The phone got wet, the sensor doesn’t work, what should I do? What to do if moisture gets into your phone? What to do if your phone falls into water

To begin with, you can immediately answer the question most frequently asked question which torments!

How much does it cost to repair a wet phone?

We will answer immediately. From 800 rubles! The master will determine more precisely. But as a rule, repairs are much cheaper than buying a new phone.
And one more subtle question

Does it make sense to repair a drowned smartphone?

Of course yes! As we said, it's much cheaper.
Think for yourself...
Cost of a new mid-range phone
10-15 thousand rubles

Repair of drowned man price

average 800-2000 rubles
Does it make sense to buy when your refurbished mobile phone will work like a new one? In this case, you will not need to restore contacts!

So about the cellular “diver-diver”...

This article prompted me to write a large number of calls with the questions “My phone fell into the water, what should I do, how much will it cost to repair a sunken phone?”, or “My phone got wet, it worked right away, then stopped turning on,” or “We washed my phone in washing machine, the phone does not turn on, can it be repaired? etc.

First, I’ll tell you what to do first if liquid gets into your phone:

1. The first step is to remove the battery from the phone and do not insert it for at least a day. Oddly enough, it’s not just water that kills the elements inside the phone, but electricity, which oxidizes the elements inside and disables the radioelements and the device board.
2. Second thing the phone needs to dry inside. But based on practice, I will tell you that liquid gets inside the phone very quickly, but it can dry for a very long time, not just one day. And even if all the liquid dries inside, there are still salts dissolved in the water, which corrode the radio elements when the phone is operating, since salts are conductors of electric current.
3. Therefore, I recommend the third step in saving your phone after moisture gets into it: contactservice center repairing phones, and it’s better not to hesitate, the sooner you do it, the cheaper the repair will cost, and perhaps only preventive maintenance of phone elements will be enough.

But it's not always so easy. Let's say they dropped it in water iPhone, but the battery in it is not so easy to get out without disassembling the device. In this case, if you cannot contact the service center as soon as possible, I advise put iPhone in rice(just don’t laugh, but it really helps! the most ordinary food rice, at first I didn’t believe it, but after people brought in sunken iPhones dried in rice, during repairs it was really clear that the effects of moisture were minimal). The photo shows the board of a recessed iPhone 4, which was placed in rice and then brought to the service center. The board was perfectly clean, the only thing oxidized was the connector touch screen(marked with a red circle). The red diamond shows an indicator that liquid has entered the iPhone.

And now I want to answer the most common question: “How much will it cost to repair a recessed phone?” If the phone does not turn on after liquid gets inside, then I will answer honestly: “I don’t know.” In this case, it is impossible to do without diagnosing the malfunction, since water could damage any element, and therefore the phone must be disassembled and tested to identify the malfunction.

The most harmless case is when the phone is dropped into water, it continues to work, but there are water stains on the screen. It doesn’t seem to be a big deal, but it looks unpleasant, especially against a light background. The only way out of this situation is to replace the display on your phone. Even after the water has dried, traces of it still remain, and it is impossible to remove them from the old screen, since the display contains several layers of film that diffuse the backlight, and it is unrealistic to disassemble them without damaging them.

The worst case is when water that gets into the phone oxidizes the radio elements and disables them. The degree of oxidation depends on the time the phone was in the water, on the amount of liquid that got inside, on whether the battery was immediately pulled out of the submerged phone or after some time. If you don’t immediately take action after liquid gets into your phone, then it will end up with approximately the same thing as the phone in the photo. The elements oxidize, the salts corrode the phone parts, and the recessed phone becomes unusable for repair.

The last picture shows the board of a phone that fell into the water and the battery was not immediately removed from it. The phone worked for a while, then turned off and never came back on. Yes, it won’t turn on anymore, the phone cannot be repaired, since many of the radio elements inside have simply rotted. In this case, it is necessary to completely change the circuit board on the phone, which is usually comparable in cost to the price of a used phone of the same model.

Therefore, to avoid this and extend the life of your phone after liquid gets into it, immediately take the measures that I wrote about at the beginning of the article.

By carelessness, a phone that has fallen out of your hands and ended up in water can be saved from imminent death at home. The main thing is to act quickly, then you will be able to save on buying a new gadget. You can dry your phone from water using improvised objects and unusual means: napkins, a vacuum cleaner, rice, cat litter and silica gel. You can also take the device to a service center to solve the problem.

