How to charge Apple Watch: features and recommendations. How long does the Apple Watch actually hold a charge? How to tell if your Apple Watch is charged

U Apple Watch A weak battery is their main disadvantage. The battery only lasts for a day of even use. But sometimes the Apple Watch does not charge well or stops responding to the charger altogether, so you need to know what measures can be taken in this case.

How to find out if charging is in progress

When you connect the charging cable to your Apple Watch, you should see a green icon. If the screen does not turn on, you should leave the watch on charge for about half an hour.

Photo: Apple Watch charging indicator

How to charge Apple Watch

To prevent breakage smart watch, after purchasing the device, you need to immediately familiarize yourself with how to properly charge the device:

  1. When the charge scale indicator is low, a red lightning icon appears on the watch screen.
  2. Before charging, you need to remove the gadget.
  3. The cable must be connected to the power supply (or to a computer port via USB). If the owner uses the station, then the watch should be placed on it with the back side facing magnetic disk.
  4. You should leave your iWatch charging until the green lightning icon appears on the screen. It should be remembered that while connected to the charger, the watch goes into night mode.

What to do if Apple iWatch does not charge and does not turn on: instructions

If the watch does not charge, do not disassemble it under any circumstances. Better follow these instructions:

  1. Make sure the magnetic charger for Apple Watch is working: it is plugged into a power outlet.
  2. Use the original power adapter and charging cable - the same one that came with your Apple Watch.
  3. Don't forget to remove protective film on all sides of the magnetic mount.
  4. Wipe the back of the watch and its charging device.
  5. Place your smartwatch face up on the charger, the magnets will align it, and your Apple Watch will begin charging.
  6. If the charging process has not started, you need to perform a forced reboot.

How to charge an Apple watch without a native charger?

There are several ways to charge a smart watch without a native charger:

  1. Choose a universal charger.
  2. Choose a universal magnetic charging cable.
  3. Connect the cable (included) to your laptop or smartphone.

In each case, it is necessary to periodically check the charge level.

iWatch won't turn on

There are several reasons why a smartwatch won't turn on:

  1. The device is not charged.
  2. A mechanical failure has occurred.
  3. Moisture has entered under the watch case.
  4. The power button is broken.

In the first case, you need to charge the device; in the rest, you should take the watch to service center and consult a specialist.

How to force reboot

You can force restart your Apple Watch only in exceptional cases. To do this, press and hold for ten seconds side button together with the wheel. If the Apple logo lights up, then everything is done correctly.

If these instructions did not help you, please contact technical support Apple, and they will definitely help you figure out why your Apple Watch won’t turn on or charge.

Apple Watch gets warm when charging

The watch has a temperature sensor that responds to changes in the internal temperature of the device. If the smart watch heats up within normal limits when charging, then everything is fine. But if the watch gets very hot, there are several reasons for this.

The unique Apple Watch product has a huge number of unique features. Considering that smart watches are primarily electronic device, then a completely reasonable question arises: how will Apple Watch owners charge their mobile devices? The second quite understandable question is how long can the device go without recharging?

When buying such a multifunctional and elegant thing as an Apple Watch, you want the device to work as long as possible without recharging. After all, if smart watches discharge as quickly as tablets while watching a movie, then this device will not be enjoyable.

As it turned out, this device Allows you to charge for approximately 18 hours. This is not much, because every evening you will have to charge your device again. But there are situations when it is not possible to charge the device. Especially topical issue Apple chargers Watch is worth it for those who regularly go on long business trips or travel. Let's look at the main options for charging smart watches.

Apple Watch charging options

There are several charging options for Apple smartwatches. So let's look at each of them.

1.​ Charging via special cable MagSafe – this adapter allows you to charge your Apple Watch if you have access to an outlet. The cost of such a device is 29 US dollars. Charging with a cable can be very inconvenient. If you spend a lot of time at work, then to recharge your Apple Watch you will need to buy not only an adapter, but also a special cable, which costs almost forty dollars.

2. Reserve Strap– a unique means for recharging Apple Watch without removing it from your hand. The concept is based on the fact that special two small batteries will be inserted into your smart watch, which will be able to recharge your device.

The question regarding recharging the Apple Watch smart watch still worries many users new development. But you can be sure that the developers will solve this problem in the very near future.

21.05.2018 21.05.2018

WHAT IS THE ARTICLE ABOUT?

Two ways:

  • Using the Apple Watch charger
  • Using the Apple Watch Stand

This article explains how to charge your Apple Watch, both using the included charger and using the Apple Watch stand.

