What to do if the computer freezes and does not respond to anything, how to turn off or reboot the PC. How to forcefully terminate a hung service? How to force shutdown your computer

My practice shows that not all users know Features of turning on, rebooting and shutting down the computer. In the sixth IT lesson we will deal with these simple but important points.

It would seem that what could be simpler than turning the computer on and off? But small errors may lead to serious consequences: data loss, boot problems and even failure of some devices. To help avoid such difficulties, this IT lesson was written.

Connecting your computer to the electrical network

That lesson describes surge protectors and uninterruptible power supplies (UPS). Without this information, completing today's IT lesson will be somewhat more difficult.

If we understand the addition, let's move on to the main topic of our lesson today.

Turning on the computer

Let's start with the simplest thing - turning on the computer.

If you use a surge protector and/or a UPS, the turn-on order may be as follows:

Button on surge protector;
Button on ();
Button on power supply(usually it is not turned off, but it’s better to check it the first time you turn it on and not turn it off in the future);
Power button on the monitor (I don’t turn off the monitor, because it turns off along with the UPS or filter);
Short press (about 1 second) power buttons on the front panel system unit(about the location of the button in the IT lesson).

Note: Some computers require you to press the power button twice in a row when you turn them on for the first time.

Was it difficult? “As many as five points!” In fact, the process is usually reduced to two or three steps.

In a simple daily version, turning on my computer looks like this:

Power button on surge protector(if installed);
Power button on uninterruptible power supply(if installed);
Short press power buttons(about 1 second) on the front panel system unit.

If the computer was turned off for a short time without turning off the filter and the UPS, then naturally only the third item from the list remains (one short press on the power button of the system unit).

Turning off the computer

1. Normal computer shutdown

There are two ways to turn off a running computer:

1. In the operating system (Windows), press the button "Start"(lower left corner on the screen), then the button "Shutdown";

(in Windows XP press the button "Start", then "Shutdown", and again "Shutdown");

2. Short press(less than one second) power buttons on the system unit.

Take your time, wait, maybe the computer is not frozen, but is busy processing data, this can be indicated by a flashing red indicator.

Wait a while (one to three minutes), if after that the computer does not begin to respond to key presses, then only in this case use a forced reboot or shutdown.

Let's finish today's lesson with these important rules.

Copying prohibited

Announcement

There are two more modes of computer operation: standby and sleep mode, but we will talk about them at Level 2 “User”.

In the next lesson, we’ll look at and find out which components most influence performance computer.

Our article is devoted to situations when computer games for PCs or smartphones freeze. Surely each of our readers has encountered a similar unpleasant situation and it was not always possible to close a frozen game without rebooting. Let's look at ways to solve such problems!

How can you tell if the game is frozen?

In fact, this is quite simple, since computer games often freeze. They do this at the moment of start, at the moment of loading the main menu, at the moment of loading the game world, and during the gameplay too - the screen darkens, the sound in the game disappears or loops, it simply does not respond to clicks or other actions of yours. Let's see how to get out of this situation.

How to close the game if it freezes?

First, two simple rules about what not to do. Firstly, you should not immediately press the “reboot” button or turn off the power to the PC - more on this below. Secondly, there is no need to run this game again or launch other programs - this will only make the situation worse.

What you need to do is try to close the frozen game and save the computer's working state in order to save possible data from other programs and calmly restart the computer. Modern Windows operating systems have already learned to recognize the game freezing and can close it independently, displaying the following message:

However, sometimes it does not pop up on top of the “failed” application, so you will have to switch to it using the Alt+Tab combination. In other cases, you will have to close the game yourself

In most situations, the tips we have outlined below will allow you to safely close any game. In some cases, the freeze is so severe that the mouse and/or keyboard operate with a long delay. In this case, you will have to take into account the system reaction time and act patiently.

If they don’t work at all and you can’t “get through” to the computer, you will have to act harshly - the very last method, which can only be used in cases where the computer does not respond to your commands at all.

