How to get iPhone out of recovery mode. How to exit recovery mode. Especially for iPhone, iPad or iPod. What is a recovery loop

A smartphone from the Californian brand Apple is technological thoroughness, multiplied by the absolute practicality of the device, and all this is elevated to the degree of reliability. Such a statement in favor of the mentioned American company today is a kind of a priori in the mobile device industry. But... no matter what perfect qualities an “Apple” phone has, and without which the iPhone recovery mode can be considered a peculiar one, in a critical situation the user will not be able to cope by definition, since the iOS operating environment is a system whose operation is associated with a mandatory process - setup functionality. You, dear reader, will learn about this option and how to use it from the material in this article.

“Trouble came from where we didn’t expect it”: briefly about the causes of problems with the iPhone

Like any other computerized system, iOS is at risk of software failure, which may ultimately result in partial or complete inoperability of the device as a whole. Since the iPhone is, first of all, an individual means of communication, its functionality provides the ability to organize certain settings in accordance with the user’s preferences: display brightness, font size, alert type and a number of other changes. At the same time, we should not forget that the iPhone is a multifunctional mobile device that can interact with its owner through installed software. iPhone recovery mode will become a popular tool in cases where the user incorrectly installs an application or implements third-party software solutions (with active jailbreaking), which ultimately negatively affect the full functionality of the device.

As a reference: the concepts of “upgrade” and “rollback”

The name “iPhone Recovery Mode” refers to both the implemented method of returning the device to the initial settings, so to speak, to factory settings, and the implementation of an algorithm for updating the operating environment by completely replacing system files. In this case, the OS version can be left the same or upgraded to the current state. The two points described above are fundamentally different. Therefore, the user must independently decide which option is most appropriate in terms of implementation. However, in order to determine which method is the most rational, you should pay attention to the signs of a malfunction and only then use the iPhone recovery mode.

Analysis and diagnostics

So, first of all, you need to understand what exactly happened to the phone:

1. Systematic “glitches” are observed during the operation of the communication device.
2. The phone is frozen and does not respond at all to pressing the navigation keys.
3. At the first stage of loading iOS, the logo simply “hangs”, without obvious signs of OS activity.
4. When you turn on the phone and nothing else...
5. The mobile device reboots spontaneously.
6. The user is firmly convinced that the phone was not subjected to any mechanical stress, and one of the devices on the device stopped working: Bluetooth, Wi-Fi or camera.

How to Enable iPhone Recovery Mode: step-by-step instruction

You should not immediately resort to drastic measures, one of which is considered to be the direct process of flashing. It is likely that a simple “reset” will become precisely the means of restoring the functionality of the illuminated communication device. Perhaps activated “Recovery Mode” can cure mobile illness. Start with simple solutions and only when they are useless, move on to more serious iPhone reincarnation scenarios.

Step #1: Banal reboot

1. You must simultaneously hold down the “On” and “Home” keys and hold them in this state for 10 seconds.
2. After the logo appears, the phone will begin to “come to life.”

Step 2: Traditional reset through the settings menu

iPhone 5 recovery mode can be activated using standard device tools.

1. Go to the "Settings" menu.
2. Then go to the "Basic" tab.
3. Activate the "Reset" item.
4. From the list that appears, select the type of memory cleaning that is most suitable for you.

Step #3: How to enter Recovery Mode

In order to use this recovery mode, the iPhone 5s or a similar device of another modification must be completely turned off.

1. Press and hold the Home button and connect the supplied USB cable to your phone.
2. Only after the iTunes and USB logo is displayed on the mobile screen can the pressed key be released.

Of course, the connecting cable must be connected to a computer on which the current version of the above program for working with an iPhone device must be installed. If all your actions are performed correctly, a service message will appear on the monitor notifying you that the connection has been successfully completed.

Step #4: Return iOS to its original state using Recovery Mode

Knowledge of how to enable iPhone recovery mode is not enough to correctly and correctly carry out the entire process of this type of software maintenance.

