How to dry a phone with a non-removable battery. How to dry a phone that has been dropped in water? The worst situation

Articles and Lifehacks

Falling into water can be a serious threat to the life of your mobile phone, so it is important to know how to resuscitate it, such as drying the phone with rice.

This process consists of a number of stages, the sequential implementation of which will increase the chances of restoring the working condition of your mobile phone.

First steps before drying

• First you need to remove the battery from the phone to avoid a short circuit. After that, remove the SIM card and wipe the body of the device dry with paper towels.
• Try as much as possible to remove the water that got inside the phone. To do this, gently shake it and wipe it with napkins.
• To make this process easier, try to use a screwdriver to remove as many parts from the phone as possible. This way you can blot them with a tissue and remove more moisture.
• Remember to periodically shake your phone and remove moisture with dry wipes.
• You can also use a vacuum cleaner to remove more moisture. It will draw out the water that you could not extract by shaking the device.

Drying process

In general, any material that absorbs and draws moisture well is suitable for this procedure. For example, rice can be replaced with silicone balls, a bag of which is placed in a box with shoes in stores. However, rice will be more effective.

1. Pour the rice into a plastic container with an airtight lid or a plastic bag.
2. Put your phone in a bowl of rice and leave it overnight in a warm place.
3. The rice will draw any remaining moisture out of the phone, greatly increasing the chances that your phone will still work.
4. It is very important that the rice is dry, otherwise it will not be able to absorb excess moisture.
5. If after this procedure your phone does not work, try contacting a service center.

With the growth of technology, the availability expensive smartphones people are no longer rare. But often they slip out of the hands, and sometimes, sadly, right into the water. You can forget your phone in the pocket of some item sent to washing machine. But do not worry, because if you act quickly, the device can be saved. To do this, it is important to know a few recommendations on how to dry your phone.

The first necessary measures

To "reanimate" the fallen into the water mobile device action must be taken as soon as possible. After all, the future of the apparatus depends on the first actions:

How to dry your phone properly

When the device is turned off and the battery is removed, you must immediately subject the device to emergency drying. But to make it right, it is worth considering a few tips on how to dry your phone at home:

If the battery is not removable, after turning it off, as far as possible, you need to disassemble the device and immediately contact the service center. There, the device will be opened and the battery power will be turned off. It should be noted that even when the smartphone is turned off, the circuit is connected to the battery, and it will deteriorate if water enters.

Checking the operation of a mobile device

After drying, you can check how the device works:

If the check showed that there are no problems, then everything ended well. In case of problems in the form of a breakdown, you need to contact the service center.

How to dry the phone from water correctly and quickly is now more or less clear. The algorithm of actions is not so complicated. But it happens that when a problem arises, people act with violations, as a result of which the apparatus breaks down.

What to do is prohibited

How to dry the phone from water is safe for the device - there are additional warnings for this:

There are a lot of situations when our smartphone can meet with water. You can get caught in a heavy downpour, knock over a cup of drink on a nearby smartphone, or even drop your phone into the water while taking a hot bath. Recently, smartphone manufacturers have been trying to introduce water protection into their devices. However, the percentage of such devices is still very small, so our article will be relevant for a long time.

We will talk about what not to do if your smartphone gets wet, as well as several ways to fix the current situation.

1. Pull the smartphone out of the water, turn off and disassemble

As we were taught in the lessons of life safety, the first thing to do is get rid of the source of danger. In our case, we immediately take the device out of the water and turn it off. The smartphone has both slots and headphone / charging connectors, through which water will instantly reach the insides and be able to cause short circuit. After you take out the phone, you need to wipe it with a dry towel, and also pull out the battery. So you completely de-energize the device and reduce the likelihood of a short circuit to zero. Together with the battery, we advise you to pull out the SIM card and memory card.

IMPORTANT

Do not turn on the smartphone until you complete all the steps in the instructions.

2. Wipe well all parts of the device

After you take out the device, you need to thoroughly wipe it with a dry towel to get rid of all visible moisture. Do not use regular napkins or paper towels. It's no secret that paper napkins not only absorb moisture very well, but also quickly soak, breaking up into small fibers. These lint will get into the holes and crevices of the device and will only make things worse.

Take a rag or cloth towel and wipe the device dry both outside and inside, if water has got there. Do not leave a single drop on the surface, because any little thing can cause corrosion and lead the device to inoperability.

3. Hair dryer or vacuum cleaner?

For most people whose phone has fallen under water, the following situation occurs. They successfully fulfill the first two points of our article, but then they start looking for additional solutions, what else can be done for a wet device. The most popular options are hair dryers and vacuum cleaners.

