How to connect a new computer to wired Internet. How to connect the Internet via cable to a computer from a router

The World Wide Web is one of the colossal achievements of scientific and technological progress. Almost all users know how to connect the Internet via a cable to a computer, and how they work wireless network. Internet via cable is a topic that should be given attention Special attention. This importance is explained by the fact that some network users are confident that the cable is the most reliable method of getting a signal to the PC. To begin with, it is worth noting that to connect to the Internet you need a provider, with whom you must enter into an agreement for the provision of services for using the Internet. It is advisable to choose a reliable organization, otherwise even if there is a wired network in the house, there will be weak signal. If a trusted provider is selected, all that remains is to figure out how to connect the Internet via cable to a computer.

A network cable for connecting the Internet is often used within the same apartment or office to create a local network. This is very convenient if you additionally purchase a router. Using this device, you can simultaneously distribute the signal to several machines at once. If one computer fails and requires urgent repair, you can remove it through another within the local network necessary information. It is this method of work that is practiced in offices, and this explains the popularity of a wired local network. Among the main advantages, it is worth highlighting the fact that data exchange is fast and does not require the installation of additional equipment. The disadvantage is the need to purchase and install a cable. But this problem can also be solved.

The first option is to use a cable together with a router. The Internet connection is made in the following sequence, which is important not to disturb. To the entry point world wide web you need to connect the router. Network cards personal computer must be connected to the ports using patch codes. You need to make network settings in the router once, after which the Internet will appear on all computers on the local network. During further operation, there is no need for repeated settings, and the signal quality does not decrease at all. There is a misconception that scattering the signal over several machines reduces the Internet speed. In fact, this is not the case, since each computer receives high-speed access to the network. If interruptions occur, they apply equally to all machines. In the router settings, be sure to enter your login and password, otherwise there is no access to the World Wide Web.

The second option is to connect the Internet together with a router or network hub. This model works with the participation of three or more computers, but you must first perform certain settings on the main PC. This is an economical option, since you only have to pay for Internet services for one point, where the incoming signal is concentrated. Using a network hub is not suitable for most users because synchronous network access is only possible if one machine acts as a server. However, this connection method is in high demand, so it’s worth paying attention to. It is important to choose a computer that will serve as a server. Install the adapter into it and connect it to the network hub. If the local network only needed for two cars, latest device you don't have to buy it.

The Internet cable must be connected to the server to ensure a connection with the provider. Otherwise, the incoming signal will not reach the computer. In "Properties" you need to select the "Access" option. Find the line that allows other PCs to access the Internet of this computer; put a tick in front of it. Second network card the IP address 192.168.0.1 will be automatically assigned. After this, using network cable you need to connect both machines, then perform certain manipulations. On network adapter on the second computer, select the settings where you specify a similar address in the TCP/IP protocol, but set the last one not to one, but to two. In the remaining fields, enter the address of the main computer - the server. If there are more than 2 computers, there is an urgent need for an additional purchase of a network hub.

Option three is a cable Internet connection to one computer. It all starts with concluding an agreement with a provider that provides not only a high-speed signal, but also everything necessary equipment to feed and play it on a PC. This is necessarily a cable and a modem, and if necessary, a router. After connecting, you need to complete the following settings: log in via account administrator in "Start", select the "All applications" option and activate it with the left mouse button. The “Control Panel” will appear, on which you need to select the “Network and Internet” option. After that go to new tab"Network Control Center and shared access", where select the option "Change adapter settings". Next in " Network connections"Activate local network connection.

Next, open the “Network” tab, then “Internet Protocol Version 4 (TCP/IPv4)” and select “Properties”. All that remains is to automatically obtain the IP address and DNS server address by checking the appropriate boxes. The provider can provide all the necessary information additionally. In this case, the new user will have to enter them manually. Nothing complicated, but you may need the help of a specialist.

* fields are required

Windows 7. Setting up a PPPoE connection

Creating a PPPoE connection to access the Internet in Win 7

Click “Start” – “Control Panel”.
Select a section "Network and Internet" .
Next we go to .
Choose "Set up a new connection or network" .
In the window that opens, select "Internet connection" and press "Further" .
In the next window select "High Speed (with PPPoE)" .
Enter yours Username And Password for Internet access, issued by the Provider. In the column "Connection name" write ATLANT and click "To plug" .
A window will appear “Establishing a connection with ATLANT” . Press the button "Skip" .
In the final window, click on the button "Close" .
Next in the window "Network and Sharing Center" on the left select "Changing adapter settings" .
Here you will see the created connection "ATLANT" . Right-click on it and select "Properties" .
In the tab "Are common" field Service name leave it blank.
Next, go to the tab "Safety" .
Data encryption: put “optional (connect even without encryption)” .
Allow the following protocols: leave the checkbox only on "Password Authentication Protocol (CHAP)" .
Click "OK" .
In the window that appears, click "Yes" .
Click "OK" to close the settings window. The connection has been created and configured.
Press the button "Connection" . Successful work!