The camera takes poor photographs: possible malfunctions of modern cameras. Cloudy camera on iPhone Why the front camera became cloudy

Why has the camera on Android become worse?

There may be several options, here you just need to thoroughly polish the camera from dust and dirt, dust often gets under the protective glass, look at the settings, maybe they have gone wrong and now the shooting is not at the highest quality.

Unfortunately, there are no clarifications, maybe you recently installed an update and this was the reason bad work cameras. The initial step to eliminate haze and blurriness in pictures is to inspect whether there is an anti-reflective coating and remove it, if there is one, and carefully wipe the camera lens.

Well, if there were updates, then many give advice to roll back the firmware and try to flash it again, although many object to this that this is impossible to do on some systems.

And you can also check the camera chip or before starting, try to see how the camera will work with another application.

Check your camera settings, they may be wrong. I had this happen when, in addition to my native camera, I also downloaded a camera app and apparently accidentally swapped my camera for the app, and the pictures turned out worse. The camera lens may be dirty or scratched.

The reason may simply be a dirty lens; here you need to wipe it with a cloth and you’re done. Or the lens is damaged or scratched, in which case you will have to replace it. Insufficient memory can automatically set the camera settings to shoot in poor quality, so check the settings.

In addition to the visually visible reasons, these are cracks on the glass or scratches, there may be some other reasons.

For example, I took photographs on mine and when viewing it I saw pixels (squares) on the screen and it turned out that the memory of the phone itself was clogged, after transferring all the files to the memory card and deleting the unnecessary ones, it turned out that the camera took pictures perfectly as before. It turns out when insufficient memory the image may be of poor quality.

Well, of course, you should also look at the settings, don’t rule it out.

Besides the fact that you were simply unlucky with your phone, the reasons may be quite simple, seemingly solvable, but not always if the camera, or rather its lens, is cracked.

The most common and solvable reason is contamination of the camera lens, which can only be cleaned with a special napkin or cotton wool.

Another reason is a program failure or night shooting mode.

Also possible reason There may also be insufficient memory due to frequent shooting; to eliminate this reason, you will only need to delete old photos or videos, then check by doing a test shooting of a short video.

I don’t recommend flashing your phone; it definitely won’t give the desired result.

The most common option is damage to the surface of the camera lens or contamination. If it gets dirty, everything is simple - wipe it with a glasses cloth and that’s it. If it is scratched, you can try polishing it with GOI paste. Another option is that the camera settings have been reset and it is shooting in the wrong mode. There may also be burnout of the matrix - well, there’s nothing you can do about it - just change it.

The first thing that comes to mind is something with the camera lens.

It may simply be stained, then it should be wiped with a special napkin, or it may be scratched with large or micro scratches, then this is just a lens replacement.

If all these problems have passed you by, then the problem is in the software (although this is extremely rare), try downloading an update or checking your software on your phone. You can also try resetting everything to factory settings. If all this does not help, then feel free to contact the service center, they will definitely help you.

I didn’t pay attention to the fact that the camera on Android became worse at shooting. On the contrary, cameras on new smartphones and tablets are only getting better.

If we are talking about a device that is no longer new, then perhaps it is something with the system or firmware... Or the camera lens is simply dirty.

There are several options here:

1. The camera is dirty or scratched. Check it and wipe it with a soft cloth.
2. If you recently installed any software, it could affect the quality of your shooting.
3. The settings have gone wrong. Reset settings to factory defaults.

• Most likely the camera lens began to mope. If there is dirt on the surface, then there are special wipes for wiping. If the scratches are large or micro, then you can’t do without replacing the lens.

This material contains the most interesting tricks, thanks to which you can realize the hidden potential of the camera on your smartphone.

Yes, yes, exactly superzoom on a smartphone. Not only long-lens DSLRs and ultrasonic point-and-shoot cameras are capable of photographing objects located at long distances. If you have binoculars, or better yet, a telescope, place the camera's eye on the eyepiece lens, adjust the position of the equipment to achieve maximum image sharpness, and start shooting photos or videos.

Of course, it is better to use wide-angle optics: then the viewing angle will be larger, and the frames around the lenses will not be visible through the lens. If you use a telescope on a tripod, it would be a good idea to also fix your smartphone for convenience.

