Instructions for setting up wireless routers Asus RT-G32 C1, RT-NXX. Asus router version RT-G32: model description, installation, configuration Installing the asus rt g32 router

The RT G32 router from ASUS is a “classic” budget model. The cost is low, it was sold in almost all digital and home appliance stores. This device is preferred by such large providers in our country as Rostelecom, TTK, Beeline.

Today we will figure out how to configure the ASUS RT G32 router ourselves. But first, let's talk about its features.

Specifications

The Wi-Fi access point of the router we are considering is at the usual frequency of 2.4 GHz. However, for uninterrupted operation of the system, it is best to use the freest communication channel.

Information is encrypted using WEP, WPA and WPA2 technologies. Its receiving speed is 150 Mbit/s, which is, to put it mildly, not a very good indicator.

These are the main technical characteristics of the ASUS RT G32 router, which are useful for the average user to know.

Indicators

The indicators are on the front. It’s easy to understand them:

· power indicator that lights up when the device is turned on;

· WLAN indicator, which lights up when the wireless connection is activated;

· LAN indicators (4 pieces), which light up when the cable is connected;

· WAN indicator, which lights up if the provider has opened access to the line and there is no interference on it;

Connectors

The connectors are on the back. There are also a minimum of them:

· RESERT button, whose function is to reset settings;

· DC connector (round shape), the function of which is to connect a power adapter;

· LAN connectors (4 pieces), the function of which is to connect external devices.

· WAN connector, whose function is to connect a cable;

· WPS button.

Connecting the device

The ASUS RT G32 router is connected using a cable provided by the provider. In order to connect this device, you must:

1. Place the ASUS RT G32 router as far as possible from power outlets.

2. Connect the power adapter: plug – into the DC connector, plug – into the network.

3. Connect the cable to the WAN connector.

4. Connect the Wi-Fi router to the computer.

When purchasing a used system, it is recommended to reset its settings. To do this, press the RESERT button. To make it more convenient, you can use a needle or, for example, a straightened paperclip. The RESERT button must be held for at least 10 seconds.

Setting up the device

The ASUS RT G32 router is configured through a special application. As a rule, it is Russian-language and has a simple interface.

Setting up the ASUS RT G32 router begins by entering the combination of numbers “192.168.1.1” in the browser and pressing the “Enter” key. The specified combination is nothing more than the static IP address of the system. To open ASUS RT settings you will need to enter:

· password;

In both the first and second cases, as a rule, admin is entered.

Setting up the Internet

To set up the Internet, there is a WAN section, which is located on the side. There you will need to clarify the selected connection option:

· dynamic IP.

· static IP;

If you don’t know at all how to configure the ASUS RT G32, in particular, which of the methods listed above to choose, refer to the agreement with the provider and the device’s operating instructions. This information is there.

Setting up the Internet on a device purchased from Rostelecom

1. Select the type of connection. The checkbox is placed opposite PPPoE.

2. Enter your login and password. As noted earlier, this word is admin. If it is not suitable, read the agreement with the provider and the operating instructions for the device.

Setting up the Internet on a device purchased from Beeline

Setting up the RT G32 router from Beeline looks like this:

1. Select the type of connection. The checkbox is placed opposite L2TP.

2. Enter your login and password at tp.internet.beeline.ru.

Setting up Wi-Fi

Wi-Fi is configured in the “Wireless Network” section. There you need to fill in the following fields:

1. SSID – access point name. It must be different from others, otherwise you will not be able to access the network from your smartphone (authentication error).

2. Authentication method. The most effective is WPA2-Personal.

3. WPA key – a password that gets rid of freeloaders. You should choose complex combinations of more than 8 characters in length, including large and small letters and numbers. The password can be changed at any time.

After filling out these fields, check the box next to “Save” and only then close the window.

Setting up iptv

You can configure iptv in the “Additional settings” section. All you need to do there is to select the port to which the set-top box and “Dynamic IP” are connected.

Just like when setting up a wireless connection, apply the changes, otherwise they will not be saved.

Flashing the device router

If after the above steps the router does not work, you can reflash it. By knowing how to do this, you can eliminate hidden errors and improve your productivity levels.

Firmware is a special program. It should be downloaded from the official website of the equipment manufacturer. As for the version, it can be found in the agreement with the provider or the operating instructions for the device, as well as in the web interface - just open it (this information will be at the top).

