Cam module for digital television. Equipment for digital television is what you can buy in our store. Protecting providers from software hacking

The CAM module or conditional access module is designed for viewing encrypted satellite or cable channels. It is inserted into the CI slot of the TV or receiver and decodes channels intended for paid viewing. Some receivers, for example Skyway Classic 4, have two CI+ slots, which allows you to simultaneously watch paid channels from two different operators (for example Tricolor and NTV+). Today, many TVs are equipped with a tuner for receiving satellite signals and have a slot for a CAM module. However, to view encrypted channels of Tricolor and NTV+ operators, the tuner and slot must meet the following characteristics: the tuner must support the DVB-S2 format, and the slot must support the CI+ format. Although most brands of TVs meet these requirements, you should carefully study before purchasing specifications.

Since the modules are quite new development, many people face difficulties in initial setup and operation of CAM modules.

I would like to start with the fact that the installation of modules on TVs from different manufacturers varies, and sometimes very seriously. LG proved to be the simplest and most loyal to the module. Here you just need to insert the module into the TV. Select a satellite dish in the menu and search for channels of a specific operator (Tricolor or NTV) and it will automatically and correctly find the channels of the selected operator.

But the most problematic from a setup point of view are Sony and Thomson TVs. You need to manually add the name of the satellite to them (recall that the satellite of the NTV-Plus and Tricolor operators is called Eutelsat W4 or Eutelsat 36E), as well as add transponder parameters (frequencies: 12226 for Tricolor and 12322 for NTV+) and converter local oscillator frequencies for both operators: upper and lower frequencies - 10750. Then you need to select “network search”, and the TV will find all channels of this operator. If there is no “network search” item in the menu, then all transponders will have to be added manually. Full list transponders are available on the operator’s website.

Now let's look at the most common problems and errors when working with the CAM module. The first and most common problem occurs when the TV initially initializes the module. When this happens, the TV sees the module, all information about the module and card is displayed in the menu, however, when the channel is turned on, it writes an error (the error code and explanation are different for different brands and TV models). In such a situation, you need to act as follows: turn off and turn on the TV. After turning on the TV, checking access rights between the TV and the module will begin again. In most cases, this method is more than effective. However, in some cases, for example, after a power surge or a sudden power outage, the settings of the module itself may be lost. Then the access rights check will not be carried out until the CAM module settings are reset to factory settings through the TV menu.

Now regarding the problems associated with software of modules and televisions. Problems Not correct operation with modules are usually found on early model TVs. But, fortunately, these problems can often be eliminated by installing the latest software for your TV. As for the module software update, it occurs only from the satellite. In NTV+ modules, the update can be turned on forcibly by simply selecting the required item in the menu. In Tricolor-TV access modules, satellite updates are broadcast for a limited amount of time (1-2 months), if during this time you have not managed to update the software, you will have to wait for the next one.

Despite the simplicity of the design, the CAM module cannot be bent or disassembled, and it is especially not recommended to reprogram the module, with the exception of the official operator software. You also need to protect the module from moisture, and if you remove the module from the TV for a long time, make sure that its connector does not become clogged.

Despite the complexity of the initial setup, CAM modules are an ideal alternative to satellite receivers. Thanks to their simple design, they are more reliable than a receiver, they do not need an outlet, a remote control and do not take up space.

Important! Since Tricolor and NTV+ use different encodings(NTV+ uses Viaccess, and Tricolor DRE-crypt) therefore, NTV modules do not fit Tricolor cards and vice versa.

We would like to draw your attention to the fact that guaranteed viewing of all channels is possible only if the latest version is installed on the receiver software(software) module. Current version Software - 1.2.0 (for new modules 1.0.0).
To see current version For the software of your module, you need to use the user manual to find the item “CI Menu” (or “CI Parameters” in the TV/receiver menu; the name may differ depending on the TV/receiver model. Next, you need to follow the path “Information - Module - Tricolor CI+ CAM". The "Software version" line will indicate installed version Module software.

To update the CI+ module software, you can contact our Tricolor TV dealership in Moscow.

Please note that to ensure correct operation of the module, the software version of your TV/receiver must be up to date. You can check the software version information on the official website or in the support service of the TV/receiver manufacturer.