Method 1: Use the Apple Watch charger

1. Connect the charger to a power outlet

Side charging block The charger cable should plug into most standard electrical outlets. If the charger cable is separate from the wall end of the charger, first connect the rectangular end of the cord to the charger block port. The cord should only go in one direction.

2. Place the charger face up on a flat surface

The slightly wrinkled side of the charger disk should be facing up, and the flat side of the charger disk should be facing down on a flat, level surface.

3. Place your Apple Watch on a charger

The Apple Watch should be facing the charger. You'll notice a slight magnetic pull when you place the Watch on the charger, and the progress indicator and charge percentage will light up on the screen.

4. Leave your Apple Watch to charge

5. Place Apple Watch on your side to enable Nightstand mode

Nightstand mode uses snooze and stop signals on the buttons on Apple Watch. The screen displays the time and battery ring, as well as the date and next alarm.

Method 2: Use the Apple Watch stand

1. Buy an Apple Watch stand

Unlike watch docks, watch stands have spots that can power your Apple Watch.

2. Route the Apple Watch cord through the stand

How you do this will depend on the Apple Watch stand itself.

Some Apple Watch stands have a charger cable built into it, in which case you will need to connect the charger cable iPhone devices to the rear or side pillar.

3. Connect the charger to a power outlet

The charging block side of the charger cable should connect to most standard electrical outlets.

If the charger cable is separate from the wall end of the charger, first connect the rectangular end of the cord to the charger block port. The cord should only go in one direction.

You can also unplug the cable from your unit and then plug the rectangular end of the cable into your computer's USB port, provided it is USB port 3.0 with charging capability.

4. Place your Apple Watch back on the charger

Wherever the charging disc is located on the stand, the back of the Apple Watch must be attached to the back in order to charge.

5. Leave your Apple Watch to charge

You can track your charge progress by viewing the battery percentage at the bottom of the screen.

When the Apple Watch has "100% Charged" at the bottom of the screen, you must remove it from the charger.

6. Place your Apple Watch on your side to enable Nightstand mode

This is not possible for some Apple Watch stands. Nightstand mode uses snooze and stop signals on the buttons on Apple Watch. The screen displays the time and battery ring, as well as the date and next alarm.

Indicators at the top tell you if you're not connected to your iPhone or Wi-Fi, and if you have notifications. The charging indicator is never displayed.

Brief summary

  • To charge your Apple Watch using a regular Apple Watch charger, start by plugging the charger side into a standard electrical outlet. Make sure the rectangular end of the cord is securely inserted into the unit and place the round end of the charger on a flat surface. With the charger side extended up, place back Apple Watch in a circle. You should feel a slight magnetic pull as the watch moves closer to the charger. Let the watch charge until “100% Charged” appears at the bottom of the screen.
  • Apple Watch can stay on the charger overnight if you use it in Nightstand mode.

Warnings

  • Avoid leaving your Apple Watch plugged into a charger during daily use.

One of Apple's most anticipated products has finally reached its destination: on the wrists of its owners. And while the happy owners of the first ones are setting up their devices, testing them and downloading them to their iPhone apps To work with watches, we will analyze several interesting features of the Apple Watch.

MagSafe charging may make you look like a cheapskate

There's nothing wrong with choosing the Apple Watch Sport, the cheapest watch model. But if this issue is a sore point for you, and you even replaced the strap on your watch in order to hide its cost, don’t even think about carrying a charger with you. The plastic charger will give you away.

For comparison, Apple Watch models from the mid-range and super-exclusive (read: expensive) segment - Apple Watch and Apple Watch Edition - are equipped with metal chargers. Fortunately, all types of chargers work very quickly and the only difference between them is the case material.

MagSafe charging can charge other devices...

As Apple Insider reader Albert Lee writes, the Apple Watch charger easily charged another of his smart watches, the Moto 360. Both devices use the same charging wireless standard Qi. Mashable conducted its own test and this fact was confirmed.

This is actually a very important thing. - most popular among manufacturers mobile devices. This is also one of the three main wireless charging standards competing for leadership in the world of gadgets. Last year, two other standards from the top three - the new PowerMat and the older Rezence - joined forces. This has greatly simplified the task of manufacturers, so that now one product can support 2 standards at once.

But at some point the industry will have to choose one path and develop one standard. In any case, if wireless charging device will become as popular as micro-USB. In the meantime, thanks to Apple's choice, the balance may tip towards the Qi standard.

Or it could, if not for one fact.

...but Apple Watch doesn't work with Qi chargers from other manufacturers (at least not yet)

Let's go back to the Mashable tests. They also tried the opposite scenario - charging the Apple Watch using Qi chargers from other manufacturers. So, in reverse side this does not work. They tested 2 different charges, but could not find out the reason. It could be technical problem, and maybe physical incompatibility of the design of the watch and chargers.