This method will allow you to close a frozen game - you need to click on the “Restart” button of your computer’s system unit or turn off the power and then turn it on again. This hard restart of the computer can harm the hardware, the stability of the operating system and other programs, but it is not always possible to close the game using the methods described below.

How to close the game using the keyboard and key combinations

If you determine that the keyboard is working, then there are several possible options for closing the game. First, try doing this using the Alt+F4 key combination. In a number of older games (pre-2005 release), the Ctrl+Break combination will help.

You can try switching to the desktop using the Win+D combination (minimize all windows) or switching to another application using Alt+Tab. Now you need to see if the taskbar is visible at the bottom of the screen (or where the “Start” button is) and try to close the application by right-clicking on the corresponding icon in the taskbar and selecting “Close window”.

This method allows you to close the game without the “Task Manager”, but it only works in 30% of cases. If this does not help, you will have to call the “Task Manager”. In Windows XP, the key combination Ctrl+Alt+Delete is intended for this; in newer versions of Windows, like Windows 7 / 8.1 or 10, you need to use the combination Ctrl+Shift+Esc.

How to close a game using task manager

The Task Manager window that appears will usually offer the Applications menu first. A frozen game can be removed in this menu, but it is better to immediately remove the process through the next “Processes” menu. In some cases, the mouse will not work, so use Tab switching to select a line of work menus (the current active menu will be highlighted with a square), and then use the arrows to first go to the desired menu, and then select the process you are looking for.

Now you need to click the Delete button, or select the desired process with the right mouse button and click “End process”. After these actions, 1 to 10 seconds will pass, after which the system should remove the frozen application or game.

Occasionally, to obtain a list of all involved processes, you may need to activate the “Display processes of all users” menu.

Similar actions can be carried out using an alternative program of the standard “Task Manager”, which is called Process Explorer. You will have to perform similar actions.

How to close a game on Steam

This problem is faced by fans of online games launched through specialized launchers and distributed through Steam. The situation can be paradoxical - Steam shows that you are still in the game, while you left it a long time ago and have already forgotten to think. Because of this, it is impossible to either close Steam or launch another game. What should I do?

First, you need to see if the launcher of this game is closed, and you need to check not only in the “Taskbar”, but also in the “Task Manager”. Look to see if the process of the game or its launcher is hanging; if you find anything, close it immediately.

In addition, this problem occurs due to the fault of the Steam client itself, for example, it may occur after the next update. Try to wait for the next update - they come out almost weekly. Check to see if the overlay mode (SteamOverlay.exe) is enabled, which may also be responsible for causing this crash.

If all else fails, you will have to kill the Steam.exe process in the Task Manager.

How to close a game on Windows 8/8.1/10

The latest versions of Windows are focused on the touch capabilities of new computers. Therefore, Windows 8 owners often cannot understand how to close this or that application.

To do this, you need to “hook” the upper part of it with the mouse and drag it to the lower part of the screen. This action can also be done with your finger by “dragging” the application down, and it will first decrease in size, and if you continue to move your finger to the bottom of the screen, then it will close.

In addition to the standard and described above options, there is one more. You need to call up the application panel, which opens in Windows 8 from the upper left corner by moving the mouse down. You need to right-click on the desired application and select the “Close” menu item.

How to close a game while multitasking

Owners of the latest smartphones from Apple face this problem. The iPhone 5S and the iOS 7 operating system introduced full multitasking, allowing the smartphone to keep more than one application in memory without stopping those applications that are in the background. However, with this innovation, Apple device users have found that the iPhone battery drains quickly due to the heavy load on the smartphone, since the OS does not strive to free up memory and processor.

Despite the “swipe up” gesture, which should close unnecessary applications or games, they could remain running in the background. Therefore, for owners of jailbroken iPhones who have updated to the new version, several different unofficial applications have been released for cleaning RAM and closing games in multitasking mode. Such applications include Clear Background Apps, SwitchSpring, Slide2kill, KillApp7 and others.