REMEMBER! Never use a hair dryer to dry your phone. Contrary to the thoughts that hot air will quickly dry out all the moisture, you need to understand that the air flow will not only drive the water even deeper, but can also melt some details.

You can use a vacuum cleaner to speed up the drying process. During drying, do not hold the hose too close to the smartphone, carry out the procedure for 7-10 minutes.

4. Put the phone in the sun in a box of absorbent or rice

Finally, when all the main steps are completed, you can proceed to the longest stage. The disassembled phone (we pulled out the battery, SIM card, USB flash drive) should be placed in a container with an absorbent. You have probably seen bags with such a substance in shoe boxes.

You can purchase such a substance in the store in advance, in case of such an unforeseen situation. But, if the water intrusion caught you by surprise, regular rice can be a good “homemade substitute”. Put the device in the substance for a day and turn it over periodically, allowing water to flow out of all the cracks. Only after a day, making sure that all the water is gone from the phone, you can try to start it.

If the device does not work, feel free to go to the service center.

5. What not to do

Finally, we want to list what absolutely cannot be done if your phone fell into the water

• You can't turn on the device right away. You can turn on the phone only after complete drying, when you have waited a sufficient amount of time for all the moisture to come out of the device. Naturally, in a “wet” state, the device is strictly forbidden to be connected to a power source (put on charge or connected to a computer).
• Do not disassemble the device into parts. Most likely you are not an expert, and by disassembling the smartphone into parts (more than pulling out the battery), you will only make it worse. The water will go even deeper, and you will break something.

All the best. Take care of yourself and your phones 🙂

If mobile phone fell into the water, do not despair. Even if you dropped your phone in the sink, toilet or bathtub, it can be recovered. Most importantly, act fast! Get your device out of the water as soon as possible. Then turn it off, remove the battery and disconnect all accessories. Try to remove as much water as possible with towels and a vacuum cleaner. Then place the device in a bowl of rice or other absorbent material for 48 to 72 hours. If you act quickly, the phone will continue to work.

Steps

Act quickly to minimize water damage

Get your phone out of the water as soon as possible if it is not plugged into an electrical outlet. How longer phone is in the water, the more damage will be done to it. If the phone has been in the water long enough, it will not be possible to restore it.

Unplug the power cord if the phone is plugged in and in water. If your phone is plugged into an electrical outlet, unplug the power cord first, and then remove the device from the water. If you do not do this, you will receive an electric shock.

• It will be better if you turn off the power in the electrical panel.

1. Turn off your phone immediately, even if it is running. Otherwise, it will lead to a short circuit. If the phone was in water, consider that it is inside it, even if the device is working.

   • Do not turn on the phone to see if it works.

2. Remove the battery cover and take out the battery, then put them on paper towels. After taking your phone out of the water, quickly grab some paper towels or a soft, dry cloth. Put your phone on them, and then remove the cover and remove the battery. In most cases, this will require a Phillips screwdriver. If you have an iPhone, find a special Pentalobe screwdriver.

   Remove the SIM card if your phone has one. Now wipe it with a dry paper towel or cloth. Lay the card on a dry cloth or paper towel to dry. If your phone does not have a SIM card, skip this step.

   • The SIM card can store valuable data such as contacts. Therefore, in some cases it is better to take care of the SIM card than the phone.

3. Disconnect accessories connected to the phone. Remove the protective case, remove the SD card, turn off the headphones or other devices connected to the phone. Make sure that air has access to all ports and slots on the phone so they can dry out.

   How to dry your phone

   1. Soak your phone in a bowl of rice for 48-72 hours. Pour 1 kg of instant rice into a large bowl. Now immerse the phone and the removed battery in fig. The rice will absorb the moisture that is inside the device.

   2. Use silica gel bags instead of rice (if you have them). Place the silica gel bag(s), phone and removed battery in a container. Now leave your phone alone for 48-72 hours to allow the gel to absorb the moisture left in the phone.

      • Silica gel bags are small bags found in new shoe boxes, new wallets, and other products.
      • Speed ​​is the most important factor when restoring a wet phone, so use rice or another desiccant if you don't have silica gel bags.
      • You don't need to open the bags. Just put them in the container along with your phone.

   3. Submerge your phone in half a kilo of silica gel cat litter. Use it if you don't have rice or silica gel bags. Pour the cat litter into a 2 liter bowl. Now put the phone and the removed battery on the filler. Then fill the phone and battery with the rest of the filler.

      • Silica gel cat litter is available at grocery stores and pet stores.
      • If the filling is not made of silica gel, do not use it.
      • You can also use moisture absorbers such as couscous or oatmeal.