We find the required firmware version on the ASUS website, download it and install it. Before downloading, you will need to select your operating system. The installation begins by selecting “Administration” and “Firmware Update”. Next, select the firmware version and click “Open” and “Submit”.

Back in 2009, sales of the Asus RT-G32 router started. Setting it up is a fairly simple operation, and a novice computer specialist can handle it. It is precisely its order for different operators that will be given in this material.

Router Niche

By the standards of 2009, the router in question could easily be classified as a mid-level network solution. Now the requirements have changed significantly, and only the most budget devices include the Asus RT-G32, discussed in this article. The setup is, of course, quite simple, and there are no problems with it. The key advantage of this budget router is its cost, which currently amounts to 1000-1200 rubles. Taking into account the fact that this product has already been tested by time and has managed to show itself mainly only on the good side, such a price is completely justified.

Specifications

The Asus RT-G32 boasts typical technical parameters for an entry-level network solution. The WiFi setup in this case is standard, and there is certainly nothing overly complicated about it. The number of wired ports in this device is 5, and all of them are RJ-45. One of them is blue and labeled WAN. The maximum speed in this case can reach 100 Mbit/s. It is to this that the wire is supplied from the network traffic provider. The other four are yellow and labeled LAN1 to LAN4. Local devices of this network are connected to it, which may include game consoles, televisions, computers, laptops and other equipment. As in the previous case, the highest transmission speed is 100 Mbit/s. One round socket is intended for connecting an external power supply. The wireless part of the network is implemented using the Wi-Fi standard. At the hardware level, it is implemented by a single antenna, and the transmission speed in this segment can reach 150 Mbit/s.

First stage of setup: connection

The first step is to fully connect the Asus RT-G32. The settings are identical for all providers. First, you need to connect the power supply to the AC mains and the corresponding socket on the router. Then we connect the cord from the provider and connect it to the port marked WAN. Finally, if necessary, we connect all wired devices of the computer network to the router. Separately, it should be noted that a computer must be connected directly to the router using a twisted pair cable to any LAN port for configuration. Moreover, it can be either a desktop computer or a laptop. After completing the setup, this connection is not required and can be removed with the equipment turned off. In the future, it can be replaced with a more convenient and practical Wi-Fi.

Setup procedure for Beeline

First, let's look at the procedure for setting up the Asus RT-G32 router for the Beeline cable provider. Setting up Beeline requires setting the following parameters:

1. After turning on and finishing loading such components of the computer system as a router and a personal computer, on the latter we launch any browser that is available. In its address bar we type the device address: 192.168.1.1. After this, press Enter.

2. Then you need to wait for the control panel to finish loading. In this case, the interface will have two active fields. One of them is “Login”, and the second is “Password”. In each field you must enter the character set admin. After filling out both fields, click the “Login” button.

  • “WAN connection” - “Dynamic IP”;
  • if necessary, set the port to which the IPTV set-top box is connected;
  • in the next field we indicate that the IP address is set automatically and obtained from the provider;
  • then set automatic connection to DNS.

4. After this, save the changes made by clicking the “Apply” button and wait until the network node reboots.

5. After the router has finished loading, select “Network Map”. It is mandatory to set the following parameters:

  • set the name of the network at your discretion in Latin letters;
  • sub-item Security level - select WPA-Personal from the drop-down list;
  • in the next Encryption drop-down window set the value TKIP+AES;
  • then in the KEY field we set a password for connection at our discretion; it can consist of Latin letters and numbers - there must be at least 8 of them.

6. Click the “Apply” button again and wait until the device reboots.

7. After this, Asus RT-G32 is properly configured. The Beeline connection setup is complete.

Algorithm for MTS

The configuration algorithm for the MTS network router Asus RT-G32 is not so different. Setting up MTS, as in the case of Beeline, begins by entering the setup menu according to the previously described method. Then, in the menu item called “Advanced settings”, select the WAN subsection. It sets the following parameters:

  1. Connection type - PPPoE.
  2. Automatically obtain network address and DNS.
  3. We set the username and password that are specified in the agreement with the cable provider.
  4. If necessary, we also indicate the LAN port to which the IPTV set-top box is connected.

We save these parameters and wait for the router to reboot. After this, you need to configure the wireless connection using the same algorithm as in the case of Beeline.

