Do turn off target firmware. Samsung: Downloading… Do not turn off target! What to do? Troubleshooting Methods

Some of the owners Samsung phones may encounter a situation where their phone refuses to boot upon reboot, and the screen displays the message “Downloading... Do not turn off target" Pressing various keys does nothing, the phone does not react in any way, and the user has no idea what to do. In this article I will try to shed light on this problem, I’ll tell you why this message appears, and I’ll also explain how to get rid of Do Not Turn Off Target Samsung on your mobile device.

Translation of the inscription and reasons for its appearance

The screen I mentioned above with the inscription “Downloading... Do not turn off target” in “Downloading... Do not turn off target”, which in translation sounds like “Downloading... Do not turn off the target device” is the downloading mode that is used to implement firmware (installation of the OS and its elements) of mobile devices from Samsung. The tool used for this purpose is special program called “Odin”, designed exclusively for flashing mobile devices from this South Korean brand.

Typically, to enter this mode, you need to hold down the power button and the volume down key, and then, after entering technical mode, also press the volume up key. So you get into “downloading mode” (“odin mode”), the inscription I quoted is displayed on the device, and the device itself enters a state of readiness for firmware and connection to a PC.

Because the regular user does not know what to do in this situation, the device will remain in the Do not turn off target state until its battery runs out. After the device turns off and the user charges it again, the device will again operate in normal mode.

In addition to the reason for the “crazy hands” that accidentally launched “odin mode” on the device, there are a number of other determinants that can enter your samsung smartphone to the specified mode:

How to fix Do Not Turn Off Target error

If your phone accidentally enters Do Not Turn Off Target mode, there is no need to wait for hours until its battery runs out. Just hold down the power button without pressing it for a while (from 10 to 30 seconds), and your phone will reboot in normal mode.

Also, a good alternative would be to simply remove the battery from your device (if it is removable); some experts also recommend removing the SIM card along with the battery. Wait a few minutes and then put the battery and card back.

Usually, these actions are enough to restore normal operation of the device. If these techniques are ineffective with the Do Not Turn Off Target mode, then we are dealing with a serious dysfunction of the device, and you need to do the following:

Try resetting your phone to factory settings. I immediately warn you about the loss of user data on the device after performing this action, but if a regular reboot of the device does not help, then you can try this tool. Hold down the device's Power and Volume Up keys, wait until the image appears on the screen, and then release the keys. You will be in recovery mode, where you need to select the wipe data/factory reset option and wait for the process to complete;
If resetting the data to factory settings did not help, then you should think about flashing your device. Please note that this action should be carried out by a professional, and it is advisable to use official firmware from the developer;
It is also worth contacting the service center with a description of the problem. Your device may be damaged physical level, and various software manipulations here will simply be ineffective.

Visually, how to remove the Do Not Turn Off Target inscription can be seen in the video.

In most cases, to fix the Do Not Turn Off Target problem in Samsung, you just need to hold down the device's power key for a few seconds. If this technique does not work, then we are dealing with a serious software and hardware problem, the solution to which can be either resetting the phone to factory settings or sending the device to a service center for repair.

In the “Knowledge Base” section we look at the most common problems that may arise during the operation of Android-based devices. Today we will look at the solution to the problem with the Downloading error. Do Not Turn Off Target - how to remove the inscription. It should be noted that this is mainly the focus of Samsung tablets and phones. However, this kind of difficulty may also affect other models of mobile devices.

So, first you need to figure out what exactly could have caused the device to lock, as a result of which such an inscription appears on the screen, and then any possibility of manipulating the device disappears.

The first reason is not a breakdown, the system simply formats the partitions automatically or installs some software. In this case, in order not to turn your device into a “brick,” you should under no circumstances interrupt the operation, which is what this message says: “Loading. Don't interrupt the operation."

The second reason - system error, characteristic of certain models of Android mobile devices.

The third reason may be the state of the USB connector, when for some reason (for example, oxidation) a resistance has been created in the micro-USB socket, characteristic of a USB-Jig, with the help of which the smartphone is entered into the firmware mode (or Download Mode), as a result why the device can enter this mode without visible participation of the owner.

Troubleshooting Methods.