After the phone is in the water, every second can be decisive in saving the gadget. Because even a drop of liquid that gets inside the device can cause a short circuit.

Step-by-step instructions will help you quickly take the necessary measures:

1. 1. You must immediately remove the phone from the water and turn it off. If the gadget was already turned off or was in “sleep” mode at the time of the fall, turning it on is strictly prohibited. You can check the device for functionality in no less than a day. Otherwise, a short circuit may occur, after which it will no longer be possible to revive the device at home.
2. 2. Now you should remove all foreign objects from the phone: case, protective film, SIM card, remove the headphones (if they were in the device connector at the time of the fall). The gadget should be kept level, in a horizontal position, without shaking it. Attempts to pour water out of the speakers and connectors by shaking only result in the liquid penetrating even deeper into the device.
3. 3. After turning off the device, you need to disassemble it as much as possible: remove back cover, remove the battery, even remove the buttons (if the model is old). In this case, special care should be taken not to damage the internal device or touch the contacts. During disassembly, you need to try to remember where each part is located and what it is attached to, so that after all the manipulations you can correctly assemble the gadget yourself.
4. 4. All parts should be wiped dry with a napkin, paper towel, rags, rag - whatever is at hand. The main rule is that there should be no lint on any of the above items. After this, all metal contacts, cables, motherboard It is recommended to treat with alcohol. This will allow the moisture to evaporate faster and prevent further corrosion. Device with non-removable battery should be wiped very carefully with a dry, clean cloth in the areas where the connectors and other openings are located. You can twist paper strands and gently blot hard-to-reach areas. It is not recommended to wrap paper around sharp objects, such as the tip of a pen or pencil, as this is unsafe for small parts and is not beneficial.
5. 5. After all manipulations, the device must be left to dry naturally. This will take 24-48 hours. If possible, it is recommended to wait as long as possible. You cannot turn on the phone before the specified time in order to check its functionality, because even if the device is dry on top, the parts and contacts inside remain wet.

If your iPhone falls into water, after providing first aid, you should take it to a service center. This rule applies to all touch phones that cannot be disassembled. If you simply dry the device without treating the internal parts, there is a high risk that after some time it will fail. Water contains salts and minerals, which dry out and leave behind particles. They must be removed from the microcircuits to avoid further damage and corrosion.

Disassembling the device at home is very problematic, since it will require special tools: Phillips screwdriver, plastic spatula, vacuum suction cup for detaching the screen. Even if the necessary devices are at hand, there is a high risk of damaging an expensive device without the appropriate skills. Only specialists at the service center will be able to disassemble the device down to the last screw, assess the extent of damage and take the necessary measures.

How to dry your phone correctly?

Improvised objects and rather unusual means will help to effectively remove liquid:

• silica gel;
• cat litter;
• vacuum cleaner.

Vacuum cleaner

This is the easiest drying method, but it requires compliance with safety rules. Before the procedure, you need to make sure that the phone is not wet. It is strictly prohibited to suck up drops of water from the device with a vacuum cleaner to avoid electric shock. It is recommended to put a narrow nozzle on the hose and carefully treat the phone from all sides. You should not bring the hose too close to the device, as static electricity can damage the gadget.

It is strictly forbidden to dry your phone with a hairdryer, since the air directed at the device blows out the water droplets even more. inside. For the same reason, you cannot use a fan.

Rice or cat litter

Drying your phone with rice

Rice is effective improvised means, which quickly absorbs moisture. For the procedure you will need a plastic container. It is necessary to fill it with cereal and immerse the phone and its parts in the container so that the rice completely covers the device. After this, the container with the phone must be tightly closed with a lid so that air does not penetrate there, and left for a day.

If you don't have rice, you can use granular cat litter. It absorbs moisture well, so the effect of the procedure will be similar to using rice.

Silica gel

Drying your phone with silica gel

Silicone bead bags are designed to absorb moisture. They are usually placed in shoe boxes. The product is easily recognized by the inscription “Silica Gel. Don't eat." Finding a lot of silica gel at home is not easy, but if you are lucky enough to find the right amount, then it is recommended to use it this method. The fact is that, unlike cereal or filler, bags do not leave small particles on the phone and absorb water much faster.

You need to take a bag with a sealed zipper, put the gadget with parts (battery, lid) in it, fill it with gel bags, close tightly and leave for a day.