To restore viewing: manual search channels (with network search enabled):
- Step 1. To start manually network settings channels, you need to switch your TV to satellite channel tuning mode. To do this, you need to go to the signal source (antenna) settings section in your TV menu.
- Step 2. Next in the setup menu you need to find the section “ Manual setting" and go to it.
- Step 3. Before starting channel search, make sure the following parameters are set:
1) Network search option is enabled
2) The following parameters are used for searching:
- Frequency (transponder) - 12226 (H/L)
- Symbol rate - 27500
- Satellite - Eutelsat 36E
If necessary, enter these parameters manually.
- Step 4: Then start searching for channels and follow the instructions on your TV screen. During the search process, the TV should display information about the search progress and the channels found.
- Step 5: Once the process is complete, confirm saving the channel list (the prompt may not appear on some TV models).
Please note that some TV parameters may be missing or named differently (if necessary, you can check the information with the TV manufacturer’s support service).

We will also consider setting up the CAM module of Tricolor TV using the example of an LG TV:

In the Menu Advanced settings - Channels, select Search for channels and settings.

Auto search.

Specify the channel search mode - Satellite.

Select the Other Operators option (To delete all previously existing channels)

Select the Tricolor TV option

Go back a few steps or press the EXIT button several times.

Go to the main menu: Advanced settings - Channels - Channel search and settings.

In the Channel search menu, select Manual search.

Attention! Check the reception mode: it must be set to Satellite!

Select the Transponder menu item, in the drop-down menu select absolutely any frequency (!except!) 12226/L/27500

Click on the Transponder menu item again and now select 12226/L/27500 (Check that the UPDATE or ADD button is available but do not click on it!)

Select the menu item Network Search and click on the On option.

Press the UPDATE or ADD button, the search for channels on the network will begin.

Your LG must scan 22 transponders (about 300 channels, this figure includes TV and radio channels)

After scanning is completed, press the button on the remote control - EXIT to return to viewing.

You can also search by satellite. In this case, all channels that are available on the satellite specified in the settings will be saved.
If you are unable to search for channels on your own, you can always contact the support service of the TV manufacturer or the official Tricolor TV Dealer Center.

To connect satellite or cable television directly to a television receiver, the user will need a CAM module for the TV. Connecting it to your TV is easy if you know what to do to solve this problem.

Modern Smart TVs are becoming more and more convenient and no longer require connecting auxiliary equipment to broadcast cable or satellite channels.

Built-in tuners receive streaming video and decode the signal various formats, but they need help to work. It is provided by the KAM module ( ) is a miniature computer that first converts the digital stream and then matches it with the TV signal system. To function fully, the device requires a smart card, which can be purchased from your service provider.

By purchasing a TV with a CAM module, the consumer receives a number of additional benefits. Firstly, it saves on price, because you don’t have to buy or rent a receiver from a provider to watch cable or satellite television. Secondly, it is easy to set up.

The device is placed in a special slot on the TV, after which you just need to do automatic setup television channels. Thirdly, it's saving free space which would be required to install a satellite receiver, as well as the absence of unnecessary wires and the need to allocate an additional outlet or connect network filter. Fourthly, control is carried out using one remote control from the television receiver. When connecting the receiver there will be two of them.

CAM modules for TVs come in several types:

• simplest. Works with only one coding system. If the user changes provider or switches to a satellite with a different broadcast system, this device will need to be replaced. Most pay TV channels are broadcast in various systems encodings, so such CAM modules are not able to recognize them;
• most common. Such a device is independently updated and rebuilt to the right system when connecting a new smart card. If the user has several smart cards from different providers, he will be able to switch between them if he wants to watch certain television channels;
• universal. Flashed and configured for a range of encoding systems and works with various smart cards. Able to independently tune TV programs, as well as automatic mode adjust signal parameters. Used to work with paid software packages.

Principle of operation

To use the CAM module to broadcast satellite or cable television channels, the user will need to purchase a Smart card from the provider. This is a small plastic card with a microchip that identifies the subscriber and gives him access to digital television and pay TV channels.

It must be inserted into the CAM module and then installed into the television receiver. Next, the user will need to configure the channel list, after which he can start watching.

