This interface is not supported. How to fix EXE error. This interface is not supported Explorer exe the interface is not supported Windows 8

An error appeared on some computers: explorer.exe "interface not supported". Not rolling back the restore point, not updating did not give positive results. After the error occurred, the system began to behave horribly: programs stopped working (exe simply did not execute), Explorer did not open - in general, it was not possible to debug and find out the reason

The problem was with the dll libraries. There are several solutions. On one computer one thing will help, on another - another:

The first solution to the "interface is not supported" problem in Windows 7

Create .bat. Run it as Administrator and then restart your computer:

Regsvr32 comcat.dll /s regsvr32 CSSEQCHK.DLL /s regsvr32 shdoc401.dll /s regsvr32 shdoc401.dll /i /s regsvr32 asctrls.ocx /s regsvr32 oleaut32.dll /s regsvr32 shdocvw.dll /I /s regs vr32 shdocvw.dll /s regsvr32 browseui.dll /s regsvr32 browseui.dll /s regsvr32 browseui.dll /I /s regsvr32 msrating.dll /s regsvr32 mlang.dll /s regsvr32 hlink.dll /s rem regsvr32 mshtml.dll /s regsvr32 mshtmled. dll /s regsvr32 urlmon.dll /s regsvr32 plugin.ocx /s regsvr32 sendmail.dll /s rem regsvr32 comctl32.dll /i /s rem regsvr32 inetcpl.cpl /i /s rem regsvr32 mshtml.dll /i /s regsvr32 scrobj .dll /s regsvr32 mmefxe.ocx /s rem regsvr32 proctexe.ocx mshta.exe /register /s regsvr32 corpol.dll /s regsvr32 jscript.dll /s regsvr32 msxml.dll /s regsvr32 imgutil.dll /s regsvr32 thumbvw.dll /s regsvr32 cryptext.dll /s regsvr32 rsabase.dll /s rem regsvr32 triedit.dll /s rem regsvr32 dhtmled.ocx /s regsvr32 inseng.dll /s regsvr32 iesetup.dll /i /s rem regsvr32 hmmapi.dll /s regsvr3 2 Cryptdlg.dll /s Regsvr32 ActXPRXY.DLL /S Reggr32 Dispex.dll /S REGSVR32 OCCACHE.DLL /S Regsvr32 OCCACHE.DLL /I /S Regsvr32 IEPEERS.DLL /S RAMSVR32 Winin et.dll /i /s Regsvr32 urlmon.dll /i /s rem regsvr32 digest.dll /i /s regsvr32 cdfview.dll /s regsvr32 webcheck.dll /s regsvr32 mobsync.dll /s regsvr32 pngfilt.dll /s regsvr32 licmgr10.dll /s regsvr32 icmfilter.dll /s regsvr32 hhctrl.ocx /s regsvr32 inetcfg.dll /s rem regsvr32 trialoc.dll /s regsvr32 tdc.ocx /s regsvr32 MSR2C.DLL /s regsvr32 msident.dll /s regsvr32 msieftp.dll /s regsvr32 xmsconf.ocx /s reg svr32 ils .dll /s regsvr32 msoeacct.dll /s rem regsvr32 wab32.dll /s rem regsvr32 wabimp.dll /s rem regsvr32 wabfind.dll /s rem regsvr32 oemiglib.dll /s rem regsvr32 directdb.dll /s regsvr32 inetcomm. dll/ s rem regsvr32 msoe.dll /s rem regsvr32 oeimport.dll /s regsvr32 msdxm.ocx /s regsvr32 dxmasf.dll /s rem regsvr32 laprxy.dll /s regsvr32 l3codecx.ax /s regsvr32 acelpdec.ax /s regsv r32 mpg4ds32.ax /s regsvr32 voxmsdec.ax /s regsvr32 danim.dll /s regsvr32 Daxctle.ocx /s regsvr32 lmrt.dll /s regsvr32 datime.dll /s regsvr32 dxtrans.dll /s regsvr32 dxtmsft.dll /s rem regsvr32 vgx. dll/ s regsvr32 WEBPOST.DLL /s regsvr32 WPWIZDLL.DLL /s regsvr32 POSTWPP.DLL /s regsvr32 CRSWPP.DLL /s regsvr32 FTPWPP.DLL /s regsvr32 FPWPP.DLL /s rem regsvr32 FLUPL.OCX /s regsvr32 w shom.ocx/s regsvr32 wshext.dll /s regsvr32 vbscript.dll /s regsvr32 scrrun.dll mstinit.exe /setup /s regsvr32 msnsspc.dll /SspcCreateSspiReg /s regsvr32 msapsspc.dll /SspcCreateSspiReg /s regsvr32 lic dll.dll /s regsvr32 regwizc.dll / s regsvr32 softpub.dll /s regsvr32 IEDKCS32. DLL /s regsvr32 MSTIME.DLL /s regsvr32 WINTRUST.DLL /s regsvr32 INITPKI.DLL /s regsvr32 DSSENH.DLL /s regsvr32 RSAENH.DLL /s regsvr32 CRYPTDLG.DLL /s regsvr32 Gpkcsp.dll /s regsvr 32 Sccbase.dll / s regsvr32 Slbcsp.dll /s