To avoid interrupting the normal operation of the system (as we discussed above), before proceeding with active actions, you need to wait from five to thirty minutes (the waiting time depends on the amount of information in your device). If the problem persists, we suggest using one of the methods discussed below.

First way. To begin with (if the devil is not as scary as he is painted), you can try simple steps - turn off the device, remove the battery, after a five-minute wait, insert the battery and start the smartphone again. Did not help? Then let's move on.

Second way. The point of our actions will be to go to recovery (recovery mode), and then forcefully turn off the Downloading mode. The step-by-step process will look like this:

We take out the flash drive and SIM card, turn off the gadget, take out the battery for a few seconds and put it back, press and hold the volume button towards UP, continue to hold it, press the power button. Hold until the device starts booting, after which, release the power key and continue to hold the volume rocker

As a result of these manipulations, the device should boot into factory settings mode, after which:

Activate the VOLUME UP position.
Then the RECOVERY item.
Then wipe data/factory reset.
Let’s wait a little and select “reboot system now”.

We will make the selection with the power button (on/off), and move through the items using the volume button.

For some devices, the algorithm of actions may be slightly different:

Turn off the phone.
Removing and returning the battery.
Simultaneously pressing the power/lock button and “home” (square button at the bottom of the screen)

After which we must directly . Don’t forget that our goal is to get into recovery, so you can always find out how this can be done specifically on your smartphone model. Further:

Select wipe data/factory reset, confirm by pressing “home” (if that doesn’t work, turn on/lock) - “yes”, confirm, the process of restoring all phone settings to factory settings begins.
Upon completion, you automatically return to the main recovery menu, select reboot system now, the phone will reboot and turn on without a password.

Third way. This option is used in the case described above (third reason). That is, if all attempts do not help, then you need to diagnose the USB connector and, if necessary, replace it. Flashing, resetting settings to factory settings, and other dances with a tambourine will definitely not help. Of course, the replacement will have to be done in service center, but for those who are good with hands, we offer the following video. There are no Russian subtitles, but everything is clear and accessible:

Well, that's all we wanted to tell you about this topic. Since there is no single method for all devices, there will certainly be questions, so please contact us and we’ll try to figure it out in each specific case. Good luck!

Sometimes users manage to load smartphone modes that can only be turned on if they really want to. Sometimes they ask the following: the message “Downloading... Do not turn off target!” appeared on the screen, what should I do? The main thing is not to worry, nothing bad happened.

This inscription indicates that the smartphone is in Download mode or Odin Mode, as it is also called. In this mode, you can reflash your smartphone or, say, install a recovery menu. The utility is used to flash the firmware Samsung Odin for PC or laptop.

Interestingly, before loading the Download mode, the user must press the Volume Down, Home and Power keys simultaneously when the smartphone is turned off. After this, a warning will appear, where pressing the volume down will boot the device in normal mode, increasing the volume will launch the Download mode.

Early version of the mode:

Later:

There is nothing to be afraid of here: if you are not planning to reflash the device or install the same recovery menu, just reboot your smartphone. And then the question arises - how to do this? After all, there is no separate menu item for rebooting, there are no virtual buttons at all. So what to do?

The same combination of keys works here as when this mode is turned on: volume down + Home + Power.

Press these keys simultaneously and wait for the screen to go dark. As soon as it goes out, remove your fingers from the buttons and wait for the device to load.

And remember that under no circumstances should you reboot your smartphone in this way if you are currently flashing it - this can turn the device into a brick!

Many owners of Samsung and Nexus mobile devices may have noticed that their devices suddenly rebooted, after which the message “Downloading: Do not turn off target” appeared on the screen. The dysfunction in question can be caused by various reasons, from random glitches in the operation of your Android to incorrect presses of button combinations by the user himself. Below we will look at the causes of the problem and options for solving it.

The literal translation of the message Do not turn off target is “Loading. Don't turn off the target."

On Samsung phones, the “Downloading” mode (also known as the “Odin” mode) is a specialized device firmware mode designed for rooting tasks and returning the phone to its stock state.

Single mode on Samsung

When the “Downloading” message appears, you should not wait until the device completes some kind of imaginary download. On the contrary, the device expects you to connect it to your PC and install the system files you need.