Configuration for Rostelecom

In this case, the setup procedure is identical to that previously given for MTS. Moreover, this is based on the same PPPoE protocol for Asus RT-G32. Setting up Rostelecom requires the same steps. The only thing you need to remember is that the password and, of course, the login are entered from the contract.

Results

The fact that the network router discussed in this material has been successfully sold for more than 5 years speaks volumes. This is a whole era for the world of electronic technology. At the time of the start of sales, this solution was considered to be at an average level. Now the Asus RT-G32 belongs to the budget segment. Setting up is a very, very simple operation that even a novice and poorly trained user can certainly handle. To do this, it is only sufficient to fully complete all the previously indicated steps for each operator.

If you have already configured your router, we advise you to perform a factory reset before following the configuration recommendations below. This needs to be done as follows: on the back panel of the router there is a recessed “Reset” button, which you need to press for about 10 seconds.




1. Login to the router

Open your browser and enter 192.168.1.1/ in the address bar. In the "User" field enter admin and in the "Password" field - admin. Click "OK".



2. Firmware update

To update the router firmware, select the “Administration” section on the left and go to the “Firmware Update” tab. You can download the firmware on the ASUS website. Next, click the “Browse” button and specify the path to the downloaded firmware file, and then click the “Submit” button.



Attention! The router is flashed in several stages. If all connections are disconnected, do not under any circumstances try to turn off the power to the router! It will decide on its own in about 5-10 minutes. Failure to comply with this condition results in the loss of the boot sector in the main drive of the router, which turns it into an ordinary switch (switch) without the possibility of recovery.

3. Internet setup


Make sure the settings on your router match the picture.



4. Wi-Fi setup


To set up a wireless network, you need to go to the “Wireless Network” section and fill out the fields in accordance with the picture below, and then click the “Apply” button.
The password can consist of Latin letters, numbers, symbols, without spaces. Password length is from 8 to 64 characters. For security reasons, do not enter personal information (date of birth, mobile phone number) as a password.


Asus is a manufacturer of high-quality electronics, including routers for Internet access.

The Asus modem RT-G32 is recognized as a classic budget model.

This device is sold at any electronics store. It is inexpensive, which is why it is one of the best-selling modems. For a professional, setting up an Asus RT router takes about 10 minutes. For beginners, convenient instructions have been compiled, thanks to which Asus can easily and quickly prepare itself for work.

Technical characteristics of the Asus RT wireless router:

  • Type – WiFi access point.
  • The communication standard is 802.11n, the access point is on the usual frequency of 2.4 GHz.
  • Connection speed 150 Mbit/s.
  • Encrypted with WEP, WPA and WPA2.
  • Power 18 dBm.

Appearance Asus

The G32 has a sleek, modern look and can be mounted on a wall or flat surface. RT-G32 is available only in white. On the front of the Asus there are power indicator lights, as well as wireless and global network lights. On the back panel of the G32 there are reset buttons, starting a WiFi connection, connectors for connecting network devices, and a power supply. The RT-G32 router is equipped with one external non-removable antenna. The dimensions of the Asus device are 110 x 33 x 167 mm.

Connection and preparation for work

The G32 modem comes with all the necessary elements for connection: a network cable for connecting to a computer, a power supply, the router itself, connection instructions and an installation disk.

To install the RT-G32 router, you need to complete several steps:

  • Connect Asus to the power supply and plug it into the network.
  • Connect the Ethernet cable to the WAN connector.
  • Connect the network card to the LAN1 port on the modem using an Ethernet cable.
  • Perform a factory reset by clicking Reset.

Using these points, the path is implemented: “Internet - Asus Router - Computer”.

Settings

To work with the Asus modem, you need to configure the computer card. For this:

Automatic setup

The G32 is configured via a Russian-language web interface. First of all, enter the IP address in the browser: 192.168.1.1, then press Enter. The windows that appear require you to specify a username and password. By default, in both cases, the word admin is entered for Asus devices if the login/password has not been changed. In the latter case, the changed data is indicated.

A window will appear on the monitor where the interface language is set at the top of the page.

Connecting to the Internet manually using the example of some providers

The Internet connection is the main part that allows the modem to receive and send traffic. For correct adjustment, you need to carefully read the general information. Each of the existing providers uses one of several types of connection:

  • PPPoE.
  • L2TP.
  • DHCP.