We don't know which version of Qi was used in the test, and that matters. Old versions were famous for their incredible demands: the device had to be charged in one strictly defined position. But last year the standard received an update and began to support a more flexible type of charging - resonant. It is less demanding and can transmit energy over longer distances. It is possible that Apple products work with more new version Qi and Mashable tested with older models of chargers when newer models might have worked.

We've already seen third-party watch chargers in the form of docking stations and external batteries, and it's logical to assume that these devices aren't just for Apple.

Apple watches could become a starting point for the widespread introduction of wireless charging

The last few months have been very good for Qi charging. Ikea presented a collection of furniture with built-in wireless chargers - now you can charge your phone by simply placing it on a table or bedside table. For Apple, the move to wireless chargers could have a major impact on its entire product line. Let's take for example, which, to everyone's surprise, is equipped with only one port. If the watch is successful, the next laptop model may also get wireless charging. In this case, the only laptop port will no longer be such a problem. And over time, iPhones and iPads may also receive Qi charging.

Apple's course may be "far from innovative, especially compared to other wireless charging technologies," as IHT analyst Ryan Sanderson put it in a press release sent to me after the watch was announced. But he doesn't need to be innovative. Apple products tend to boost companies, technology standards, and even entire industries when they are used. So, being at the very beginning of the path to mass use wireless chargers might get a push in the right direction.

Rehabilitation of the digital crown that is so discouraging to everyone: use underwater!

The water resistance of the Apple Watch is no secret; it is one of the functions of the watch. But when FoneFox arranged for the watch - showering with the watch on his hand, swimming in the pool and immersing the device in a bucket of water - it turned out that touch screen does not work underwater.

Fortunately, the digital crown copes with this task perfectly, confirming its usefulness in the design of the watch. Just don't take this as an invitation to do such a test yourself.

The watch can measure blood oxygen levels (but won't)

When iFixit tested the 38mm model of the Apple Watch, they discovered that the heart rate monitor could measure not only the number of beats per minute, but also the level of oxygen in the blood. In medicine, this method is called pulse oximetry. It helps monitor the oxygen level in the blood of a patient under anesthesia during surgery, as well as when taking medications for lung diseases and strenuous exercise.

Naturally, this makes me think of certain sports - rock climbing, or, remembering the water resistance of the watch, not very deep diving. But we have to stop here. The iFixit team believes Apple is keeping this sensor quiet due to federal regulations. Measuring blood oxygen levels straddles the line between fitness and medicine, and the US Food and Drug Administration (FDA) can be quite picky when it comes to approving medical devices.

At this point, we don't know if this sensor will be used as a tool in an Apple research project, or if it's just a way to please extreme athletes. For now, we only know that such a sensor exists and is waiting in the wings.

Some parts are easy to replace...

Batteries have a limited service life. Most often, it is measured by the number of charge-discharge cycles before malfunctions or complete failure. The Apple Watch battery will also expire over time. For some watch owners, this may prompt self-replacement battery

So there's good news and bad news. The battery is easy enough to replace yourself and is only held in place by a small amount of glue. But first you need to get to it - there is a clock screen on the way. To soften the glue holding the screen and disconnect the cables from the display, the watch needs to be heated. , this can be quite a challenge.

Other elements of the watch - wires, speaker, buttons and Taptic Engine, as well as all its tiny screws - can be a challenge for farsighted people, but the task does not seem overwhelming. However, the watch processor seems to be firmly attached.

Please note that attempting to open the watch and perform repairs yourself will automatically void the warranty. Such experiences are not for the faint of heart or those with poor eyesight. (Watchmakers use a magnifying glass for a reason.)

...and some are not so easy

The S1 “processor” inside the Apple Watch is actually a whole unit that combines the processor itself, wireless antennas, memory and sensors. Tiny but very powerful technology. Apparently, this is also the glue that holds it together.

Few Apple Watch owners will look that deeply, and judging by this, it's probably a good thing.

Despite rumors (and hopes) of an upgraded product, the difficulty of removing the S1 yourself casts serious doubt on the idea of ​​simply swapping out the internals.
Unfortunately, our first glance is met with an obstacle - the silver lid marked S1 is not a lid at all, but a solid block of plastic resin hiding all the treasures.
So the fully packaged S1 system makes board level repairs impossible.

Just like regular watches, straps will get dirty and deteriorate over time.

Your Apple Watch band won't ever look like this (unless you throw it in a fire), but it won't stay pretty forever.