1. After you have connected, a system prompt will appear on the screen with three buttons displayed (at the bottom of the window): cancel, update and restore.
2. Your choice is the last option listed.
3. In the iTunes program window that opens, you also need to activate the “Restore” button.
4. After this, the recovery process will begin.

Step #5: iOS Update (Device Firmware Update)

Entering the iPhone into DFU recovery mode is quite simple, however, do not forget that after the subsequent firmware process, all user information from your device will be destroyed. Therefore, if this is possible, you must first make a backup copy of the data.

1. Connect your phone to your computer using a USB cable.
2. Turn off the device completely.
3. Hold the Home and Power buttons for 10 seconds.
4. After the above time has elapsed, release the power key.
5. After some time, a message will appear on the computer screen stating that the recovery of the iPhone 5 (the modification is indicated as an example) has been activated, that is, you can carry out further actions with the phone.

Step No. 6: Firmware bypassing the device’s operating system

Despite the fact that the iPhone screen continues to frighten with its display blackness (meaning the “Device Firmware Update” mode), iTunes detects the connected device and displays a corresponding message on the monitor. The recovery algorithm remains the same (see step No. 4). However, in DFU mode, the firmware process proceeds most correctly, since the smartphone’s memory undergoes initial formatting and the operating system is installed in the cleared area of ​​the mobile drive.

1. Download the latest version of iOS from the official Apple support website.
2. Hold down the Shift key and click the Restore button.
3. Specify the directory where the downloaded version of iOS is located.
4. After a short firmware process, the user is given the opportunity to return the saved data (backup) to the updated device.
5. If you don't have a backup, simply disconnect your phone from your computer and deactivate recovery mode.

An iPhone 4 or another Apple device cannot be flashed with a downgraded version of iOS. However, this restriction is of a purely official nature, since today there are a lot of ways in which older (than originally installed on the phone) system software, so to speak, which has proven itself to work stably, can well be installed on the iPhone without any further negative consequences. By the way, they are incredibly popular among owners of presentable Apple devices, as they can significantly expand the functionality of the “canned” capabilities of the official version of iOS.

Finally

So, before you put your iPhone into recovery mode, you need to be firmly confident in your actions and the correctness of the selected software repair algorithm. Meanwhile, it may well be that the user uses the cloud update option - iCloud. In this case, you need to charge your phone and be prepared for the fact that the recovery process will become a somewhat lengthy task. But there are no guarantees (when using this method) that everything will be successful, since often the speed of the Internet connection leaves much to be desired. Good luck with the restoration process and stable operation of your iPhone device!

Apple devices are distinguished by a high level of reliability. Errors in them occur very rarely, “glitches” occur infrequently. Thanks to this, they have earned the honorary title of the most reliable and error-resistant smartphones/tablets. However, in some cases, errors still occur, which leads to incorrect operation of the devices. What to do if your iPhone or iPad starts to behave incorrectly or stops loading altogether? How to enter recovery mode on iPhone or tablet?

In this article we will look at:

• How to start recovery mode on iPhone and iPad;
• How to enter DFU mode;
• What is the difference between recovery mode and DFU mode?

After reading this material, you will receive maximum information about restoring the functionality of Apple devices.

We have already talked many times about restoring iPhone and iPad using DFU mode. Now we need to learn a new term - this is recovery mode (or Recovery Mode). It allows you to get rid of errors in the functionality of smartphones/tablets and perform a factory reset. How is it different from DFU mode? The main difference is that user data in the internal memory remains safe and sound.

The recovery mode also has the following differences:

• Components and modules of the operating system are rolled back to factory settings, but are not created anew;
• All parameters are reset to factory settings;
• The integrity of the file system is checked - the devices are prepared for correct startup.