Developers from Apple declare that the iOS operating system independently monitors the consumption of RAM and closes inactive applications and games as these resources are needed for other applications and games, so use the applications we have indicated at your own peril and risk!

Every computer user has encountered how to close a frozen program. This situation occurs quite often when working on a computer.

While working on a computer, it happens that some program does not respond to user commands. The program does not respond to the mouse or keyboard, a window appears with the inscription “the program is not responding.”

How to close a frozen program? Some users immediately press the “Reset” button, which is located on the front panel of the computer. After this, the Windows operating system restarts.

But this is not recommended. A reboot may negatively affect the operation of the operating system or individual programs running at that moment. After a new launch, errors may appear in the program that was running at the time of sudden shutdown.

If defragmentation occurred at the time of the reboot, then files that were being processed at that time may be damaged due to the reboot. And if these were some system files, then problems with the operating system may begin.

If problems with the operating system have already begun, then one of the ways out will be until it is operational.

What to do if the program does not respond?

Let's look at the easiest case first. The program is frozen and does not respond to computer user commands. You need to disable the frozen program; to do this, you need to launch the “Task Manager” by simultaneously pressing the “Ctrl” + “Alt” + “Del” keys on the keyboard in the Windows XP operating system.

In the operating systems Windows 7, Windows 8.1, Windows 10, after pressing these keys, in a new window of the operating system, in the open menu, you will need to select the “Start task manager” item at the very bottom, or simultaneously press the keyboard shortcut “Ctrl” + "Shift" + "Esc".

In the Windows operating system, there is a more convenient way to launch the “Task Manager” - right-click on the “Taskbar”, and then select “Run Task Manager” from the context menu (In Windows XP, Windows 8.1, Windows 10 - “Task Manager ").

In the “Task Manager” window that opens, go to the “Applications” tab. Usually, opposite the name of the frozen program, in the “Status” column the inscription “Not responding” will be visible.

Next, select the frozen program, and then click on the “End task” button, or select the “End task” item in the context menu after right-clicking the mouse. In the warning window, agree to complete the process.

After some time, the frozen application will shut down. If this does not happen, go to the “Processes” tab.

Attention! You will need to be careful with this tab. Don't look for a hung process unless you know the name of the process!

In the Applications tab, select the frozen program, and then right-click on it and select Go to Process.

Task Manager will automatically switch you to the Processes tab and highlight the frozen application.

After that, click the “End process” button, or select “End process” in the context menu by right-clicking the mouse.

If the hung program is not displayed in the “Applications” tab, then you need to go to the “Processes” tab yourself, find the process of the frozen program and disable it, if you can find this process correctly. If you don’t know the name of the process, then it’s better not to do anything in this tab!

If these steps do not help, then go to the “Users” tab, click on the “Log out” button, or after right-clicking, select “Log off” from the context menu.

You will have to wait a while until the system completes all processes, and then an operating system window with your account icon will appear on your monitor. Click on this icon, and then log back into the operating system to continue working.

Similar actions can be performed using the Start menu, if you have access to the menu. In the Start menu, hover your mouse over the Shut Down button, and then select Sign Out from the pop-up context menu.

Restarting Explorer

One way to “revive” Windows is to restart Explorer. Windows Explorer is not only a file manager; in the operating system it is responsible, among other things, for displaying the Desktop and the Taskbar.

First, launch the Task Manager using the “Ctrl” + “Shift” + “Esc” keys. Then go to the “Processes” tab, then click on the “Image name” button, and then click on the “E” button (in the Latin keyboard layout).

The "explorer.exe" process will be highlighted. Terminate this process using the “End Process” button or from the context menu.

After this, Explorer will complete its work, and all icons will disappear from the monitor screen. In the Task Manager, go to the “File” menu, and in the context menu select “New task (Run...)”.

In the “Create a new task” window, enter “explorer” in the input field, and then click on the “OK” button.

After this, the operating system should work normally.

Removing a hung process from the command line

Run Command Prompt as Administrator. In the command line interpreter, enter the command: “tasklist” (without quotes), and then press the “Enter” key.