This data is indicated in WAN (first menu item). After authorization, the next steps are identical. General operating algorithm – WAN; Internet connection (here you must indicate the type of connection). Next you need to follow the instructions. If you do not know any information to fill out, you should call your provider.


"Dom.Ru", "Rostelecom"

To configure these providers in the WAN, you need to specify the following parameters:

  1. Select PPPoE connection type.
  2. Set up automatic acquisition of an IP address and automatic connection to DNS.
  3. Specify the login and password issued by the provider.
  4. In the “Hostname” field, enter rostelecom.
  5. Click "Apply".


"Beeline"

The Beeline provider uses an L2TP Internet connection. To connect G32, fill in the following items:

  • Automatic IP acquisition.
  • Enter the login and password issued by Beeline.
  • In the “Service Provider” line, indicate tp.internet.beeline.ru, duplicate it in the “Host Name” (these items must be specified).
  • Click the “Apply” button.

NetByNet

The Asus router model RT-G32 is connected to NetByNet via PPTP (VPN). There are two connection options: with automatic local IP and with static local IP.

For automatic IP:

  1. Automatic IP acquisition.
  2. Automatic connection to DNS.
  3. Login and password from the provider.
  4. The “Server” field for the service provider is filled in.

With static IP:

  1. The communication technology is indicated: WAN, Internet settings, connection type.
  2. "No" for automatic IP.
  3. The required IP address is indicated.
  4. Subnet mask.
  5. Gateway.
  6. Servers 1 and 2 DNS.
  7. Login and password.
  8. Fill in the “Server” HeaRT-Beat or PPTP/L2TP(VPN) items.

To configure WiFi, you need to open the “Wireless Network” tab and set the following arguments in it:

  • Enter the Wi-Fi network name in the SSID field.
  • To protect access to the “grid”, enable “Hide SSID”, in which case the name of the access point will be known only to those in the know.
  • Select WPA Personal from the Authentication Method menu. In the “Encryption” line, select TKIP. These methods of protection are currently the most modern, reliable and widespread.
  • In the “Pre-shared key” line, specify the password for authorization on the network. The combination must contain at least 8 characters using any symbols. It is recommended to set a password that is difficult for third parties to guess. In this case, there will be maximum protection against hacking for fans of free Wi-Fi. At this point you can change your password in the future.
  • Click "Apply".

When the adjustment is completed, you need to reboot Asus and check the router's connection to the network.

Setting up Asus RT in repeater (repeater) mode

A repeater is a device required to increase the range of a network. Many modern modems are capable of operating in repeater mode. You can configure it for Asus by following the algorithm:

It is important to note that in repeater mode it is impossible to change the values ​​at address 192.168.1.1. This is due to the fact that the G32 router assigns a certain IP address to the repeater. There are three ways to access the Asus control panel:

To return the repeater to normal operation, you need to go to the “Administration” tab, select “Wireless Router” and click “Save”. The window indicates the new network name and password, after which the Asus RT-G32 will reboot.

IPTV

In the additional settings of the G32, access to IP television is established. In the WAN menu, select the port to which the TV is connected, set a dynamic IP address. These changes must be saved by clicking the "Apply" button.

Then turn on the TV and check its functionality. If the image is not visible, it means:

  1. The provider does not provide such a service.
  2. The Asus G32 modem settings do not match the TV settings.
  3. Requires a special connection type.

DHCP

This technology does not require any additional data; the only point is to indicate the connection. To do this, go to the WAN and select the “Dynamic IP” connection type.

Security Settings

The Asus RT router has additional security features:


This data allows you to work safely on the Internet and implement parental controls.

Setting up the printer

There is no direct connection to the printer for the G32; connection is only allowed through network printers with IP.

Setting up DLNA on the router

DLNA provides access to audio, video and photo files for a TV that supports this server. If the model has a USB connector, then you need to connect a storage device to the USB connector, which will be accessed from the TV. Then you need to go to the settings of the Asus G32 router at 192.168.1.1, specify the username and login. In the “General” menu, select “USB Application” and then “File/Media Server”.

In the “Media Server” item, set the On switch next to the Enable DLNA Media Server item. After that, click the “Apply” button.