Check connection

If the device does not work when turned on after complete drying, do not despair. A faulty battery may be to blame. Its performance can be checked on another device and, if necessary, replaced with a new one.

Another potential reason why your phone won't turn on is a low battery. You need to put the device on charge and when you turn it on, listen carefully to the operation of the device. Extraneous noise and sounds may indicate that the device is not functioning properly.

A sensor will help determine whether water has entered the device. On touch phones there is a light circle or square near the battery. If it is white, it means that the liquid did not touch important parts, and if it is pink, then the water managed to affect the main elements.

When the phone works, but intermittently, it is recommended to take it to a service center or disassemble it yourself. Darkening on microcircuits or white plaque can be removed with a toothbrush. Brownish marks should be wiped with alcohol to prevent further corrosion.

A special kit for resuscitating wet gadgets, which can be found on the shelves of specialized stores, will help you quickly save your phone after falling into water.

If you are unable to resolve the problem yourself, it is recommended to contact a service center. It is quite possible that the breakdown is not so serious and for the correct functioning of the gadget one of the parts will need to be replaced. This will help you save money without buying new phone, and save important information, left in the old device.

Inattention, absent-mindedness, forgetfulness, or simply a random coincidence of circumstances very often confront us with the task of how to dry a phone that has fallen into water. And this can happen not only while relaxing on a pond, but also in your own apartment. Modern phones accompany us everywhere. On the one hand it is convenient. On the other hand, they threaten the device, without which the majority can no longer live, with unexpected problems. And one of the most common problems is getting the phone wet.

Imagine that your phone is charging, that is, connected to electrical network, and it is at this moment that a mug of tea, coffee or any other drink is accidentally poured onto him. The first, almost instinctive movement will be to grab the phone and wipe all the moisture off it. This should not be done under any circumstances. You could simply get electrocuted.

If immediately after the incident the traffic jams did not go out and the lights did not go out in the apartment, this does not mean that the danger, especially for you, has passed. The first step is to unplug the charger from the network, or turn off the electricity altogether, and only then take any action to save the phone itself.

The phone fell into the water: algorithm of actions

There is a strong opinion, which is actively supported by manufacturers, that if your device falls into water or a sufficient amount of liquid is poured on it, this at least means that you will have to go to a store that sells spare parts for cell phones, or even buy a new one, but this is not entirely true. If you act quickly, confidently and logically, you can often save your phone.

• The main rule is as follows: than faster phone removed from the water, the greater the chance that it will continue to function. There is no time for disgust or fear of getting your expensive manicure wet. No matter what tank you have to take out your phone or hands from, you can always wash them with soap later, which is much cheaper.
• If this trouble occurred while the phone was turned on, you need to turn it off in any way. The button does not work, which means you need to remove the battery. You can’t delay with this either, and it’s certainly not recommended to test it for performance. By trying to press any button other than turning it off, you risk completely killing the phone.
• Then, you should arm yourself with the necessary tools, sit in a comfortable, well-lit place and disassemble the phone. It's not easy to remove the back cover, take out the battery and SIM card. You need to try to remove everything that is possible and at the same time not forget in what order it was all done, so that you can put it back together later. If you have touchscreen phone fell into the water and the question arose of how to dry it, there is no point in getting lost. It can also be disassembled, but this will require a very small screwdriver and maximum attention and accuracy.
• After you have been able to unscrew and remove everything that is possible and have laid it out on a clean and dry towel, each part should be blotted with paper napkins and with them, twisted into flagella, try to get into the most inaccessible places. There is one caveat here. You should not wrap a napkin around a match or toothpick. In this case, the flagellum will become too hard, and the possibility of applying mechanical damage fragile parts will increase several times.
• You cannot immediately collect the field for this operation, much less turn on the phone. No matter how much it may seem to you that there is not a single molecule of liquid left inside the device and on the removed parts, this is not so. The phone should be left disassembled for several days and only then try it in use.

Degree of wetness

Agree that this indicator is quite important and, it turns out, many phones and smartphones provide the ability to determine this purely visually. If you remove the battery, you will see a small white circle or square near the charging hole.

This is an indicator showing the very degree of wetness. If it turns from white to pink or even red, then the phone that fell into the water should be dried.

Hair dryer or vacuum cleaner

Another deeply erroneous opinion is that in order to speed up the drying process, you can use a hair dryer to dry your hair. A strong air flow, on the contrary, will drive moisture into places where it will simply be impossible to dry it. And if you also turn on the hair dryer to heat, this may lead to overheating of some parts.