Best models

1. Irdeto (SCM).
2. CAM MTS TV module with card.
3. Access module (CAM) Tricolor CI+ with Ultra HD support

How to connect

To connect the CAM module, no specialist assistance is required. The user can do all connection steps independently if the TV has an appropriate CL slot.

Installing the module in Samsung TV, LG or another brand is exactly the same and looks like this:

• place a smart card in the CAM module. To do this, you need to turn the device facing you and put the card inside, turning it over with the electronic chip facing up;
• disconnect the TV screen from the network and connect the CAM module to the CL slot face up;
• turn on the TV receiver. The display will indicate that new equipment has been installed;
• perform automatic tuning of television channels.

If the steps are completed correctly, the user will be able to start watching TV programs. If after setup there are no channels or nothing happens after turning on the TV receiver, this means that the smart card or CAM module is installed incorrectly. It is recommended to remove them from the connector and reconnect.

Conclusion
Knowing what a CAM module is, what it is needed for, how it works and how to connect it to the TV, the user will set up satellite or cable television in a television receiver without the use of additional equipment.

The connection process is simple if you know the correct procedure. More detailed instructions The user will find it in the device's instruction manual.

The standard connection diagram for Tricolor satellite television is as follows: satellite antenna– receiver (receiver) – TV. If you have a modern TV model, then this chain can be simplified: instead of a separate TV set-top box, use a CAM module. What it is, how it works, how to connect and how to configure the Ci “Tricolor TV” module, we will consider further.

What is a CAM module?

A CAM module, or conditional access module, is a special device that is inserted into the Ci or Ci+ slot in a TV equipped with a built-in DVB-S2 receiver. The module's task is only to decode the provider's paid channels using a smart card with a chip and a unique individual number. The satellite signal is processed by the TV itself.

How does the Tricolor TV CI module work?

How the Tricolor TV Ci module works can be described as follows: it decodes the received signal and then transmits it in decrypted form to the receiver built into the TV. The previously encrypted channels of the Tricolor TV operator become available for viewing. When using the module, it is important to monitor software updates for the TV itself, because The signal is processed by the DVB-S2 tuner built into the TV. If access to channels is terminated (the channels are encrypted), and the module and smart card are not damaged, then you need to configure the TV itself.

What types of Tricolor TV CAM modules are there?

Custom CAM modules for viewing Tricolor TV are produced in only one format: single-system, single-channel. They are easy to set up and operate and provide access in the DRE-crypt encoding system on a single TV. Universal multi-channel modules, with which you can watch several channels simultaneously on different devices, are too difficult to set up and require special expensive equipment for operation.

Single system option

Universal option

Universal modules are capable of supporting several channel coding systems and broadcasting different channels to subscribers on the television network. You will watch the channels of the operator whose smart card you purchased and inserted into the module. But to operate such devices, you need special expensive television stations and complex programming and configuration of equipment. For this reason, universal modules are only used when connecting large quantity subscribers, for example, in apartment buildings.

The advantages of such equipment

The significant advantages of using the CAM module include the following:
- the absence of a second remote control for the TV tuner, as well as the TV tuner itself as individual element;
— the satellite dish is connected directly to the TV, which eliminates unnecessary wires and improves the quality of broadcasting;
- more high quality images - the ability to view channels both in SD and HD formats, and in the new ultra-high quality - Ultra HD 4K (UHD).

How to configure the Ci “Tricolor” module on a TV?

Module "Tricolor TV" Ci: how to connect and configure? This procedure is quite simple. To connect the Tricolor TV conditional access module, first you need to make sure that your TV is equipped with a Ci-slot, purchase a CAM module and a smart card. To connect the Tricolor TV Ci module, you need to insert a module with a smart card installed in it into a special port on the TV. This must be done with the TV turned off.
Now let’s figure out how to set up the Ci+ “Tricolor” module on your TV.
After turning on the TV, information about identifying the module and the Tricolor TV smart card should appear on the screen: “Attention, access rights are being checked.” If the check does not occur, then go to the Ci module settings and click on the “Reset to factory settings” button. The TV will reboot. When the module is identified, a green light will appear on it. After this you need to configure the channels. In many modern TVs (especially Samsung and LG), channel tuning is carried out automatically when you select the Tricolor TV operator. If your TV does not support this mode, then you need to manually enter the parameters: type of antenna, satellite, converter. If you managed to do all this, then move on to setting up channels in the corresponding section of the menu. Request channel search frequencies in advance from Tricolor TV technical support or look on the Internet. After you finish setting up the channels, leave the TV on the “Russia-1” channel until the programs are activated (from a few minutes to 8 hours).