To enable access from a computer, smartphone or other device, go to the “Network Neighborhood” tab, set On next to “Allow sharing of a resource”. After these steps, the drive connected to the Asus G32 will appear in the “Network” window in Explorer.

Basic mistakes when setting up the RT-G32 router

If the RT-G32 does not work after setting the settings, the following problems may be the cause:


If the problem cannot be solved by these methods, you should contact the technical support of your Internet service provider.

Firmware update via web interface

Firmware is a program downloaded from the official website that is responsible for the functionality of the device. Older Asus routers do not comply with the latest version of the program, this should be taken into account when downloading.

To flash an Asus device, you need to download the file with the program, install and run it. Then go to the router menu in “Administration” - “Firmware update”. In the field that appears, the address with the downloaded firmware is indicated. Then click the “Submit” button and the device will begin flashing. The Asus router will update itself and reboot. If the Asus RT does not reboot, you should do it yourself. Setting up the G32 after the update will require repeated steps.

When purchasing a new G32 router or experiencing problems, it is recommended to reset the settings to factory settings. To do this, the Asus router has a “recessed” Reset button, which must be pressed with a pin or wire and held for 10 seconds.

You can also reset the settings through the Control Panel. To do this, enter: 192.168.1.1 in the address bar of the browser, go to the “Administration” tab - “Manage settings”, click the “Restore” button and Ok. The factory reset will begin, you need to wait until the recovery process is complete.

Sometimes the installed settings may fail. This happens accidentally or due to a bug in the G32 router firmware. In order not to re-enter the configuration data, you must use the recovery function. To do this you need:


Conclusion

"Asus" is a simple and inexpensive device for connecting to the Internet. Setting up the Asus RT-G32 router according to the instructions and connecting to the “global network” is quite simple. The web interface is made in Russian and has an easy, intuitive menu. Asus RT is a good option for home use with average Internet speeds. For high speeds, it is better to choose a more professional device. Compatible with many existing Internet providers.

Pros of Asus RT

The G32 device has the following advantages:

  1. Easy to use.
  2. Low cost.
  3. Availability of security settings, including protection against Internet attacks.
  4. Friendly interface.
  5. Internet TV support.
  6. Sold in any store, since RT-G32 is a common modem.

Cons of RT-G32

The main disadvantages of the RT-G32:

  1. Not suitable for high speed connections.
  2. Small coverage area, which leads to low Wi-Fi power.
  3. No power button.
  4. The device may overheat.

Good day, dear readers. Today we will figure out how to set up the Asus RT G32 router literally on your knees, as experienced men and women like to say. So let's get started.

As I understand it, you and I have already purchased this router and connected to the Internet from your favorite provider. First of all, we need a patch cord (most companies, including Asus, put it in the box with the new router).

General setup of the Asus router

We take our router in our hands and start setting it up. First, we take out the provider cable from the network card of your computer and connect it to the WAN port on the router, and the new cable to the first LAN port. We plug the second plug into the computer's network card. This method is used with the Asus RT G32 model, and with any other router or router:

Wiring diagram

Next, you need to configure obtaining an IP address on the network card. The Asus device will generate the address automatically. Therefore, in Windows XP, right-click on the tray icon, select “Status”, click “Properties” and click “Internet Protocol (TCP/IP)” - then you need the “Properties” button:

Setting up a network card

In the address bar of the Browser we type the IP address, which is usually indicated on the back side of the router box - 192.168.1.1, as well as the login (admin) and password (admin), which are suitable for any Asus devices. Your RT G32 WiFi router should display the page:

When you turn it on for the first time, Asus suggests not setting anything up:

Automatic setup

We don’t agree with Asus’s proposal and go to “Home Page”:

Main settings page

We assign the desired interface language (further, the router settings will be given on the basis that the interface language is “Russian”). The Asus RT G32 router is mostly configured on the “General” tab. Different providers use different protocols: PPTP (Rostelecom), L2TP (Beeline). Before the Asus RT G32 router is configured, Rostelecom must issue seven parameters:

  1. On the “WAN” tab, in the “WAN connection type” field, select “PPTP” - there are no parameters here;
  2. In the fields “Setting up the WAN IP address” and “Setting up the DNS WAN”, check the “No” box and fill in the fields of the above sections with the data that your provider gave you (IP address, DNS address, subnet mask, gateway);
  3. Also provide your username and password as specified in the agreement.
  4. Pay attention to the section “Special requirements of your Internet service provider”: in the “HeaRT-Beat or PPTP/L2TP Server” field, indicate the parameters that you need to clarify with your provider by calling support. Otherwise, the router will not be able to create a VPN connection in principle. The support service of Asus, that is, the manufacturer of the router, has nothing to do with it. By the way, you can also assign a computer’s MAC address to the router, but not everyone needs this.

configure WAN port

If we talk about L2TP, there will be fewer letters and numbers.