The second way to solve the “interface is not supported” problem in Windows 7 found on the Internet

1. Run the command line as Administrator.
2. Type CD\ and press enter.
3. Type DIR *.dll /s /b > regdll.bat and press enter (this is to copy all library paths to a file).
4. Enter notepad regdll.bat and press enter, notepad will open with this file.
5. B command line enter path and press enter, copy the current paths and save them to a file somewhere.
6. Enter path=c:\windows;c:\windows\Command;c:\Windows\Program~\Accessories and press enter.
7. Check new paths by entering the command in step 5.
8. Enter C:\WINDOWS\System32\Regsvr32.exe /s C:\ and press enter, if the message “The system cannot find the specified path.” appears, then enter C:\WINDOWS\System\Regsvr32.exe /s C :\.
9. In the file opened in Notepad, replace all occurrences of C:\ with C:\WINDOWS\System32\Regsvr32.exe /s C:\ (C:\WINDOWS\System\Regsvr32.exe /s C:\) . Save file.
10. At the command line, enter regdll.bat. Re-registration will start. It will be a long walk. In this case, the system can “think” for quite a long time. If nothing changes on the command line for more than 3-4 minutes, then you need to end the Regsvr32 process in the task manager (in a 64-bit system, also Regsvr32 *32).
Errors may occur. Just click “Ok”.
11. After this, enter the value saved in step 5 on the command line.

Often users when logging in Personal Area clients such as 1C, EGAIS, etc. encounter the error "interface is not supported". This error can also occur in many other situations, such as while opening an Excel document or even when logging into online wallet like WebMobey. Today we will try to tell you as briefly and succinctly as possible how to solve this problem.

To send reporting declarations, the client needs to log in to his personal account, but sometimes when logging in, the following error occurs:

Object: undefined
Error number: 2146828275
Description: Type mismatch

The error has general character, it is difficult to determine the exact causes of the problem from the code alone. It all depends on what application or portal you are experiencing this error. We primarily recommend contacting the appropriate technical support, where specialists can help specific situation. Now we will consider only the general algorithm using the example of the EGAIS and FSRAR portal.

Solutions

1. Make sure that you have all the necessary components to log into your egais.ru personal account using a hardware key (such as FSRAR Crypto 2 and FSRAR Crypto 3). Login to EGAIS should only be done in a browser Internet Explorer using licensed and current keys, for example, Jacata or Rutoken ECP 2.0. If you cannot log into your personal account on the egais.ru portal or FSRAR using a hardware key (not electronic copy), then try the following:

• On your computer, go to “Control Panel” - “Add or Remove Programs” and uninstall the ClientSetup client and FSRAR Crypto 2;
• Go to the official website egais.ru. After that, at the top of the screen, click on the “Login to your personal account” item. Next, go to the “Read the conditions and check their compliance” section and click “Start verification”. During the check, you will be prompted to download FSRAR Crypto 3. Download it to your computer and install;
• After the installation is complete, reboot Internet browser Explorer. Next, click on the gear symbol, go to the “Internet Options” - “Security” section. Scroll to the bottom of the list and activate the “Enable protective mode” item. After that, in the “Security” tab, scroll to the bottom of the page again and click on the “Enable pop-up blocker” item. After this, try logging into your personal account egais.ru or FSRAR again. Often at this stage the error stops appearing.