You will see a list of all processes running in the operating system. Next to each application name, its “PID” and the amount of memory consumed are displayed.

Remember the “PID” (numbers) of the frozen application that you need to disable. In the command line interpreter window, enter a new command: “taskkill/pid...” (without quotes). Instead of "..." after PID, insert the value that you remember. Then press the "Enter" key. The hung application will be closed.

other methods

The most difficult case is when some program or game that was deployed to fill the entire monitor screen freezes. In this case, you will not have access to the Desktop, the Task Manager, or the Start menu.

In this case, try exiting the window with the frozen program to the “Desktop” using the keys on the keyboard.

Press the keyboard keys “Alt” + “F4”. This key combination in the Windows operating system is used to close applications.

You can try pressing the “Esc” or “Enter” keys on your keyboard; perhaps, in some cases, you will be able to access the Desktop.

When you press the “Windows” key, you can also sometimes get to the Desktop when the program is frozen.

Try pressing the function keys “F1” - “F12” on your keyboard. In some cases, pressing these keys will open the Desktop. Which specific function key can help depends on the specific computer; it varies from computer to computer.

If the Desktop has opened, then to exit the frozen application, follow the steps described above in this article.

But, there are situations when the computer does not respond to any user actions. The mouse does not work, the computer does not respond to keystrokes on the keyboard. In this case, rebooting the operating system can no longer be avoided. Then you will have to click on the "Reset" button.

Conclusions of the article

If the program freezes. does not respond to user actions, try to shut down the frozen application without rebooting the operating system.

To ensure long-term uninterrupted operation of any computer, be it a home desktop PC or laptop, it is necessary to shut it down correctly. Many novice users neglect this point, not knowing or forgetting that incorrect actions at this stage can lead to the loss of working information. And over time, it threatens to require reinstalling the operating system. Not to mention the hardware failure of your PC. This happens quite rarely, but such a risk cannot be completely eliminated.

The shutdown procedure is very simple and can be done in several ways. Let's look into the details.

Do I need to turn off my computer?

You may think: why doesn’t someone turn it off? Yes, and there may be several reasons:

the computer is sent to sleep or hibernation mode rather than turned off;
the computer is simply not turned off so as not to waste time turning it on;
The computer is not turned off at night so that movies or other files can be downloaded at night.

However, there are plenty of objective reasons for switching off. Below are just a few of them:

A working modern computer is a rather “gluttonous” device in terms of energy consumption. Therefore, its aimless operation leads to a significant increase in the monthly electricity bill.
The slight noise of the coolers of a working system unit, as well as the burning indicators of the system blog at night can interfere with restful sleep (if the computer is in the bedroom). Therefore, it is better not to download large files (torrents, movies) at night.
It is undesirable to leave electrical appliances turned on in a house, apartment or office when no one is there.
Long-term continuous operation of the computer reduces the service life of the equipment.
All components of the system unit located in it are installed only with the power off. These are RAM modules, sound cards, processor, most hard drives, etc. We understood the detailed structure of the system unit. Therefore, if you need to install an additional module in the system unit, the computer will need to be turned off.

Forced shutdown of the computer

Constantly using the methods described below to turn off the computer is extremely contraindicated for the “health” of the computer. However, many novice users, due to ignorance of the correct ways to handle computer equipment, abuse this method of turning off the computer, and then wonder why their computer does not start.

Unplug the cord from the outlet... Caution!!!

The usual action of pulling the plug of an electrical appliance from the socket is not applicable to a computer. No, of course, you can experiment...

But I can’t vouch for the continued normal functioning of the device!

The fact is that during operation, all the necessary data from operating system programs (you can find out what an operating system is and why it is needed at all) and documents are stored in the computer’s RAM. The hard drive is primarily used for persistent storage, and the correct steps must be taken to write data to it when it is turned off.

A sudden shutdown “from the socket” is an emergency option for stopping the computer, in which system files may be damaged, which will not allow the computer to start the next time.