A small example. When setting up the Asus RT G32 router in practice, Beeline for some reason said one word! This was the name of the VPN server. Everything is correct: the login and password are specified in the contract, and DNS and IP will be obtained automatically (the “Yes” checkbox in the “2” list).

Setting up a wireless connection

In theory, the Asus RT G32 router works using the N150 protocol, despite the letter G in its name. This means that Asus needs to work on the names. The Asus RT G32 device has the following features:

  1. On the “General” tab of the router’s main page, select “Wireless Network”. In the SSID (network identifier) ​​field we indicate the name of the wireless connection distributed by the router. You can give the network the name Asus RT G32, but, in general, any name is suitable. Next to the “Hide SSID” field, check the “No” box.
  2. Authentication Method – Select “WPA2-Personal”. WPA encryption – select “AES”. We would do the same with the RT N12 router, and in general with any Asus device that implements the AES method.
  3. Create and enter a password. The tooltip on the right indicates reliability. Your Asus RT G32 router uses up to 8 numbers and letters, but only in English.

Leave the remaining values ​​as default:

Wireless network

Click “Apply”. Nothing more is required! We looked at how to configure the Asus RT G32 router so that it “distributes Wi-Fi”. Now you need to configure the network card on your PC or laptop. I hope the reader understands that this must be a Wi-Fi card. Enable it first, and if it is already enabled, a notification will appear in the tray that the network has been detected:

Wireless networks detected

The asus RT G32 router is now fully configured. Laptop or computer is not configured. Therefore, you need to click on the new icon and select one connection in the window that appears (for example, Asus RT G32 is the SSID of our router). Having found the desired network, right-click on the name and select the “Security” tab. Here you set the encryption method and password:

Encryption method

As you remember, our Asus RT G32 router is configured for WPA2-AES. We choose the same thing here - the network is already working, the router “distributes” it!

Wireless network setup video

Next we will look at how the Asus RT G32 is configured for specific applications. We will talk about the DC++ file sharing network, but not only. Know that the Asus RT G32 router allows you to connect to your computer via RDP (remote desktop). That's what we'll do, and we'll also try to update the firmware ourselves.

How to set up a connection with the DC++ client

When the Internet connection works through a router, for example Asus or D-Link, only it is responsible for addressing, and not the computer’s network card. The router accepts Internet requests and redirects them to the IP address that it dynamically assigned to the network card. Because of this, some applications, such as the DC++ file-sharing client, have problems accessing the service. Any router has this property, and the Asus RT G32 model will be no exception. You need to perform several manipulations on the router - namely, port forwarding, i.e. configure the correct operation of the network with your router, and the router with the computer. So let's get started.

In order to start port forwarding, you need to find a special tab. In the interface of the Asus RT G32 router, the “WAN” menu contains six tabs. We discussed above how to open the first of them. Study the beginning of the article and follow the steps with the router up to “step 1”. All you have to do is go to the “Virtual Server” tab - this is one of the tabs in the “WAN” menu (on the left side of the window):

Setting up a van port

In this menu, you can create forwarding rules, although Asus has included several ready-made templates in its router. Make sure that the “Enable virtual server” checkbox is set to “Yes”. Now you can start setting up not the router, but the client.

In the DC++ connection settings, select the “Firewall with manual redirection” mode. In case of file sharing within the network, in the “External / WAN IP” field, you need to enter the address that is valid for the provider’s local network - this address is assigned to the WAN port of the router. If the DC++ client accesses the external Internet, you will need to indicate your dedicated IP address (contact your provider for information).

In the “Ports: TCP and UDP” field you need to enter the values ​​of the ports on which you plan further operation of DC++. It is better to choose one value that is easy to remember, but at the same time it is not occupied by the system. Use the link:

  • Port (TCP/IP)

Setting up ds++

After all the steps, let's return to setting up the router - namely, to the graphical interface of the Asus RT G32.