The same DFU mode provides for the complete deletion of all user data, complete formatting of the internal memory and re-creation of modules and components - that is, it is as if a complete reinstallation of the entire operating system occurs.

Despite the safety of the recovery mode, you still need to create backup copies before entering this mode - who knows what could happen to important data?

We have already talked about how to enter DFU mode and restore the operating system to its original factory state. To do this, you need to hold down the Power key and the Home key, wait 10 seconds, release the Power key and continue to hold the Home key for another 10 seconds. Next, release the key and switch to DFU mode - all this time the smartphone/tablet must remain connected to the computer.

Please note that when entering DFU mode, iTunes must be running on your computer, which will restore your device. It will recognize the device connected in DFU mode and prompt you to take the appropriate actions.

In order to enter recovery mode on your iPad or iPhone (Recovery Mode), you must perform other steps. First, turn off the device completely - its screen should turn black. Next, click on the “Home” button and connect the smartphone/tablet to the computer. After a couple of seconds, the iTunes application icon will appear on the device’s display – recovery mode is activated. By clicking on the corresponding button in iTunes itself, you will start restoring the operating system.

Here we see another difference between the recovery mode and the DFU mode - in the contents of the screen. If you enter DFU mode, the screen will be black, and iTunes will notify you about working in this mode. In Recovery Mode, the iTunes application icon with the cable connected will be displayed on the screen. In addition, when entering recovery mode, iTunes must be turned off on the computer - launch it after the logo of this application appears on the screen.

Putting your iPhone into these modes does not affect your warranty, so you can use these modes as many times as needed. But what to do if you suddenly change your mind about returning your Apple device to its original condition? How to get iPhone or iPad out of recovery mode? This is done literally with one click of a button. The main thing is to think about your actions before the start of recovery, and not during the procedure.

To exit recovery mode, disconnect your iPhone from your computer and press the power button. Hold the button for 10 seconds until the smartphone reboots. After that, it should start normally, ensuring the operating system starts. Exit recovery mode on iPad in a similar way.

Do not under any circumstances interrupt an already running recovery - by doing so, you will harm your gadgets and damage the operating system.

Sometimes a screen with a USB cable and the iTunes icon appears as a result of unsuccessful updates or flashing iOS, and when connecting to iTunes, a notification appears with the text:

iTunes detected your iPod, iPhone, or iPad in recovery mode. You must restore this device before using it in iTunes.

Sometimes such unpleasant moments happen: the iPhone does not turn on, i.e. turn on, it turns on, but iOS does not load.

2. Launch the TinyUmbrella application. There are versions for and for.

3. Enter iPhone into DFU Mode (instructions at the bottom of the page).

4. In the application, click the Fix Recovery button after TinyUmbrella detects your device.

5. Confirm the action.

6. After this, the application will turn off the device and you can turn it on normally.

The TinyUmbrella app also allows you to enter and exit your smartphone into Recovery Mode without using a force reboot or iPhone buttons.

Usageredsn0w:

1. Connect your iPhone to your computer.

It is worth noting that this application is no longer supported and can only be downloaded from the developer’s website. But if you decide to use it, you should do the following:

1. Connect your smartphone to your computer.

2. Launch the utility.

3. Click Exit Recovery after the program detects your iPhone.

4. Wait for the reboot.

The very last method that we will consider does not involve the use of specialized programs. It is the most drastic and allows you to definitely get your smartphone out of the recovery loop.

This method is a complete firmware recovery via iTunes in DFU Mode. We have already given this iOS recovery method, and you should know that in this case you will lose all saves and data from the device memory.

How to switch to DFU mode:

1. Connect the device to the computer.

2. Turn off your iPhone, iPad, or iPod Touch.

3. With the device turned off, simultaneously press the “Home” and “Power” buttons.

4. Keep both buttons pressed for 10 seconds.

5. After 10 seconds, release the “Power” button while continuing to hold the “Home” button pressed.

6. Hold down the “Home” button until the computer recognizes the iPhone in DFU mode.

There are times when, due to a firmware update via Wi-Fi or a system failure, your iPhone, iPod or iPad refuses to boot normally. This is often encountered by users who decide to jailbreak their device or who are experimenting with installing various tweaks from the Cydia store.