Imagine that you are thinking about an important task and suddenly fall asleep! About the same effect will happen with a computer.

Similar consequences can occur if the uninterruptible power supply suddenly turns off. If you are not yet “familiar” with this life-saving device, then let’s briefly understand its purpose.

An uninterruptible power supply (aka UPS) can provide continuous power to your computer in the event of a sudden loss of electrical current in the network. Usually, it is not intended for long-term work, but only allows you to correctly save all open documents, close programs and turn off the computer within a few minutes. All working data will not be lost.

By the way, computer literacy tests often include the following question: “When you turn off the computer, all information is erased in...”

Answer: in RAM. Everything is saved on the hard drive.

Forcing the computer to shut down using the power button

You can turn off a frozen computer (which does not respond to keyboard or mouse presses) by pressing the power button (also known as the power button) on the system unit and holding it down. Shutdown will occur after approximately 3-4 seconds of holding the button pressed.

It is also undesirable to abuse this method, since this shutdown option is an emergency and can damage system files and lead to the loss of information important to you.

I use it only when the computer is really hopelessly frozen and does not respond to any actions for 15-20 minutes.

Therefore, I once again draw your attention!

Turning off the computer by unplugging the power cord, pulling the power cord, or uninterruptible power supply (UPS) button without shutting down the operating system correctly will result in the loss of all unsaved data and, over time, the operating system will no longer function normally.

Modern operating systems will warn you about open programs before shutting down your computer.

Properly shutting down your computer

Preparation before shutdown

To ensure the safety of open documents and files that you directly worked with, before turning off the computer, you must perform a number of actions:

save the results of your work in open programs;
remove the disk from the drive, if it is there;
close running applications/programs;
give a command to turn off the computer using one of the methods that we will discuss below.

How to turn off your computer in Windows 7 via the Start menu.

Click on the button. It's located in the Start menu:

If there are open programs and unsaved documents, after clicking the button, the system will issue a warning asking you to close the programs.

If unsaved documents are not important to you, then you can speed up the shutdown process by clicking on the “Force shutdown” button.

If the documents are important, click the “Cancel” button, save the documents and close the programs and again click on “Shut down” in the “Start” menu

Next, wait until the system unit turns off (the screen will go dark, the system unit will stop buzzing, and the system unit’s power indicator will go out). After which you can turn off the UPS (uninterruptible power supply), if available, or the power strip key.
By the way, to protect your computer, another useful acquisition can be a surge protector (), just don’t confuse it with a simple extension cord!

How to turn off your computer in Windows 8 via the Start menu

To turn off your computer in Windows 8, just click on the start button (usually in the lower left corner of the Desktop). And then click on the computer shutdown icon in the upper right corner of the window.

From the menu that opens, select “Shut down.”

We wait for the system unit to turn off and turn off the power by unplugging it from the outlet or using the surge protector button or on the UPS.

Alternative options

Method 1 - start shutdown by briefly pressing the shutdown button

You can turn off your desktop computer by briefly pressing the power button on the system unit. Further actions in the case of open programs are similar to the steps described above.

If there are none, the computer will turn off automatically.

A short press on the computer's power button will begin the shutdown process (equivalent to selecting the Shutdown option in Windows, as described above).

Method 2 - How to turn off your computer using the keyboard

While on the Desktop, press the key combination “Alt+F4”. A shutdown window appears.

Click the “Ok” button. We wait for the system unit to turn off and turn it off

Turn off the laptop

When turning off the laptop, the methods discussed above are available, but there is an easier way. You simply close its lid. It automatically goes into “sleep” mode, and in case of further prolonged “rest” it will automatically turn off, saving everything stored in RAM to the hard drive. When you turn on the computer again, all data will be restored to the state it was when you closed the laptop lid. This is the default behavior of the laptop, however, it can be changed.

Be careful, your laptop may behave differently when closing the lid!

The behavior of the laptop when the lid is closed can be customized and we will talk about this in a separate article.