What are the reasons for the transition mobile device to "Downloading" mode? Usually they are:

Random malfunction of the device;
There are serious problems in the operation of the internal system software of the phone;
The user tried to switch to " Recovery Mode", but instead of the desired combination of the Power + Home + Volume up buttons, I pressed the combination Power + Home + Volume down;
Important system files are damaged and the device is no longer able to boot in standard mode. This may be caused by a violation of the integrity of the internal memory partitions, the lack of necessary data in the EFS folder, incorrect firmware of the gadget, and so on.

After we have found out the reasons for the Do not turn off target error on Samsung, let’s move on to options for solving it.

How to fix Do not turn off target

Let's look at a list of ways to get rid of the Do not turn off target error on Samsung.

Exit boot mode

If you got into Downloading mode by accident (by pressing the wrong buttons), then getting out of it will be quite easy.
Make sure you are in the “Downloading” mode, then simultaneously press the Power + Home + Volume Down button combination.
Do not press them until the screen turns black, then release the indicated buttons.
The smartphone will reboot in standard mode.

Use a clean reboot

Press the power button for 10-20 seconds until your device turns off.
Then remove the cover from it, take out the battery, SIM card and memory card (SD).
Now hold down the power button for at least 20 seconds (without pressing) in order to drain the phone of the remaining electricity as much as possible.
After completing the procedure, reinsert the SIM and SD card, battery, and boot your phone in normal mode.
This may help solve the Do not turn off target problem on Samsung smartphones.

Clear cache partition

If the previous two methods did not help, then the problems with your device may be caused by incorrect work its firmware. If your OS was recently updated, or you tried to reflash your device, then the appearance of the “Downloading” message may be caused by these factors.

In this case, clearing the cache partition may help. Do the following:

Perform a master reset

If specified method also did not help, then the remaining solution is to perform a hard reset of your device. Please note that implementing the latter will completely delete your personal data (photos, videos, music, contacts, application data, etc.) from the phone’s memory. Therefore, before taking this step, carefully weigh everything and make the right decision.

If you decide, then boot into recovery mode, as described in previous method. But instead of the mentioned “wipe cache partition” option, select the “wipe data/factory reset” option, confirm your choice, and then select the “Yes – delete all user data” option. Wait for the process to complete (may take about 15 minutes), then press Power to reboot your device.

Contact the service center

If none of the above helps, take your phone to the nearest certified repair shop. If the phone is under warranty, do not hesitate to use the warranty card and contact the store (center) to exchange or repair the problematic device.

Galaxy S4 supports download mode(). In this post you will find a description of how to enable it correctly.

Allows you to install OTA updates and other files manually, but to work with the mode you will have to install it on your PC Odin 1.85, Odin 3.04 or Odin 3.07, depending on your device.

On devices from Samsung used instead Fasboot / Bootloader fashion that you might encounter when working with HTC or Nexus devices. To run it, there are several options. Below is a brief description of each of them.

If your smartphone has stock firmware, That:

turn off the device and remove its battery for 5 seconds;
return the battery;
press and hold the Volume Down, Home and Power buttons;
when a message with the text “Warning” appears, they must be released;
to confirm loading the device into Download Mode, press Volume Up;
you will see
Now you can connect your device to your PC by first launching Odin.

Please note that this method works both for devices with root access and with all factory restrictions.

If on Samsung Galaxy S4 installed custom ROM, then you can download it directly from your homescreen. To do this, in the corresponding menu you need to select reboot and the “Download” option.

If there is no such menu in your firmware, then you can use another method. You will have to download and install several files. Here is a list of what needs to be done:

Download one of the files (for I9505 International, Sprint, T-Mobile or AT&T).
Copy it to the internal SD card of your smartphone.
Boot your smartphone into recovery mode: turn it off S4, and then press and hold the Volume Up, Home and Power buttons.
In the settings menu Android Clear Cache and Dalvik Cache.
Create Nandroidbackup ("backup and restore").
Select the option "install zip from sdcard", then "choose zip from sdcard".
Find the file you specified earlier and install it.
After the process completes successfully, reboot your device.

Now to download Galaxy S4 must be pressed Power button until the Device Options screen appears. There you need to select the “reboot” option, and then “Download”, and then click OK. The smartphone will boot into the required mode.