1. If you have special software for recognizing certificates, for example, CryptoPRO 4.0, then for correct operation The client must have an official and valid license purchased from a certification center. This software is not suitable for use with hardware keys. CryptoPRO 4.0 is used if you have purchased certificates for submitting reports in accordance with GOST 2012. This software can be recorded on Rutoken, eToken, or, as is often the case, on regular USB drives.

1. If you cannot log into your FSRAR personal account in accordance with GOST 2012 if you have licensed software, then you must do the following:

• Run Google browser Chrome (if the browser is not installed on your computer, install it from the official website.
• Follow the link https://chrome.google.com/webstore/cate to enter the store Google extensions. In the search, enter cades browser plug and install it;
• After that, go to browser extensions and enable CryptoPro Extension for CAdES Browser plug;
• Try logging into your FSRAR personal account again.

Bottom line

We hope this material helped you solve error 2147467262 “interface not supported.” If the problem remains relevant, then contact a specialist for help, or leave a contact number with the support service.

Typically caused by incorrectly configured system settings or irregular entries in Windows registry. This error can be fixed with a special software, which restores the registry and configures system settings to restore stability

if you have EXE error. This interface is not supported. then we strongly recommend that you Download (EXE error. This interface is not supported.) Repair Tool .

This article contains information that shows you how to fix EXE error. No such interface supported.

When installing programs that can be launched from the Windows context menu, an error occurs - 2147467262 The interface is not supported. You can find out how to fix it in this article. This problem can appear on all versions of Windows OS. But more often it occurs on Windows 7. Various elimination methods will be used. If one doesn't work, use another.

Reasons for the error in Windows

Error 2147467262 may be caused by system file failures during software installation. In this case, violations could already be in the system before the programs were installed. A message appears when the user tries to use the context menu (by clicking the right mouse button (RMB)). These OS symptoms may indicate the presence of viruses on the computer, which often damage system files.

Error 2147467262 in Windows - what to do

First, try simple steps that can solve most temporary system glitches. First of all, restart your computer and try to trigger the “Interface not supported” error. The following step may help determine which program is causing the error. We need to try to boot into a “clean” Windows. To do this, follow these recommendations:

Restart your computer and try again to trigger the error. If it appears, then system services have nothing to do with it. But if the system message no longer appears, you can determine which service is calling it. To do this, you need to check one box on the service one by one and restart your PC. To speed up the process of finding a causal service, you can select not one, but several services at once. The main thing is to remember the group in order to later identify the non-working one from this group.

In the “Startup” tab, select each application that starts with Windows and click the “Turn off” button at the bottom. When logging into the system using the clean boot method, they also need to be enabled one by one to determine the cause of error 2147467262. Once you identify the service, you can temporarily disable it. Then find out how you can troubleshoot problems with this service. Also try reinstalling or uninstalling the program that you installed on your working operating system.

Recovering system files

If the previous method did not help resolve the error, let's try to restore all possible failures in the system files. Windows has its own utilities for this. You will need a stable internet connection as the utilities will need access to the Microsoft server to download damaged files. Follow these instructions:

If this method also does not help, like the previous one, try restoring the system using a Windows boot disk. The DVD from which you installed the system. To boot from the disk, you will again need to set the disk drive boot options in the BIOS. The following steps are similar to installation. Only when selecting actions you need to specify “System Restore” instead of installation. Next, follow the wizard's instructions.

Windows Fix Utility

Previously, a utility from the creators of Windows was available on the official Microsoft website. It allowed you to fix many problems on your computer and was called Windows Fix It. The developers of the utility implemented its functions differently. It has not been available at the download address for a long time. In the latest versions of Windows, developers have appropriated the capabilities of a once-existing utility in the OS's built-in Troubleshooter. In earlier versions, this item was never considered effective by users. But today, by running Troubleshoot on Windows 8.1, 10, the wizard really becomes useful.

A group of programmers developed another unofficial version of this utility. You can download it at https://windowsfix.ru/. Since the developer is unknown, check the utility for viruses before launching and installing. There is another utility for Windows 10 that also solves many errors and crashes. You can download it at http://www.softportal.com/get-42386-fixwin.html. It does not need to be installed, it is a portable program. It only requires running the executable file. For computer security purposes, the utility also needs to be checked for viruses.