Setting up a route

On the router, in the “Service Name” field, indicate the name of our rule – for example, “DC++” (optional). Then, in the “Port range” field, specify the value of the port from which you want to redirect external traffic to the internal network behind the router. In the “Local IP address” field, you must specify the value of the PC’s IP address on the local network. You can find out this IP address in the “Status” of the connection, and you will specify the same numbers in the settings of the Asus RT G32:

Looking at the properties

In the “Local Port” field you will indicate the value of the port that is configured on the computer (the port in the DC++ client). In the “Protocol” field on the router, you must indicate what type of traffic (TCP, UDP, or all at once) will be used. We select the “BOTH” option, which means BOTH. In this case, the router will create two rules, for TCP and UDP. You can enter any number in the “Protocol number” field - the option does not affect anything. This is true for all routers in principle, including the Asus RT G32.

To enable work with a remote desktop, the router is configured in the same way as for a computer with a DC++ client. But in the “Local Port” field on the “Virtual Server” tab, a specific value is indicated - the port number on which the RDP protocol operates. We are, of course, talking about TCP port 3389 - it is used by default. And the router will not be able to interfere with RDP protocol services.

We flash the router ourselves

Everyone knows what router firmware is, but those who don’t know can at least guess. Firmware is a special program that helps any device, in this case a router, work. You need to update the firmware to improve the performance of the router, fix hidden errors, etc. All companies, including Asus, are constantly developing their software, which is necessary to develop the functionality of the equipment. Firmware for the Asus RT G32 device is available on the Asus website. There is no need to download “pirated” drivers and firmware hacked by home-grown hackers. Whoever bypasses this ban will receive an unpleasant effect - overheating. True, the Asus RT G32 router is designed without errors - it does not overheat even with “pirated” software. The firmware version of your router can be found in the web interface. Open the interface as discussed - Asus has placed all the information at the top of the page:

Additional settings

Knowing all the numbers, that is, the firmware version, we can either download and install a new one, or leave the old one. You also need to find out the hardware revision of the router - Asus prints the letters C1 or B1 on the sticker. The RT G32 model has no other revisions, and firmware for them is available on the Asus website:

Download page

The Asus website offers you to select an operating system. I think you know what operating system you have installed, pay attention to the bit depth (32 or 64). After this, a window will appear in which you have to select the firmware version. Remember the numbers indicated in the router interface:

Download the required file

After downloading the new firmware, you need to install it. On the main page, select the “Administration” item and the “Firmware Update” tab. At the bottom, next to the “Program version” field, click on the “Browse” button and select the Asus file that you downloaded. In the window that appears, click “Open” and then click “Submit”:

We update the software

The installation of new firmware on your router will begin:

Update process

Attention! While the firmware is being uploaded, the router itself cannot be turned off, otherwise it could end in disaster. Namely, the Asus firmware will be installed incorrectly, and the router will not work correctly. For the Asus RT G32 model, error protection is provided, but it is possible to get a “brick” at the output instead of a router. When the firmware is uploaded, it is best to wait two minutes and forcefully restart the router: on the back panel of Asus devices there is a “Reset” button, which is “recessed”, and you need to press it for 5-6 seconds - the router will go out and restart.

Reset button

The setup is 100% complete. For the Asus RT G32 router, the characteristics are selected so that this device can be used both at home and in the office: any LAN port can be used as a WAN port, but, alas, not with Asus proprietary firmware. Most routers from the Router RT family do not even differ in this property: the WAN port will burn out, and - hello, you seem to lose the functionality of the router and get an “access point”.

Asus is not the only company that produces routers with the ability to replace LAN-WAN. You need to look at the chipset model - for Ralink RT3050F and RT3052 microcircuits the possibility of replacement is provided. Let's name all router models with one of these chipsets:

  • Asus RT G32 of both revisions;
  • Non-Asus: D-Link DIR-300/NRU routers (B1-B4), also DIR-615 (D1-D4);
  • Router DIR-620 (revision unknown).

Asus firmware cannot be installed on a D-Link router. The reverse is also true. But “pirated firmware” works on all routers: Asus doesn’t overheat, which can’t be said about D-Link devices.