If such a situation arises, do not be upset, the problem can be solved by yourself in almost any situation, if it arose at the software level - simply by restoring the firmware. On devices with the iOS operating system, updating and restoring the firmware can be done simply by switching it to Recovery or DFU Mode.

In this article we will tell you what Recovery Mode is and how to enter and exit this mode. ABOUT DFU mode You can read in our article How to boot iPhone and iPad in DFU mode

Recovery Mode- this is a software mode for flashing the device, in which the main system files are not affected, only their integrity and recovery are checked, iOS settings and parameters are reset, and changes are made during the update, if any.

If you see an image of a USB cable and the iTunes program icon on the device screen, then your gadget is in Recovery Mode. The device enters this mode as soon as you begin the process of updating or restoring iOS using iTunes on your computer, or you yourself have switched your iPhone and iPad to Recovery mode.

How to enter Recovery Mode

You can put your iPhone, iPod or iPad into Recovery Mode from absolutely any state of the device.

Step 1 Turn off your iOS device. Press and hold the Power button until the slider that says Power Off appears on the screen, then drag it from left to right to turn off the device

Exiting recovery mode is quite easy. To do this, press and hold the Power button until the device turns off, then press the same Power button again to turn it on again in normal mode.

It also happens when an iPhone, iPod or iPad refuses to exit Recovery Mode. The device enters Recovery Mode Loop mode. In this case, to remove the device from this mode you need to use special utilities, such as TinyUmbrella, redsn0w, RecBoot.

Read more tips in our public pages on social networks, and also add the article to your bookmarks

After the release of iPhone 8, problems arise as a result of this. A common problem is that a USB cable and an iTunes icon appear on the screen, which means the iPhone, iPad and iPod are in recovery mode. Well, how to get your new iPhone 8 out of recovery mode? Today we will tell you.

What is recovery mode

First, we need to find out that this is a recovery mode, and then find ways to withdraw. Recovery Mode is a condition in which device diagnostics cause software or hardware errors, and after a forced reboot they cannot be eliminated.

How is it different from DFU mode?

In Recovery Mode, you can reflash your phone via iTunes using the firmware.ipsw file. This solves many problems.

DFU (Device Firmware Upgrade) mode differs from Recovery Mode in that it bypasses the iPhone operating system and directly reflashes the firmware. This is an effective method and it allows you to solve problems such as the inability to reflash via iTunes to Recovery Mode, the inability to unlock the phone, etc. I would recommend using it always in order to avoid unnecessary fuss with flashing and unnecessary problems.

How to manually exit iPhone from recovery mode

You can exit Recovery Mode yourself through a forced reboot by simply pressing the Home + Power button and holding these buttons for 10-15 seconds. After this, your device will reboot. If this doesn't help, try the following ones.

How to get your iPhone out of recovery mode using Tenorshare ReiBoot

Before exiting recovery mode, you must download and install it on your computer. In fact, Tenorshare ReiBoot allows iPhone, iPad and iPod to recover from 1-click recovery mode for free.

Connect your iPhone/iPad/iPod touch to your computer using a USB cable. Then Tenorshare ReiBoot recognizes your device in recovery mode, click the “Exit Recovery Mode” button. Wait a bit and the device will reboot safely. Do not disconnect the device during this process.

In addition, if the gadget freezes on the apple, freezes when making a call, the screen goes blank or the display does not respond to pressing, the button does not work, the device reboots cyclically, the apple is on fire and others, Tenorshare ReiBoot helps you eliminate these errors. It supports rolling back from iOS 11 beta to iOS 10.3.3 without data loss, another important feature is that if you have forgotten your lock password, through deep recovery the program can reset the password and reconfigure it.