If we are talking about unofficial solution methods, try downloading and running the utility from this forum - http://delphidevelop.ru/forum/29-312-1/. The link is in the first post. Everyone who tried it claims that the error was eliminated.

Other ways to solve the error

If error code 2147467262 appears and you cannot open folders on your computer, try creating a new account. It will not help solve the error on the administrator account, but you will have access to files that can be transferred to another disk, flash drive, or to the cloud.

1. If the user does not have access to the standard Start or Control Panel window, press WIN+R together and enter “netplwiz”. Press ENTER;
2. Click the “Add” button and create a new user, assigning the necessary parameters;
3. Restart your computer and select a new account.

Once you are logged in, try opening the folders where important data is located and transfer it. By saving copies of the files, you can try to restore or reinstall the system.

There is another way that can solve error 2147467262 - interface is not supported. It involves re-registering dynamic link library (dll) files. To use it, you need to enter a large number of commands sequentially. In terms of complexity, it is comparable to reinstalling Windows.

Well, what can I say, so far I am completely satisfied with the new system, and in my opinion, it looks good visually. Even the recycle bin, which everyone dislikes so much, only because it is slightly similar to the recycle bin from Windows 98, does not cause any disgust.

But still, recently, I encountered the first problem on the new Windows 10. When I tried to launch any program, I started getting an error - “”. But to be honest, I have a suspicion that this error appeared due to the installation of one utility that I ran literally before this problem appeared. So, I didn’t blame the new system.

So, when I started looking for a way to fix the “Interface is not supported” error, the first thing I did was, of course, restart the computer, but this did not bring any results. Then, I decided that I should try to restore the system to an earlier state, but as it turned out, when I tried to start a system restore, this message was again displayed in front of me.

But due to the fact that I have a second account on my computer, I switched to it to check if there was such a problem there. After loading, I launched the browser, the normal page loading began, which means that here ( on this account), Everything is fine. And the way everything works here, this means that by creating a new account the problem will disappear, but this solution to the “Interface is not supported” error did not work for me, since my profile has a lot of different programs in which a lot of important information is stored. information for me. Therefore, I started looking on the Internet for tips and recommendations that could help me get rid of this problem.

Looking ahead, I will say that I succeeded, but at the same time, I tried a lot of different options, and only a few turned out to be really sensible. Therefore, now I will share with you some tips that really helped me get rid of the “Interface is not supported” error.

Fixing the "Interface not supported" error

1. The first method is the simplest and most convenient. This method is simple in that you only need to download the Fix file already prepared by Microsoft and install it on your computer. But the downside of this option is that this fix is ​​only compatible with Windows 7 and 8.1.

And just like me, I received a notification that this operating system is not supported, so I continued my search. ( For those who have Windows 10, go straight to the second point, but if you have seven then read on).

Here is the link to download this file. All you have to do is install it and restart your computer when finished.

Download the archive from this link to any folder on your computer and unpack it. Next, run the file “ interfacenotsupportedfix.bat", We wait for the process to complete and reboot the computer.

Now, download the following archive, which contains the registry file. By running it, we will restore the association of exe files. Afterwards, as before, do not forget to restart the computer to apply all the changes.

Personally, for me, everything worked only after executing both files, but for many it was enough to just run the first batch file and reboot the computer. So try it, test it, and be sure to share your results in the comments.

3. And finally, the third option is to create a new user. If nothing helps you with the words described above and the “Interface is not supported” error still appears, then the one hundred percent solution is to create a new account.

To do this, right-click on the computer and select “”.

In the window that opens, indicate the name of the new account and, if desired, a password. Also, don’t forget to uncheck the “ Require password change", and click "Create".

That's all, after restarting the computer you can boot from the new account. After transferring the data, if you wish, you can remove it in the same “Users” menu, where, having selected an unnecessary account, delete it with the “DEL” key or using the “Delete” item.

These are the methods that seemed to me to really work. Be sure to try to do everything one by one and you will definitely get rid of the “” error. In any case, if anything, leave a comment, and as always, I will try to figure it out and help solve your problem.

“Interface not supported”, how to get rid of it?