A vacuum cleaner is much safer in this case. On the contrary, it works on suction and therefore draws out moisture. This is not to say that this is an ideal and highly effective method, but it certainly won’t do any harm. So before you do anything, you should think carefully about how to dry mobile phone, fallen into the water, and do it correctly, without causing more damage.

Proper drying

Let us remind you once again: in order to dry your phone so that it continues to work, you should never rush. Neither paper napkins nor a vacuum cleaner will ensure a complete absence of moisture - they will only significantly reduce its amount. But even a small drop can be enough for the phone to burn out if turned on at the wrong time. Several days in the air are simply necessary, but this process can be accelerated by placing the device in an adsorbing medium.

The easiest way to create it at home is in three ways:

• Regular rice. Any grain absorbs moisture very well, but rice is the cleanest. The disassembled phone should be individually simply buried in rice and literally overnight it will draw all the moisture out of it. The remaining dust can be easily removed with a dry cloth.
• Silica gel. If you recently bought a new pair of shoes and have not yet thrown out the box, then you can use special small balls that shoemakers pour into their products to remove excess moisture. They are also suitable for drying a phone that has fallen into water.
• Cat litter. Its purpose is exactly what is needed. It is better to use a fine litter and carefully ensure that your pet does not confuse the place where it needs to go to the toilet.

Other types of liquid

We told you how to properly dry a phone or smartphone that has fallen into water, but it often happens that they fall into other liquids, which, in addition to moisture, also contain sugar, all kinds of sticky substances, and even brewer’s yeast. In this case, in addition to getting wet, contamination will certainly follow. The first instinct of many people is to rinse the device under a stream of clean water. Do not do that.

Follow the algorithm of actions given above, the main purpose of which is to dry the phone. After this, the dirt will need to be thoroughly wiped off with wet wipes and dried again. Of course, this takes a little longer, but it eliminates additional damage.

Probably every person has dropped their phone into water at least once in their life. In most cases, such an incident ends in failure. I have to go to the store to buy a new device. But is everything as bad as it might seem at first glance? Professionals give practical advice that will help rehabilitate the device.

What to do if your touchscreen phone gets wet? First, turn it off immediately. The less time he spends in the water, the more likely he is to continue working. Do not turn on a wet phone - a short circuit may occur.

As soon as you remove the phone from the water, it is advisable to disconnect all removable parts if possible. We are talking about the battery, port covers, slots (in smartphones), etc. If the case is easy to disassemble, then you can remove it. This will prevent moisture from accumulating on the internal circuits.

We must not forget about SIM and memory cards. Before putting the device to dry, they must be removed. It is important to wipe all parts with napkins or a soft cloth. Then place them on a paper towel in a well-ventilated place.

What to do if the speaker on your phone gets wet? Some users advise drying it with a vacuum cleaner. It takes approximately 20 minutes to blow through the part. This will help remove any remaining water if it has already seeped inside. However, you must be prepared for the fact that the speaker will have to be replaced with a new one. Most often, after getting wet, it begins to hiss and wheeze.

Under no circumstances should you use a hairdryer to dry your gadget. Even cold air can cause harm. It will simply push the water droplets deeper, so they can easily penetrate the chip. And this will lead to failure of electronic parts. After this, the phone cannot be rehabilitated.

The beneficial properties of rice cannot be underestimated. It is not only a nutritious product, but also moisture-absorbing. Wondering what to do if your phone gets wet? It is necessary to prepare a container of such size that the device will fit there. Pour rice into it. Immerse the device for at least 2-3 days. There is no need to rush. Rice absorbs moisture slowly but efficiently. The only thing you need to do is turn it over periodically.

If you don’t have rice or you simply don’t believe in its properties, then you can use silica gel. This absorbent material is placed in shoes to absorb moisture. This gel copes better than rice. You will need to turn the phone over every hour, checking whether droplets of water have accumulated on its surface. If there are any, you will have to wipe the case again with a paper towel. After this procedure, the phone is re-immersed in silica gel.

What to do if your phone gets wet? First of all, follow the instructions described above. After this, you can place the device on the windowsill, where the rays of the sun penetrate. This is necessary so that the deep holes dry out. However, it is important to ensure that the phone does not overheat too much. This may damage some parts.