Macro lens using a magnifying glass

You don't need expensive equipment to take detailed macro photos. Any affordable way We attach a regular magnifying glass to the body of the smartphone within the radius of the lens, and the device for macro photography is ready. The greater the magnification lens magnification, the stronger the approximation, and the higher the detail of the resulting image.

Shooting “almost underwater”

You've probably seen more than once spectacular photographs taken with a camera half submerged in water. If your smartphone does not have waterproof properties, a similar effect can be achieved by placing the mobile device with the camera facing down in a glass or any other transparent, moisture-proof container. All that's left to do is to carefully and partially immerse the container with the smartphone in the pond, and press the shutter button.

Looking at infrared radiation

We won’t go into technical details, we’ll just state a fact: infrared light, invisible to the human eye, can be seen on a smartphone display using a camera. Point the lens at the remote control where the IR diode is located and press its buttons. The small luminous point is IR radiation.

Shooting using the volume key

Did you know that the vast majority of smartphones have the ability to take a photo by pressing the volume key? Try it yourself, you don’t have to press the touch “shutter button” at all. If it doesn’t work, go to the settings, this function may need to be activated. It is especially convenient to use the hardware key when taking selfies.

Digitization of film photos

If you have old films and you are curious to view their contents, all you have to do is select the “Negative” color effect in the camera settings and photograph the frame on the film. For the same purpose, you can use a special application, Helmut, for example. This method will not replace professional digitization, however, it is quite suitable for informational purposes.

Panoramic tricks

Fans of panoramic shots will definitely love these tricks. Make several virtual “clones” of yourself in the photo, without using graphic editors- as easy as pie. Panoramas on mobile devices are created using automatic gluing of successive frames. It is enough to move after each frame to a new location, running around behind the operator, in the opposite direction from the moving lens. It is necessary to move the camera slowly enough so that the person has time to take the place of the next “clone”.

An interesting effect can be achieved during fast movement. While on a train or car, activate panoramic photography. This way you can significantly increase the photographic area.

Jelly effect

Used in smartphones different types matrices: CCD or CMOS. The CMOS matrix has such a feature - during shooting, with sudden and rapid movements of the subject being photographed, the image may be distorted, resulting in the so-called “jelly effect”. This is a rather unpleasant phenomenon, however, enthusiasts perceive this effect as a special feature. This video clearly demonstrates the difference between CMOS and CCD matrices. Guitar strings create vibrations, although in fact this is just an illusion. If your smartphone has a CMOS sensor, you can achieve a similar effect, or experiment with something different.

Pulse measurement

In order to measure your heart rate, you need to install and open a special application (Cardiograph and the like), which will launch the camera. Next, you need to place your finger on the lens and point it towards a sufficiently strong light source (for example, a lamp, or use the built-in flash).

Surely, the reader thinks that this is science fiction, or just a useless thing, invented for fun. But that's not true. If all conditions are met, the camera detects fluctuations in the form of changes in skin color due to blood pulsation, and the application produces, although not ideal, a result close to the exact figure.

Demonstration of the heart rate scanner

Find out what's in front of you

Have you seen a painting, but can’t remember which artist is the author? This can help Google app Goggles, which can perform visual search. Go to the app, take a photo of the piece of art. The application recognizes the object using a search engine that digs into its database and gives you the result on the smartphone display. The program can also recognize barcodes and QR codes, product packaging, landmarks, and even text in several languages! True, this “trick” has more to do with merit software, but everything happens with the direct participation of the camera. For now, this opportunity is more of an entertaining nature, because not everything is recognized, and not always the first time. However, the program “learns”, new objects are added to its database, and recognition algorithms are gradually refined and improved. Perhaps in the future this application will help aliens settle down on our planet.

Google Goggles example

You will also like:

Enough a large number of Direct owners of Samsung smartphones, after one week of using the phone of this model, encountered a problem in the form of camera failure. When you enable it, an error occurs. Camera failure on Samsung is quite common, so this factor must be taken into account. Problems with the camera on the mentioned devices will be discussed in more detail below.

In order to prevent camera failure on Samsung, you are given 4 ways to fix this error with your own hands.

Method number 1: data cleaning

This method, like its other analogues, is simple and does not require anything supernatural. It involves cleaning data and releasing internal storage of this camera. The camera failure on the Samsung Grand may be due to its overflow.

The first step in this situation is to restart your smartphone. First of all, you need to turn it off and then turn it on. This procedure simple, and the user can solve it independently.