How to exit recovery mode using redsnow

Download and run the program, in the next window click “Extras”, and then “Recovery Fix”, then switch the device to DFU mode according to the instructions, and you safely remove the iPhone from recovery mode.

Getting iPhone out of recovery mode using tinyumbrella

The first thing you need to do is download and install tinyumbrella on your computer from the official website, and run it. Connected the iPhone to the computer using a standard cable.

1. Click on the unidentified device, in our case – 1114116

2. On the right side of the TinyUmbrella program, click the button – Exit Recovery.

As soon as we pressed the Exit Recovery button, our iPhone rebooted. Thus, we still managed to exit recovery mode and return the iPhone to its previous working state.

Getting iPhone out of recovery mode without using a computer

Without a computer and want to get your iPhone 5s out of recovery mode, this is impossible. Force reboot iPhone 5s - if it's effective, then you don't require Windows or Mac.

Getting iPhone out of recovery mode via iTunes

Using iTunes, exiting iPhone 6 from recovery mode is a common way that can update your device to the latest version to restore the iOS system. But the fact is that by restoring an iPhone or iPod in iTunes, we will lose all information and all data, since before restoring it is necessary to create a backup copy. Next, we'll find out how to exit recovery mode using iTunes.

• Then you can open iTunes, connect your device to PC using a USB cable.
• Wait until the image of the iPhone with the cable connected appears on the screen.
• Click the “Restore” button in iTunes. The device will start working like new again.

Among the many cell phone brands, Apple is still one of the most popular. This company has long established itself as a reliable and high-quality manufacturer, not just of cell phones, but of high-tech devices.

It should be noted that popularity and mass production make this brand increasingly vulnerable to malware. And each new model already contains one or another flaw.

Therefore, users increasingly have to learn how to perform iPhone recovery mode.

What is Recovery mode and why is it needed?

Any manufacturer's phone has a special menu that allows you to restore factory settings. The function may be required when problems arise with the device and you need to return it to normal operation.

On devices that use iOS, the recovery mode is called Recovery mode. Not only the iPhone, but also the iPad and iPod have this capability.

This mode will help the device if a problem occurs in the program. If problems occur, a factory reset can restore the phone to normal functioning. The advantage of such a restoration is that when using it, the manufacturer’s warranty obligations are retained.

How to activate recovery mode

Recovery on all devices, including Apple, is launched using buttons. In the case of the iPhone, the choice of button set is small. When touchscreen phones freeze, they can drive the user into a stupor. After all, on the one hand, the absence of many buttons and manipulation only using the sensor is convenient, but on the other hand, if problems arise, there is a misunderstanding of where to press.

Therefore, it is better to familiarize yourself with the correct entry of the phone into recovery mode:

How to disable recovery mode

The user needs to remember that it is required not only to correctly enter Recovery mode, but also to be able to exit it.

This can be done in several ways:

1. When the iTunes icon and cable image appear on the screen, you need to hold down 2 buttons: “Home” and “Power”. You need to keep them in this state for about 10-15 seconds. Then turn on the phone using “Power”.
2. The method may not help if the user is in the “Recovery loop” mode. Then you will need to install special programs to exit Recovery mode. These could be programs such as TinyUmbrella, redsn0w, RecBoot.

What is a recovery loop

Recovery loop is a condition of the iPhone in which, after a forced reboot, the phone does not start working normally, but continues to show the user a black screen with the iTunes logo and a cable image. The reason for such a hit may lie in an erroneous iOS recovery or a software glitch. This could also be a situation where the cable was accidentally pulled out when changing software. You can get out of this state using the special programs described above.

For example, to get out of a loop using TinyUmbrella, you would:

1. Connect your phone to your computer via a USB cable.
2. Start launching the TinyUmbrella program.
3. Put your phone into DFU mode.
4. Click “Fix Recovery” in the program.
5. The phone should turn off and on on its own.

