “Settings” menu.
We look for the line “Wi-Fi” and enable the option.
Click “Other” and enter the exact name.
Click "Security".
After this, you need to select the type of protection, as shown in the illustration below.

We return to the “Other network” item and enter the password.
Click “Connect”.

The most common problems when trying to connect an iOS phone to Wi-Fi

It often happens that you seem to have done it correctly and followed the instructions, but nevertheless you cannot connect your phone with the iOS operating system to Wi-Fi. Don’t despair and think that the saying “Technology in the hands of a monkey is a piece of iron” is about you. Most likely, this is not due to some technical glitch.

If you cannot connect your phone to Wi-Fi, do the following:

Check your router connection. Also make sure you are in range.
Check that the Wi-Fi option is turned on on your smartphone. Go to “Settings”, then to “Wi-Fi”. If there is a blue check mark next to the desired name, this means that the connection on the phone is successful and problems are observed in the router.
If you want to connect your phone to Wi-Fi at home, check that the cables are connected correctly and that the router is configured correctly.
Reboot your IOS phone and set it up again.
Reboot your router and also configure it again.

If all else fails, try the following:

If you are trying to connect a smartphone in a public place, contact an employee of the establishment and ask him to set up Wi-Fi.
Check the connection on other devices, such as a laptop, or ask others if the Internet works for them. If there is also no connection on other devices, then there is a problem with the Internet provider. Contact your Internet provider.
Try connecting in a different location or to a different Wi-Fi. If attempts are unsuccessful, contact a service center to have your iPhone checked.
Update the router firmware version and check that your smartphone is in the list of supported devices.

How to connect Android to Wi-Fi

Many people think that setting up an iPhone is really not an easy task. Few people will argue with this statement. But when it comes to Android, many people think that these are easy-to-use smartphones that even a child can figure out. However, in fact, when trying to set up Wi-Fi, some difficulties may arise here.

In general, the popularity of Android is growing every day. Probably, there is no longer a person who does not have a smartphone or tablet with the Android operating system in his arsenal of home equipment. Even the smallest children today actively use these gadgets instead of the usual toys, dolls, cars, etc. But few people know how to properly configure Wi-Fi.

You just need to connect your smartphone once and in the future the smartphone will independently connect to Wi-Fi. But it’s not uncommon to see situations where you need to configure Android manually.

For a visual illustration, we will use an LG G4 smartphone with Android 5.1 operating system. However, the model does not matter, Android smartphones are almost the same.

Before you start setting up Android, you need to install Wi-Fi by turning on the adapter. The adapter can be turned on in two ways:

Via the toolbar.
Through device settings.

The first method is very convenient: we slide our finger across the screen (from top to bottom) and see the toolbar, as in the figure:

We are looking for the Wi-Fi button with the corresponding icon. Click on it and thus activate the Wi-Fi model.

After this, the system starts searching for available wireless networks and the following list appears on the screen:

Select the one you need and connect. If it is password protected, enter the combination of characters and click “Connect”. The whole process is automated and will not take much time.

Another question is if the connection is hidden in the router settings or the DHCP function is disabled. Then you need to configure Android manually.

How to set up Wi-Fi on Android manually if the connection to the router is hidden

Just like the first method, we first need to enable the adapter. But the methods listed above are not suitable for us. We change the strategy: first go to “Settings”. But then we act depending on the version of the phone. Find the “Wi-Fi” item and open its menu. Turn on the adapter. If you have an earlier model, then find the “Wireless Networks” item and select “Wi-Fi Settings”. Move the adapter to the on position.

Next, we move on to manually searching for available connections: you will be offered a list of access points that were found automatically. If you are connecting to a hidden network, click “Add Wi-Fi”:

Enter the exact name of the hidden access point (SSID) and proceed to security, as in the illustration below.

Typically, a Wi-Fi connection provides faster speeds and is cheaper to use compared to mobile data. If a Wi-Fi connection and mobile data are available at the same time, your phone uses the Wi-Fi connection.

Turning on Wi-Fi

Tap Settings > Wi-Fi.
Switch the Wi-Fi switch to On.
Select the connection you want to use.

A Wi-Fi connection is active when the icon appears in the status bar at the top of the screen. network_wifi. 1

Advice. If you want to track your location when there are no satellite signals, such as inside buildings or between tall buildings, turn on Wi-Fi. This will improve location accuracy.

1 Note. Wi-Fi network usage may be limited in some countries. For example, a Wi-Fi network of certain bands can only be used indoors (in the US and Canada this range is 5.15–5.25 GHz, in the EU - 5150–5350 MHz). For more information, contact your local authorities.

Important! To increase the security of your Wi-Fi connection, use an encrypted connection. Encryption reduces the risk of unauthorized access to your data.

The network of hot spots is conquering megacities at a very rapid pace. In the modern world, interest in Wi-Fi-based services from the point of view of earning money is presented in various public places, such as computer clubs, restaurants, airports, libraries, and shopping centers. Access to this kind of networks can be paid or free, the difference between them is in the quality of services and connection speed. In this review you will learn a lot of useful things, namely how to connect wifi to nokia.

With the help of technology such as Wi-Fi it is possible to:

When playing a game, connect, for example, not one, but more games.
Gain access to the computer system.
Connect to Windows, Linux.
Connect to the Internet.
Download files.
View videos and music files.

How to set up wifi on nokia

There are two WLAN connections:

In an open access point (hotspot).
At home or at work.

Each network has its own name. Correctly it is called SSID. If you have access, in other words, an Access Point device (later called AP), which sends a network signal to devices every 10 times per second. A device that can receive such information has, in principle, connectivity (more on security later).

Joining a public hotspot using Nokia is not at all difficult. Use both built-in and additional software. In order to check whether you have Wi-Fi, a connection manager is suitable, in the “Available WLANs” item which shows the found networks, and protected points are shown with icons with a lock.

In general, everything is not so complicated: the phone picked up the AP signal, then displayed on the screen the name of the network, having made a choice, then you can use the Internet, provided that the AP administrator has not made any confusion in the configurations.

If the hotspot is paid, then when you try to join you will be asked to enter a password, which you need to find out from the owner of the Internet. Naturally, if you do not enter it, there will be no connection to the Internet.

With a Nokia phone there are three ways to see the network:

We connect in the WLAN settings. When connecting the settings in this way, a symbol will be displayed with four squares. Sometimes, it is possible to see which network and what its name is with the second method.
We go to the menu and look for the connection manager, where the WLAN input is located. There you will see what network, signal strength, protection, speed.
When we log into the network, we are asked about using an access point. In the menu there is Search for a WLAN network; after making a selection, we get access to the list of networks.

When the network is in frequent use, it is not worth searching for it and entering security keys. We add a WLAN network in the form of a regular access point.

Given that the network is wireless, radio waves are used in this case. A range of 11 channels allows different devices operating nearby on different networks. These channels, where the AP does its work, can be changed. The channels used do not affect the network, everything happens automatically. There are two notes:

Networks that are on an adjacent channel sometimes cause interference.
Different devices have different sensitivity, which is determined by the quality of work. As a rule, devices receiving a signal are configured to operate on the sixth channel, that is, the middle one. Because of this, on the first and eleventh the quality of the network is somewhat worse.

To easily and quickly turn WiFi on and off, we advise you to download the ConnectivityShortcuts program from the market.

In addition to Wifi, this program switches to airplane mode and Bluetooth.

We hope that we helped you set up wifi on your nokia phone.

Enjoy using the wireless Internet!