Even the greatness of Apple cannot cancel the rules of basic chemistry. The watch is designed to be worn on the hand, so it cannot avoid constant contact with the skin, especially the strap. You can clean the metal of your watch, but a leather or fluoroelastomer band will never look like new again.

There are already thousands of watch apps

Watch owners can already do a ton of things with the device on their wrist: unlock a Starwood hotel room door, read New York Times headlines, shop, navigate the street, check in with Foursquare, stay updated on Expedia reservations, and much, much more.

And if that's not enough, (short for “If This Then That”, “If A, then B” - approx.) has just released watch versions of the Do Button and Do Note apps, giving its users access to 170 other apps. According to an IFTTT spokesperson, “People can easily launch their favorite ‘recipe’ with a tap on their wrist.”

Smart watches expand user control over digital services even when the phone is not at hand. You track your health, analyze your own activity, discover new places and manage wireless technologies.


But how long can the most advanced and “smart” watches in the world stay in this mode?


This article examines the autonomy of all 5 generations of wearable devices:
Apple Watch 1
Apple Watch Series 1
Apple Watch Series 2
Apple Watch Series 3
Apple Watch Series 4


How long does the Apple Watch last according to factory calculations?

All generations of wearable gadget (starting from 2014) hardly differ in battery life. Apple's notorious balance in size, hardware functionality and battery capacity is to blame for this. If you want to know How long does Apple Watch last?, then these official figures will help you get general idea.

Autonomy for all Apple Watches is official

What are the characteristics of the Apple Watch battery?

In total, several varieties of smartwatches have been released, inside of which batteries with different capacities are placed:


  • Apple Watch 1st generation 42 mm (September 2014) - 250 mAh;
  • Apple Watch Sport 1st gen 42 mm (September 2014) - 250 mAh;
  • Apple Watch Edition 1st gen 42 mm (September 2014) - 250 mAh.
  • Apple Watch Series 1 38mm (September 2016) - 205 mAh;
  • Apple Watch Series 1 42mm (September 2016) - 250 mAh.
  • Apple Watch Series 2 42mm (September 2016) - 334 mAh;
  • Apple Watch Edition Series 2 42mm (September 2016) - 334 mAh.
  • Apple Watch Series 3 38 mm (September 2017) - 279 mAh;
  • Apple Watch Series 3 42 mm (September 2017) - 352 mAh.
  • Apple Watch Series 4 40 mm (September 2018) - 225 mAh;
  • Apple Watch Series 4 44 mm (September 2018) - 293 mAh.

How long does the Apple Watch last in real use?

Official measurements for Apple Watch Series 1 and 2:

Mixed use - around 18 o'clock;
up to 3 hours;
listening to music - up to 6.5 hours;
fitness training - up to 8 o'clock.

Official measurements for the latest generation Apple Watch Series 3 (with GPS):

Mixed use - around 18 o'clock;
in conversation mode - up to 3 hours;
listening to music - until 10 o'clock;
fitness training - up to 5 hours with GPS enabled and until 10 o'clock no navigation.

Difference between Apple Watch Series 4 and Series 3 in operating time:

In conversation mode - Series 4 lasts 1 hour less;
in GPS mode - Series 4 lasts 1 hour longer.


Battery test for all Apple Watches using the Leica Dad method

YouTube channel Leica Dad carried out measurements of equal use of all existing Apple generations Watch. You can find out how long they work in the video above.


First, the resource-intensive fitness tracking application Workout App is launched with maximum load to the battery. Then, in mixed mode, the author of the video simultaneously loads the gadget. After 10 hours the percentage is fixed. The general indicator of how long the Apple Watch works is calculated based on the measurements obtained in testing.

Leica Dad test result



Leica Dad also offers to compare the 42mm and 38mm versions using the Series 3 generation as an example. Initially, the gadget is turned on in mobile internet in the LTE network for 4 hours until the percentage is fixed, and then switches to a more energy-intensive Wi-Fi network and after 8 hours the percentage level is noted again. So, how long does the Apple Watch 3 hold a charge with different case sizes?

How much does the size of the case affect autonomy?

What to do if your Apple Watch runs out of juice quickly?

Now you know the exact result of how long the Apple Watch charge lasts after filling the battery to 100% with various methods measurements and actual operating experience. If your experience differs from these data to a lesser extent, then use several options to solve the problem.



The creators of “smart watches” are forced to choose between the compact size of the gadget (it should look neat on the hand) and the ability to perform the functions of an advanced phone companion throughout the day. Therefore the figure in 18 hours for autonomy of a wearable device, like Apple Watch in mixed mode, is fully justified by engineering design.


What Apple Watch operating time would suit you? Write in the comments what smart watch you have and how long it holds a charge. Or send a message to us on VKontakte