With redsn0w:

Using RecBoot:

1. After connecting the smartphone stuck in the loop to the computer, the RecBoot program is launched on the latter.
2. After recognizing your mobile phone, you need to select “Exit Recovery” in the program.
3. The device should reboot normally.

Sometimes programs are powerless. Therefore, you will have to restore the phone using firmware. It's important to remember to make backups to ensure you have the data you need.

What are the differences between DFU mode and recovery mode?

When it is not possible to restore a smartphone using the listed methods, DFU is used.

The disadvantages of this method are:

• updating the iOS operating system (although this may be a plus for some users);
• All user data will be deleted from the device (this is why it is so important to create backup copies of the phone - you can avoid this problem if something goes wrong with the device).

After connecting the device to the computer, you must turn off the phone. For 10 seconds, you should hold down 2 buttons: “Power” and “Home”. Then “Power” must be released, and “Home” must continue to be held. You must wait until the computer detects the device.

To enter the phone into DFU mode, it must be connected to the computer. iTunes identifies DFU as a recovery mode. But the computer reflects the device in DFU mode as a firmware update for the device.

You can remove the phone from DFU mode using a “cold restart”. It is performed using the same keys - “Power” and “Home” - within 10 seconds. Then you need to quickly press the “Power” button. The result should be the appearance of the Apple brand logo.

DFU mode is a useful function that allows you to return the device to life in a variety of situations and failures. With its help, you can restore or update iOS firmware when manipulation is impossible in normal mode. In cases where the phone refuses to boot in normal mode, DFU is the way out.

Conclusion

Before you start using your phone, you must carefully study the instructions for use to avoid unnecessary damage caused by ignorance. In addition, when downloading any application from the Internet (including various toys), you should make sure that the download is safe for the device, that is, it will not bring any viruses with it.

If, nevertheless, the phone could not be saved and it freezes or constantly reboots on its own, then resetting the settings can return it to normal operation. If this does not help, then you should contact the service center, because... Perhaps the problem lies in the breakdown of some parts. In this case, the recovery mode is powerless - technical repairs will be required, which are best left to specialists.

Solving the problem in a couple of clicks.

Although iPhones are recognized as smartphones that have a minimum of software bugs and problems, they still happen. Yes, there are not as many of them as on Android smartphones, but this obviously does not make it any easier for iPhone users who find themselves in a problematic situation. What should you do if your iPhone is stuck in recovery mode, keeps rebooting, or won't turn on at all after experiencing one of these bugs? In this review, we will talk about a truly life-saving utility, iMyFone Fixppo for Windows and Mac, which solves any such problem in a couple of clicks.

The iMyFone Fixppo utility has the ability to fix various software glitches on iOS devices. The program not only allows get iPhone and iPad out of recovery mode, but also cope with many other problems.

For example, the Apple logo is stuck on your iPhone and nothing helps to get rid of it. Or the iPhone went into a cyclic reboot, preventing normal use. Or the iPhone simply does not turn on, not responding in any way to pressing the “Power” button. The iMyFone Fixppo utility solves all such problems.

How to get iPhone out of recovery mode using iMyFone Fixppo utility?

Let's start by looking at the most common problem among iPhone and iPad users - the device gets stuck in recovery mode. Most often, this bug occurs when installing a new version of iOS. Moreover, you can “catch” the eternal recovery mode even with a safe installation of iOS over the air - you don’t have to use iTunes for this.

It's very easy to understand that your iPhone or iPad is stuck in recovery mode - the iTunes logo is displayed on the device's screen. Rebooting the device in such cases does not always help. In most cases, after a reboot, the depressing iTunes logo appears on the screen again.

iMyFone Fixppo frees iPhone and iPad from eternal recovery mode with the click of just one button. Previously, we reviewed many similar utilities, but we definitely haven’t seen such a simple way to solve the problem before.