How to update the CI module "Tricolor" TV?

For continuous display of channels and correct operation of the Tricolor TV Ci module, it is necessary to promptly update: the software of the TV and the module itself.
If the TV is connected to the Internet, set the settings to " Automatic update Software”, then it will happen automatically. If it is not possible to connect your TV to the Internet, then follow the updates yourself on the manufacturer’s website, download to a USB flash drive and update according to the instructions via the USB connector.
The module software is updated via satellite. All you need to do is turn on channel number 333 “Telemaster”, which will offer to update to the latest version, and click the “OK” button. After installing the update, the module should automatically reboot. If this does not happen, you need to turn off the TV, remove the adapter from the slot and put it back, then turn on the TV. If for some reason you were unable to update automatically, you can download instructions on the Tricolor website that describe how to update the Tricolor TV Ci module yourself by downloading files from latest version software. If nothing works, you can contact the Tricolor TV support service or call a wizard to configure the module.

Modern TV models are equipped with built-in digital TV tuners that are capable of independently decoding closed-circuit television programs without the use of an external receiver. But in order for the built-in tuner to function, there is a mandatory requirement - the presence of a special signal matching module, that is, a CAM module.

According to the definition, a CAM module is an electronic device that is used as an adapter when decoding paid media content that is encrypted. It can support work with one coding system or several at once. In addition, such a device has a special slot designed for a smart card, an individual access key, which is received by each subscriber of digital satellite television providers.

In turn, the smart card has a unique number and allows the service provider to control the degree of access to encrypted TV channels for each specific user.

How exactly does the conditional access module work?

In practice, everything looks simpler and clearer than in theory. Each new satellite television subscriber receives a smart card containing access keys. It looks like a simple plastic card with a small electronic chip. The card is placed in the CAM module slot, after which it is inserted into the CI connector on your TV.

As you know, any TV channels that are broadcast on your satellite TV are divided into two groups, namely:

Free (open). These are the simplest and most common channels that are always open to all users;

Paid (closing). These include the most interesting, high-quality and informative TV channels. They can be dedicated to sporting events, show the life of wild animals, or they can broadcast good domestic and foreign films, for example, in HD quality. Naturally, it makes no sense for the provider to provide them for free, so they are encrypted.

The built-in digital tuner reads access codes from your smart card and decodes all closed channels according to the conditions of your package, as a result of which you can always enjoy high-quality and interesting TV programs.

An important advantage of the built-in digital tuner and CAM module is that there is no need to use additional equipment, namely a separate external receiver in the form of a set-top box. This is very convenient, because everything you need is already on your TV. While a separate receiver takes up space, collects dust, and uses a whole bunch of wires to connect it. In turn, a TV with a conditional access module is much easier to mount on vertical surfaces, for example, on a wall. Minimum wires and maximum space saving.

What TV models are suitable for using the CAM module?

It is worth noting that not all models of television devices can be used with a conditional access module. It is important that the TV has a built-in digital TV tuner, and also supports the appropriate digital satellite television standard (for example, DVB-S or DVB-S2).

There may be a connector for a CAM module on the back of the TV, but the TV may not have a built-in DVB-S or DVB-S2 tuner, and to ensure that your TV can work with a CAM module to receive satellite TV, there must be a special one on the back of the TV threaded connector for connecting a satellite dish. If there is a connector for the CAM module but there is no threaded connector as in the photo, then your TV does not have a tuner for receiving satellite channels and, accordingly, the CAM module will not work for you!!!

In general, almost everything modern models TVs from popular global brands (LG, Samsung, Philips and many others) are equipped with built-in digital tuners, as well as a special CI connector designed for the CAM module. If you do not know whether your TV meets the requirements described above, you can determine this by studying the technical specifications of the device or by consulting with the seller.

How is the CAM module configured?

Using the conditional access module, you can configure satellite channels digital television. To do this, you just need to first make sure that the device is installed correctly and that your TV “sees” it and also reads the data from the smart card.