Next, you need to go to settings, and there you will find the application manager. As you remember, you need to find a camera. Opening this application and we clean up garbage, uninteresting photos and other material.

Next, you need to restart the gadget again and see if the problem with the camera is resolved. If you have decided, then we congratulate you, and if not, then see the next way to solve this problem.

Method No. 2: Cleaning the internal storage

A camera failure on a Samsung is bad, so it’s better to fix this problem as soon as possible. The second method is to clear the internal storage in the Camera application. recovery method. As well as previous method, let's look at all the details step by step.

First of all, you need to turn off your device. Next, you need to press and hold on certain time three buttons on your phone. These buttons are:

• A button that is responsible for turning it on and off.
• A button called Home.
• And the phone volume up button.

When you press these buttons for a few seconds, the phone will present the Android system parameters to your attention.

In order to clean your device, you need to scroll through the lines using the volume buttons. To go down, use the volume down button.

You need to find a line called Wipe cache partition. Next, your task is to restart the device.

If the camera failure on the Samsung Grand Prime has stopped, this is good, but if not, then you should turn to the next method.

Method number 3: file manager

This method also involves cleaning the material, but in a different way. In this case, this method aims to eliminate the camera failure on the Samsung Galaxy and is as follows. We resort to using a file manager.

• The first step is to connect the device to your computer using a USB cable.
• You need to find and open the memory folder of this smartphone, and then go to the “Android” folder. There will be another folder with dates. This is exactly what you need.
• There you can find the archive folder, where your smartphone’s cache will be stored. You will need to remove it.
• Experts in this matter advise deleting all files from this folder, since they are completely useless on your device and only cause memory problems.
• After you complete your action, you need to restart your device. We hope this method helped you troubleshoot, if not, then move on to the last method.

Method number 4: removing an alternative camera

This is the last way that can help you prevent camera failure on Samsung.

This method also involves removing it, but this time the so-called alternative camera is removed.

Your task is to find all the applications that use the camera services, and once you find them, your task will be to remove them. After this action, be sure to restart the smartphone.

One of the above methods will certainly fix the problem with the camera, and it will continue to perform its job efficiently. If nothing helps, you must definitely contact a service center - this means the problem is much more serious.

Despite high quality technology from Apple, for some reasons there may be malfunctions. This could be a simple device defect, a software glitch, or mechanical damage. In most cases, this problem can be solved.

One of the most problematic areas of the iPhone is the camera. Often users leave reviews that the camera does not work properly and the pictures turn out blurry. It is worth finding out the reasons and ways to solve such problems.

How to identify problems with the camera?

With every new one iPhone model The manufacturer is improving the camera's characteristics, but there are a number of cases where, for certain reasons, the operation of this element does not meet the user's expectations, so the camera takes poor pictures. Among the most common problems are the following:

• the camera is blurry and you can’t take a clear shot;
• dark or light spots appear in the photographs;
• there are chromatic aberrations and other defects in photographs;
• violation of the orientation of the images;
• dark screen when the camera is working.

These problems do not necessarily indicate a technical problem.

Reasons for the appearance of cloudy images

Blurry photos taken on an iPhone can upset even an optimist. No one expects the pictures to be Bad quality when purchasing a new device model from of this manufacturer. The causes of this defect are often related to incorrect work autofocus

The problem may occur with every snapshot or occur periodically. Autofocus controls both smartphone cameras. Among the reasons leading to autofocus problems are:

• dirty camera lens, small particles getting under the lens;
• autofocus captures the protruding edge of the case;
• the presence of a magnet on the case also leads to focusing failure;
• software settings are set incorrectly;
• failure due to mechanical shock or moisture.

How can you solve the problem with blurry photos yourself?

If most of the reasons that are not technical can be eliminated independently, then in case of a mechanical breakdown you need to contact a service center. Try the following to try to resolve the issue:

• wipe the lens with a microfiber cloth;
• remove the cover;
• manually adjust the focus setting;
• close applications that use the camera;
• free up storage space;
• update your iOS version;
• do a factory reset, saving your data first.

You can also enter on the Apple website serial number device to check if it is in the database of defective copies. If these steps do not help, then contact a specialist.

IN service center Total Apple has it all necessary equipment to solve the autofocus problem within 30 minutes. We use only original parts and provide a 3-year warranty on repairs. Diagnostics are free, and the office is conveniently located in the center of Moscow.