Automatic computer shutdown according to schedule (timer)

In your daily interactions with your computer, you may need to turn it off while you are away. For example, the process of copying a CD or defragmenting a hard drive, or processing a video file takes a long time, and you need to go away or just go to bed. How to optimally organize the computer shutdown in this case?

There are several options:

Some programs have a designed function to automatically turn off the computer after completing assigned tasks (for example, uTorrent, Download Master);
standard Windows tools allow you to configure shutdown automatically by time;
There are third-party programs to automatically shut down your computer.

If you are still wondering what computer programs are, read.

As part of our “dialogue”, we will only consider using the standard “Task Scheduler” of the Windows system to organize the daily shutdown of the computer at a certain time of day. This is convenient, for example, for turning off the computer in the evening or at the end of the working day without your participation.

To start working with this program, go to the “Start” menu -> “Accessories” -> “Utilities”, select “Task Scheduler”.

We left-click on it and in the window that appears, select “Create a simple task...”

We call it arbitrarily, but it is clear to us, the planned action. Click the “Next” button...

We define the task trigger, that is, we set the mode of its execution.

Let's specify the time parameters.

In the next window we determine the required action. We are interested in “Running programs”.

We indicate the command to be executed and its additional parameters.

In the next window, after checking the entered data and clicking the “Finish” button, we will create a new task for the system.

Double-clicking with the left mouse button on it will open the task properties for editing.

We are very sorry that you did not like the article!

Help us improve it!

Send reply

Thanks for your feedback!

Sooner or later, many users have a question about how to close a program if it does not close. In fact, the topic is not so simple. After all, frozen applications are a huge problem for users. They not only load the operating system and processor, but also interfere with normal operation of the computer. The following will provide the best tips and recommendations for what to do if you cannot close an application.

How to determine if a program is frozen

Before racking their brains for an answer to the question of how to close a program if it won't close, the user must understand whether the application is truly frozen. It is likely that the computer's performance leaves much to be desired, and the "close" command simply takes a long time to process.

Typically, if an application is frozen, it will stop responding to user input, the cursor will turn into either an hourglass or a small circle (depending on the operating system), and the application title will read “Not responding.” At the same time, all attempts to complete work with the program in the usual way (by clicking on the cross in the upper right corner of the screen) do not produce results. Also, when you click on the working area of the program, the screen becomes “covered in fog.” All these are signs of freezing. How can I close a program if it won't close? The best tips and tricks will be presented below.

Expectation

The first advice is to wait a little. Don't forget that a computer has a certain power. When the processor and RAM are loaded, the operating speed of the OS decreases. And it takes longer to process the transaction.

Accordingly, you will have to wait a little. When the computer takes a long time to respond to actions performed in the program, all signs of freezing are observed. The waiting period should not exceed 5-10 minutes. If after this time there are no responses to user actions, you can proceed to other shutdown methods.

Method 1: Hotkeys

So, it turned out that the program is not responding. How to close a frozen program? If waiting does not produce results, the user must choose one course of action or another. You can press some keys on the keyboard, as well as their combinations.

When the program freezes, you are prompted to click on:

Ctrl+W
Alt+F4.

These combinations contribute to the emergency closure of many frozen programs. Not the most effective, but a valid method. But this is just the beginning. There are several more options.

Method 2: through the menu

How can I close a program if it won't close? The following trick works more often than a keyboard shortcut. Users use it in practice with noticeable success. To close a frozen application, you can call up the program action menu, and then select the appropriate function there.

To do this you need:

Place the cursor over the program window on the taskbar.
Right-click on the appropriate application.
In the menu that appears, select "Close window". If the system issues a warning, agree with it.
Wait a while.

As a rule, after the actions taken, the program closes on its own after 10-15 seconds. If this method does not help, no need to panic. You can try using other methods. Luckily, Windows provides quite a few ways to close applications.

Method 3: Task Manager

Which ones exactly? How can you close a program if it freezes? When the listed methods do not produce results, the user is asked to act somewhat differently. For example, call the task manager, and then end the process launched by a particular program.