When disassembled, the phone should dry out for at least a day. After this, you need to carefully inspect it, especially the connectors, compartments and other recesses. After making sure that there is no moisture, you can replace the battery and turn on the device. In this case, it is advisable to listen to see if any problems arise inside the case. extraneous sounds, such as crackling or hissing. This indicates that some parts are not functioning correctly.

Did you get your phone wet? Doesn't turn on? What to do? Have you already tried all the methods described above, but it doesn’t help? The main thing is not to lose composure. The most common reason is a dead battery. Before connecting to the network, you should make sure that the phone is completely dry. It should be turned on again no earlier than after 5-10 minutes. If the device shows no signs of life, then only go to the service center.

Conclusion

So, what to do if your phone gets wet has already been told. Now, in conclusion, a few recommendations:

• It is advisable to purchase a special “rescue” kit for devices that have gotten moisture inside.
• If the phone is “dipped” in salt water, then be sure to wipe the contacts, for example, with alcohol. You can use clean fresh water for these purposes.
• Under no circumstances should the phone be connected to a charger.
• Rechargeable battery Do not expose to prolonged heating.
• It is not advisable to disassemble the device without skills. You may ask, what to do if your phone gets wet? Entrust this matter to professionals.

Sometimes a few drops of water or high humidity are enough for the phone to break or stop working properly forever. Undoubtedly, the best solution would be to seek help from service workers. But what to do if this is not possible?

10 first aid tricks for you cell phone if he gets wet.

1 . The phone must be removed from the water as soon as possible and turned off immediately. The fact is that phone parts let water through in a matter of seconds. Do not turn on your phone until you are sure it is dry. In addition, water that gets into the phone can cause short circuit.

2 . Immediately after removing the phone from the water, remove the cover and remove the battery. This will help reduce the risk of damaging internal circuits. Gently dry the phone and its parts with paper towels or a soft cloth.

3 . Remove the SIM card. It should be wiped dry, set aside and allowed time to dry until the phone itself is ready for use.

4 . You need to unplug and remove everything peripherals, such as headphones, memory cards, as well as anything that can clog gaps, crevices and cracks in the phone (cases and protective films).

5 . If you have a vacuum cleaner on hand, use it to blow out the water. To remove residual moisture, you need to blow off each part of the phone for 20 minutes. In this case, the phone must be blown from all sides, constantly turning it.

Don't put your phone too close to the vacuum cleaner hose, otherwise static electricity will form, which will be even worse for your phone.

6 . Do not use a hair dryer to dry your phone, even on the “gentle” setting. By doing this, you can blow moisture from the surface further into the phone, this is especially dangerous for electronic components, hidden deep inside the phone. You can also melt some parts of the phone.

7 . You can try to dry your phone by immersing it in a bag of dry rice. Rice draws out and absorbs moisture well, so there is a chance that all the moisture from the phone and battery will be absorbed into the rice and this will slow down corrosion. When placing your phone in rice, you should remove the cover, take out the battery and put them in the same container.

You need to keep your phone in a bag or container with rice for at least 2-3 days. This process is slow and rushing will only do harm. While the phone is drying, you need to turn it over from time to time so that the water is better absorbed.

Instead of rice, you can use silica gel, which is often put into shoes and other items when sold; it absorbs moisture better than rice.

It is worth checking the phone, placed in a container with absorbent material, every hour for the first 6 hours. If moisture has collected on the surface, you need to dry it again with paper towels or blow it with a vacuum cleaner.

8 . Place the phone in a sunny place to allow all openings to dry completely.

You can place the appliance on absorbent wipes or paper towels, even if it has previously been dried with a vacuum cleaner or placed in a container with rice. This will help absorb any remaining moisture from the device.

9 . After at least 24 hours, check that the outside of the mobile phone appears dry. It's worth checking all the ports, compartments and slots. If your phone looks dry and clean, you can replace the battery and try turning it on. Pay attention to possible strange sounds and noises that accompany the switching process: if there are any, then this is a sign that the phone is not functioning properly.

10 . If your phone appears dry but won't turn on, a dead battery may be to blame. Put your phone on charge. Then try turning it on again.

If connecting to the charger also does not help, then you should still try to contact a service center. But there is no need to hide the fact that it was damaged by water - the phone still has indicators that show the cause of the malfunction. The more detailed the circumstances are, the easier it will be for specialists to identify the breakdown and fix it.