In order to remove an iPhone or iPad from recovery mode in the utility, just select the item Enter/Exit Recovery Mode and connect the device to the computer. The program automatically detects a device that is in recovery mode and allows you to return it to working condition by pressing one button.

It takes less than 30 seconds to get your iPhone or iPad out of recovery mode. After this, the device immediately turns on, and the utility itself signals that the process was successful.

This mode makes it possible to enter the device into recovery mode. This option can be useful if you want to perform a clean installation of iOS on your iPhone or iPad.

iPhone won't turn on, Apple logo frozen, black screen, constant reboots? Any problem is easily solved

Others, including more serious software errors on iPhone and iPad, can also be resolved using the iMyFone Fixppo utility. To do this, the program has a Standard Mode, which is responsible for correcting a lot of various software failures.

The utility can fix popular problems associated with:

• Apple logo stuck on the screen
• the occurrence of cyclic reboots,
• inability to turn on iPhone or iPad,
• The device freezes with a completely black or white screen.

In all of the above cases, the work comes into play Standard Mode, which is also easy to use.

We tested this life-saving mode on an iPad Air that sat idle for several weeks with the Apple logo frozen on the screen. First of all, the utility automatically determines the device model and its firmware number, which is immediately offered to download. A very convenient option, since you don’t have to look for the required firmware on third-party resources and worry that the required version of iOS may not be suitable for a particular device.

After the firmware download is complete, all you have to do is press the button Start and enter the device in following the instructions on the screen. The utility itself “understands” what happened to your device and, again, automatically solves the problem. At the same time, which is very important, the program warns whether the recovery will be completed without data loss or whether the problem turned out to be so serious that data deletion cannot be avoided.

It took only 15 minutes to rid the iPad Air of the frozen Apple logo, of which 5 minutes were loading the firmware. Then the tablet was ready for full-fledged work. Moreover, the restoration took place without losing any data - all information and applications remained in place.

Fixing iTunes Errors

Many iPhone and iPad users prefer not to use iTunes due to its complexity and the possibility of various strange errors. For example, iTunes may tell you “Error 14 occurred while installing iOS” and leave it at that. The Apple utility does not provide any recommendations for further actions.

Luckily, iMyFone Fixppo can fix all the most common iTunes errors that users may encounter. The same Standard Mode is responsible for recovery, which requires just a few clicks to launch.

“Expert mode”: password reset on iPhone and iPad, solving complex problems

iMyFone Fixppo also has a special expert mode that allows you to get rid of the most difficult problems with iOS devices. For example, if the iPhone or iPad turned into a “brick” as a result of installing a new version of iOS and does not want to be restored to anything. Even using the standard mode of the iMyFone Fixppo utility.

When using expert mode, it is important to understand that its use implies a complete reset of the device during the recovery operation. In other words, the iPhone or iPad is reset to its factory state. However, when the gadget just sits there and doesn’t even turn on, the main task is to restore its functionality.

This is what the regime does Advanced Mode. Initially, like the normal mode, it determines the device model and downloads the required firmware for it. If the firmware was downloaded by the utility before, while using the normal mode, then you will not have to download it again.

Then all that remains is to enter your iPhone or iPad into DFU recovery mode by following the on-screen instructions. Then the utility does everything itself, namely, it finds out the cause of the failure and eliminates it. 15-20 minutes and the device “comes to life”.

An important feature of expert mode is the ability to reset the password on an iPhone or iPad. It is important to note that along with the password, all data is deleted from the device. In addition, after resetting the password, the device will require you to enter your Apple ID password. If you, as the owner of the gadget, have this data, then resetting a forgotten or accidentally set password will not be difficult.

Bottom line

iMyFone Fixppo is an excellent utility that can help out in a variety of situations. It is very effective, but at the same time extremely easy to use. Due to this, even inexperienced users will be able to save money and bring their iOS devices back to life without having to contact service centers.