   4. Remove water from the phone with a vacuum cleaner. Put a special nozzle on the hose of the vacuum cleaner. Now turn on the vacuum cleaner at maximum power and bring the nozzle to each hole of the phone.

      • Use a wet vacuum cleaner. A conventional vacuum cleaner may be damaged if water enters it.
      • This is the fastest method that will help you dry and restore your phone in 30 minutes. But do not turn on the phone after half an hour if it has been in the water for quite a long time.

   5. Use an air compressor to remove water from your phone. Switch the air compressor to low pressure mode, and then blow out the surface and openings of the phone.

      • You can also use a can of compressed air.
      • If the compressor is operated at high pressure, damage may result. internal components phone.
      • Do not use a hair dryer to dry your phone. Warm air can damage device components.

Just passed yesterday iPhone presentation 7 which, according to the manufacturer, will receive protection from the effects of water. This, of course, is not a new thing, today many flagships already have this protection is present, which allows you to maintain the performance of the smartphone even if liquid gets on it.

Moisture protection is certainly cool, but now I would like to give some advice to the owners of those smartphones and phones that do not have such protection. That is, the essence of my advice will be how to save a wet phone so that it will serve you faithfully for more than one year.

Everyone met, and some even got into such situations, when you were on the street made not easy rain, and a downpour due to which not only clothes got wet, but also all the contents of your pockets, well, or other things. Or maybe you were doing something near the sink and at the same time talking, holding the phone with your shoulder, not holding it, which safely sank to the bottom of the sink or fell under the tap. And of course, the toilet is another of the most popular places after which you sometimes have to dry your gadget.

Here are some tips from me on how to dry your phone if you suddenly find yourself in such an awkward situation.

How to properly dry a wet phone

So, I can immediately say that if your smartphone gets into the liquid, you should immediately remove it from there, especially if it does not have such protection as was discussed at the beginning of the article. Since excessive interruption of the phone in a humid environment will lead to the fact that in the final result you will get a brick.

What to do after taking your phone out of the water

1. As soon as you take your smartphone out of the water, the first thing to do is turn it off, as many immediately rush to check whether everything is fine with it, it still works, and because of this, a short circuit may occur. It turns out that you will simply finish him off with your check.
2. After removing the smartphone, it must be immediately wiped with a paper towel or several napkins, as an option it can be a cloth, the main thing is that it be soft so as not to damage the screen or case with it.
   
3. After that, you should disconnect everything that we additionally connect to the phone. This applies to the case, back cover, battery, SIM card, earpiece, if any, memory cards, and all sorts of other peripheral pieces.
4. Now, using the same towels, we gently wipe everything that is left of the water inside the phone, and then everything that was removed from it ( battery, sim card, memory card). In general, we are trying to remove as much as possible from the surface of the gadget, which is associated with liquid. In this case, in no case do not shake the phone, because in this way you will only drive water deeper into the boards, hitting which can cause corrosion.
5. If your phone is very easy to disassemble, I have to insert the front panel, or you know how to do it without any problems, then do it, and then remove all the remaining water.
6. Since it is impossible to blow out water with air, because of the high chance of it getting deep into the phone, it is recommended to take a vacuum cleaner and gently dry the phone using this device for half an hour. The main thing is not to lean the hose too close to the phone, so as not to harm it with this.
7. If you think this is not effective, then try using rice. Since rice is a very good absorbent, it will help you dry your wet phone quickly and efficiently. To do this, we need rice and a bag that closes on top or a plastic container, in general, something that will allow us to create tightness. Having fallen asleep rice, we put the phone in it and leave it for a while.
   
8. You can also try to cover the phone with bags of silicone gel, which sometimes come across in boxes with new things. But, since few people keep them, this method is not the most relevant. Of course, if you are the kind of person who collects something like this, then you are in luck.
   
9. And finally, after rice, to consolidate the result, you can place the wet device in the sun while placing all the same paper towels under it.
10. At the end of the day, you can insert the battery back and check the phone's performance. If it doesn't turn on right away, don't panic, try plugging in Charger, perhaps your battery was discharged or had time to discharge during all this time.

The main thing is not to dry your gadgets with a hair dryer or on batteries. I remember in the era push-button phones a lot of people did that. You should also not put it on the heater, even if you put something under it, believe me, this way you will only speed up your purchase of a new phone.

In general, good luck to you, I believe that you will only have a positive result. But even if the phone is dry and does not turn on, then try to take it to service center, perhaps the wizards of digital technology will be able to restore it.

Oh, and don’t forget to dry and wipe all the peripherals that were in the phone, putting it on a cloth, towel or napkins, as well as