This method is the most effective. It allows you to urgently close almost any program. Doesn't work only in some cases. Therefore, users often prefer it.

How to close a program that is frozen or unresponsive? This requires:

Press the key combination Ctrl + Alt + Del. Or Ctrl + Shift + Esc will do.
Select "Task Manager" in the window that appears. If you used a combination with "Shift", you can skip this step. The corresponding service will open immediately.
Go to the "Applications" tab.
Select the frozen program and click on the “End task” or “End task” button.
Accept the operating system warning (if it is issued), and then wait a bit.

As a rule, after 5-15 seconds the program will be closed urgently. In some cases, it is suggested to send a message about the error of the corresponding application. This method can be improved a little. To do this, go to the "Processes" tab in the "Task Manager", then select the name of the process that is being executed by the frozen program, and click on "End". This will close the application approximately 99% of the time.

Method 4: additional programs

In some situations, additional software helps. Some processes are terminated forcibly only with their help. Not the most common, but an effective solution to the problem. How to close a program that has frozen? The user must download and install a special additional application to search for processes running on the computer, and then repeat the same steps as in the Task Manager. Process Explorer is perfect for this idea.

How can I close a program if it won't close? The user will have to:

Download Process Explorer for yourself.
Run the program. The application does not require installation, which makes users very happy.
Find the desired program/process in the list on the left side of the screen.
Select it by right-clicking on the corresponding line.
In the menu that appears, perform the “Kill” operation.

After this, the application will be closed on an emergency basis. The advantage of using the program is that it displays processes and programs hidden from the standard Task Manager.

Method 5: radical approach

How can you close a program if it freezes? The next method is radical. There is no need to rush with it, even though it is considered the simplest. The thing is that to successfully complete programs, you need... a reboot of the operating system.

Skype won't close? How to close it? Exactly the same as all other applications. First, try all the methods listed earlier. If they do not help, then the user has no choice but to restart the computer.

It is not recommended to use Start. After all, frozen programs sometimes interfere with the corresponding operation. Instead, you need to find the Reset button on your computer and click on it. This is an emergency reboot. This option works on desktop computers. It is recommended to save all data in other applications before using it. In addition, it is worth considering that constantly restarting the computer does not have the best effect on the performance of the device.

Method 6: for laptops

Now it’s clear how to close a program that has frozen. The user could easily familiarize himself with examples of actions in a particular case. Detailed instructions will help you solve the problem.

What to do if all the previously listed methods do not help, and the person is working not at a desktop computer, but at a laptop? Or if for a number of reasons the operating system refuses to reboot even after pressing Reset?

In this case, you need to urgently shut down the operating system. But before that, save all the data on your computer. Next, press the power button on the laptop (or computer) and hold it for about 5-10 seconds. The operating system will shut down. Then you can turn on the computer and continue working with it.

The disadvantage of this method of action is its danger to the device. Frequent emergency shutdowns lead to operating system failures and hardware malfunctions. This step will not solve the problem with programs freezing. Therefore, you can use it only as a last resort.

The reader should already understand how to force close a program on Windows. All of the above methods help to bring your idea to life without much difficulty. What tips will help you avoid app freezing next time?

The most common recommendations among them are:

Make sure that it is the program that has frozen, and not the computer. The list of actions in one case or another will be different. Most often, when your computer freezes, an emergency reboot or shutdown helps.
Scan your computer for viruses. Treat it if necessary.
Reinstall a frozen program. Sometimes this method helps very effectively.
Do not open many programs and applications when working with problematic software. The less the processor is loaded, the faster certain operations will be performed on it.
Learn to wait. As already mentioned, sometimes processes simply take a long time to process. And so it begins to seem that the computer program has frozen.
Try all the listed methods. It is recommended to postpone rebooting and shutting down the computer as a last resort.

That's all. In fact, there is nothing difficult about ending a stuck program. All of these methods are successfully used by PC users to varying degrees.